Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

H-Band elevated CPW band-pass filters on GaAs substrate

Aghamoradi, F, McGregor, I and Elgaid, K 2010. H-Band elevated CPW band-pass filters on GaAs substrate. Presented at: 40th European Microwave Conference 2010, Paris, France, 28-30 September 2010. Proceedings 40th European Microwave Conference 2010. IEEE, -. 10.23919/EUMC.2010.5616390

Full text not available from this repository.

Abstract

This paper describes, for the first time, the design, fabrication and measurement of band-pass filters at H-band (220-320 GHz) frequency range. Two filters are considered, each using a different fabrication technology. The first uses conventional CPW and the second utilises a standard MMIC compatible airbridge process to elevate the ground and signal traces (ECPW) 8μm above a GaAs substrate. The ECPW filter achieves a 3 dB bandwidth of 78 GHz with an insertion loss of approximately 3 dB at the centre frequency of 211 GHz. When compared with the CPW filter, the ECPW circuit shows a performance enhancement of approximately 3 dB in insertion loss, a narrower bandwidth and a sharper roll-off characteristic. Simulated and experimental results over the range 0.01-320 GHz are compared and excellent agreement is obtained for both filters. The performance enhancement is thought to be due to the superior performance shown by ECPW short circuit stubs compared with their CPW counterparts. Results for such stubs at H-Band are also included and show a much narrower bandwidth and higher rejection in the ECPW case.

Item Type: Conference or Workshop Item (Paper)
Date Type: Published Online
Status: Published
Schools: Engineering
Publisher: IEEE
ISBN: 978-1-4244-7232-1
Last Modified: 11 Jun 2019 13:00
URI: http://orca.cf.ac.uk/id/eprint/122519

Actions (repository staff only)

Edit Item Edit Item