Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study

Giasin, Khaled, Hodzic, Alma, Phadnis, Vaibhav and Ayvar-Soberanis, Sabino 2016. Assessment of cutting forces and hole quality in drilling Al2024 aluminium alloy: experimental and finite element study. International Journal of Advanced Manufacturing Technology 87 (5-8) , pp. 2041-2061. 10.1007/s00170-016-8563-y

Full text not available from this repository.

Abstract

Machining experiments were conducted to evaluate the impact of cutting parameters on the hole quality and cutting forces in drilling Al2024-T3 aerospace alloy. Al2024-T3 specimen were drilled using Φ6-mm TiAlN-coated carbide twist drills under dry cutting conditions. The hole quality was inspected in terms of its surface roughness, burr and chip formations, hole size, circularity error and post-machining microhardness of the subsurface of the holes. An analysis of variance (ANOVA) was carried out to determine the percentage contribution of cutting parameters on cutting forces and the inspected hole quality parameters. A three-dimensional (3D) finite element (FE) model of drilling Al2024-T3 is developed using Abaqus/Explicit to predict thrust force and torque. The FE model was validated using experimental results and found to be in good agreement. The results of the study showed that the cutting parameters have a significant impact on cutting forces and inspected hole quality parameters. Drilling at feed rates of 100 and 300 mm/min and spindle speeds of 1000, 3000, and 6000 rpm are recommended for producing holes with smaller surface roughness, deviation from nominal hole size, circularity error and burrs.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Subjects: T Technology > TJ Mechanical engineering and machinery
Uncontrolled Keywords: Drilling; Al2024 ;Burr formation; Surface roughness; Hardness; Finite element analysis
Publisher: Springer Verlag
ISSN: 0268-3768
Date of Acceptance: 29 February 2016
Last Modified: 10 Jul 2019 13:09
URI: http://orca.cf.ac.uk/id/eprint/98763

Citation Data

Cited 15 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item