Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2014. Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation. Surface Topography: Metrology and Properties 2 (2) , 025001. 10.1088/2051-672X/2/2/025001

[img] PDF - Published Version
Available under License Creative Commons Attribution.

Download (1MB)

Abstract

The controlled removal of material conducted with the tip of an atomic force microscope (AFM) probe is a technique that has started gaining increased attention in recent years within the micro and nano manufacturing research community. The attractive characteristics of this process are that it is relatively simple to implement and low-cost compared with vacuum-based lithography techniques for micro and nano fabrication. However, similarly to any machining process, the resulting surface finish of features cut with an AFM probe can be critical. In this context, the focus of the paper is on the development and validation of a novel analytical model for predicting the floor surface roughness induced by AFM probe-based machining when generating cavities composed of linear parallel grooves. In addition to kinematic parameters, the proposed model takes into account the minimum chip thickness and elastic recovery associated with each phase present within the microstructure of a workpiece. The implementation of the model was carried out and its performance tested when processing a dual phase brass alloy using an AFM nano-indentation probe. A relatively good agreement was achieved between the analytical and experimental results with an average prediction error of 21% when assessing the arithmetic average roughness, Ra.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Centre for Advanced Manufacturing Systems At Cardiff (CAMSAC)
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TS Manufactures
Additional Information: Online publication date: 23 December 2013.
Publisher: IOP Publishing
ISSN: 2051-672X
Funders: EPSRC
Date of First Compliant Deposit: 30 March 2016
Last Modified: 21 Feb 2019 10:19
URI: http://orca.cf.ac.uk/id/eprint/53930

Citation Data

Cited 9 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics