Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Nano- and component level friction of rubber seals in dispensing devices

Prokopovich, Polina, Theodossiades, Stephanos, Rahnejat, Homer and Hodson, D. 2010. Nano- and component level friction of rubber seals in dispensing devices. Presented at: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, CA, USA, 30 August-2 September 2009. ASME Power Transmission and Gearing Conference; 3rd International Conference on Micro- and Nanosystems; 11th International Conference on Advanced Vehicle and Tire Technologies. ASME Conference Proceedings , vol. 6. New York: ASME, pp. 339-344. 10.1115/DETC2009-86035

Full text not available from this repository.

Abstract

In many drug dispensing devices, such as syringes and inhalers, a rubber ring is used as a seal. During device actuation the seal is subjected to friction which in turn causes it to deform. This can lead to suboptimal performance of the device and as a consequence variability in the delivered dose. Seal friction is complex, arising from adhesion of rubber in contact with a moving counterface, viscous action of a thin film of entrained fluid into the contact and ploughing of seal asperities. Therefore, the first step in the understanding of the conjunctional behaviour of rubber seals is the fundamental study of these friction mechanisms. A developed model can then be validated against measurements, prior to its use in a multi-body dynamic model of the inhaler valve to predict product performance, robustness and variability due to manufacturing tolerances. This paper undertakes two distinct studies. Firstly, a friction model for the rough elastomeric material, typically used for valve seals is developed. The model is then validated against measurements in nano-scale. Friction data is presented for nitrile rubber, using a silicon nitride AFM tip for nano-scale interactions. The validation is then extended to macro-scale motion of an instrumented trolley, incorporating an elastomeric surface sliding on a polymeric counterface. These tests are carried out for polybutylene terephthalate (PBT). Secondly, the validated friction model is used in an elastomeric seal model in-situ within the valve and in contact with a polymeric stem surface and subject to both global fittment deformation and canister pressure. Reasonable agreement is found between the measurements and model predictions for the nano-scale coefficient of friction of rubber against silicon nitride. Similarly, good agreement has been obtained for the mean coefficient of friction of rubber against PBT. In addition, the mechanism of adhesion between contacting surfaces of gasket and stem is taken into account.

Item Type: Conference or Workshop Item (Paper)
Date Type: Publication
Status: Published
Schools: Engineering
Pharmacy
Subjects: R Medicine > RS Pharmacy and materia medica
T Technology > TA Engineering (General). Civil engineering (General)
Additional Information: Paper no. DETC2009-86035, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2009) August 30–September 2, 2009, San Diego, California, USA
Publisher: ASME
ISBN: 9780791849033
Last Modified: 28 Jun 2019 02:35
URI: http://orca.cf.ac.uk/id/eprint/14645

Actions (repository staff only)

Edit Item Edit Item