Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates

Mo, Liwu, Zhang, Feng, Deng, Min, Jin, Fei ORCID: https://orcid.org/0000-0003-0899-7063, Al-Tabbaa, Abir and Wang, Aiguo 2017. Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates. Cement and Concrete Composites 83 , pp. 138-145. 10.1016/j.cemconcomp.2017.07.018

[thumbnail of 1-s2.0-S0958946517301506-main.pdf] PDF - Published Version
Available under License Creative Commons Attribution.

Download (2MB)

Abstract

Steel slag has been used as supplementary cementitious materials or aggregates in concrete. However, the substitution levels of steel slag for Portland cement or natural aggregates were limited due to its low hydraulic property or latent volume instability. In this study, 60% of steel slag powders containing high free-CaO content, 20% of Portland cement and up to 20% of reactive magnesia and lime were mixed to prepare the binding blends. The binding blends were then used to cast concrete, in which up to 100% of natural aggregates (limestone and river sands) were replaced with steel slag aggregates. The concrete was exposed to carbonation curing with a concentration of 99.9% CO2 and a pressure of 0.10 MPa for different durations (1d, 3d, and 14d). The carbonation front, carbonate products, compressive strength, microstructure, and volume stability of the concrete were investigated. Results show that the compressive strength of the steel slag concrete after CO2 curing was significantly increased. The compressive strengths of concrete subjected to CO2 curing for 14d were up to five-fold greater than that of the corresponding concrete under conventional moist curing for 28d. This is attributed to the formation of calcium carbonates, leading to a microstructure densification of the concrete. Replacement of limestone and sand aggregates with steel slag aggregates also increased the compressive strengths of the concrete subjected to CO2 curing. In addition, the concrete pre-exposed to CO2 curing produced less expansion than the concrete pre-exposed to moist curing during the subsequent accelerated curing in 60 °C water. This study provides a potential approach to prepare concrete with low-carbon emissions via the accelerated carbonation of steel slag.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Additional Information: This is an open access article under the terms of the CC-BY Attribution 4.0 International license.
Publisher: Elsevier
ISSN: 0958-9465
Funders: EPSRC/NSFC
Date of First Compliant Deposit: 21 July 2020
Date of Acceptance: 18 July 2017
Last Modified: 04 May 2023 08:52
URI: https://orca.cardiff.ac.uk/id/eprint/133474

Citation Data

Cited 160 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics