Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Pitch/coke wetting behaviour

Garcia Rocha, Victoria, Blanco, C., Santamaria, R., Diestre, E., Menendez, R. and Granda, M. 2005. Pitch/coke wetting behaviour. Fuel 84 (12-13) , pp. 1550-1556. 10.1016/j.fuel.2005.02.007

Full text not available from this repository.

Abstract

The mechanisms of pitch/coke interactions at the mixing stage were studied by a spreading drop test, using a bed of calcined petroleum coke as substrate. For this purpose, three petroleum pitches and a binder coal–tar pitch, which was selected as a reference, were used. The results show that pitch wetting behaviour is related to both pitch surface tension and pitch viscosity. Low values of surface tension and viscosity are required for the pitch to spread and penetrate into the coke bed at temperatures below 160 °C. The non-wetting behaviour observed in some petroleum pitches was ascribed to oxidation processes, as demonstrated by the fact that the non-wetting pitch behaviour can be improved by using an inert atmosphere and/or increasing the heating rate during the spreading drop test. Additionally, the use of blends of wetting and non-wetting pitches and the addition of active surface agents contributes significantly to modifying the wetting behaviour of non-wetting pitches. From the results obtained, a relationship between surface tension–viscosity and pitch wetting behaviour was established.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Uncontrolled Keywords: Coke; Petroleum pitch; Blending; Additives; Wetting
Publisher: Elsevier
ISSN: 0016-2361
Date of Acceptance: 8 February 2005
Last Modified: 04 Jun 2017 09:19
URI: http://orca.cf.ac.uk/id/eprint/93356

Citation Data

Cited 32 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item