Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel and Sun, Yanwen 2017. AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory. Journal of Materials Processing Technology 248 , pp. 236-248. 10.1016/j.jmatprotec.2017.05.028

[img]
Preview
PDF - Accepted Post-Print Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (1MB) | Preview

Abstract

This paper presents a novel mechanical material removal method to produce nanostructures with a precise control of their three dimensional (3D) surface topography. The method employs the tip of an atomic force microscope (AFM) probe as the cutting tool and a closed-loop high precision stage to control the machining path of the tip. In this approach, the tip only describes vertical motions while the stage is actuated along lateral directions in a raster scan strategy. The machining of features with 3D nanoscale topography in this way is the combined result of the tip applying a constant normal load on the sample while varying the distance (i.e. the feed) between two parallel lines of cut. More specifically, an increased feed leads to a reduced machining depth and vice-versa. Thus, the main difference with mechanical milling or turning at such small scale is that this method relies on the control of the feed to determine the machined depth. To support the interpretation of the process outcomes, an analytical model is developed. This model expresses the relationship between the feed and the machined depth as a function of the contact area between the tip and the material. The critical achievable slope of produced nanostructures was derived from this model and validated using experimental tests. This parameter corresponds to the maximum inclination of the surface of a nanostructure that can be machined with the proposed method. From the knowledge of the critical slope, the machining of periodic nanostructures was demonstrated on a single crystal copper workpiece. In principle, the method reported here could be implemented to any instrument with micro- and nano-indentation capabilities by exploiting their load-control feedback mechanism.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Centre for Advanced Manufacturing Systems At Cardiff (CAMSAC)
Engineering
Uncontrolled Keywords: Atomic force microscope; Mechanical nanomachining; Three dimensional micro and nano-structures; Scratching trajectory
Publisher: Elsevier
ISSN: 0924-0136
Date of First Compliant Deposit: 3 July 2017
Date of Acceptance: 23 May 2017
Last Modified: 26 Oct 2019 23:14
URI: http://orca.cf.ac.uk/id/eprint/101982

Citation Data

Cited 7 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics