Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Performance of single skin masonry walls subjected to hydraulic loading

Herbert, D. M., Gardner, D. R., Harbottle, M. and Hughes, T.G. 2018. Performance of single skin masonry walls subjected to hydraulic loading. Materials and Structures 51 , 97. 10.1617/s11527-018-1222-z

[img]
Preview
PDF - Published Version
Available under License Creative Commons Attribution.

Download (4MB) | Preview

Abstract

Property owners are facing increasing threats from flooding and in response are likely to turn to products designed to waterproof or ‘seal’ the outside of the building in an effort to prevent the ingress of flood water. However, very limited research has been conducted on the effect of this sealing action and the consequent hydraulic load acting upon the structure of the building. The theoretical safe application of waterproofing products has been suggested to be between 0.6 and 1 m (published guidance suggests 0.9 m), although the experimental evidence supporting these suggestions is either absent or limited in nature. This paper presents the findings of an experimental programme that has examined the effect of out-of-plane hydrostatic loading on masonry walls typical of domestic or commercial buildings. The study, conducted at 1/6th scale using a geotechnical centrifuge considers wall panels constructed from a variety of masonry units (autoclaved aerated concrete block, brick and brick-block) bound together with two different types of mortar. The wall panels were subject to an axial load representative of 1 storey of loading and were simply supported on all 4 sides. The load—out-of-plane deflection response of the panels was captured by a 3D digital image correlation system, and the water level at failure was compared to that predicted from previous research and the established yield line analysis method with encouraging results. When partial material and load factors were taken into consideration the results illustrated that a safe sealing height of 0.9 m, as quoted in the literature, would generally be inappropriate, whilst the safe sealing height of 0.6 m was not suitable for every case investigated. This supports the need for a suitable approach for the calculation of water levels at failure rather than the use of fixed values given in published literature.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Additional Information: This article is distributed under the terms of the Creative Commons Attribution 4.0 International License
Publisher: Springer Verlag
ISSN: 1359-5997
Date of First Compliant Deposit: 10 July 2018
Date of Acceptance: 29 June 2018
Last Modified: 27 Nov 2020 14:45
URI: http://orca.cf.ac.uk/id/eprint/113116

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics