Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by All Cardiff Authors

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 95.

Giasin, Khaled, Gorey, G., Byrne, Carlton, Sinke, J. and Brousseau, Emmanuel 2019. Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates. Composite Structures 212 , pp. 159-174. 10.1016/j.compstruct.2019.01.023
Item availability restricted.
file

Kumar, D., Stoichkov, V., Brousseau, E., Smith, G. C. and Kettle, J. 2019. High performing AgNW transparent conducting electrodes with a sheet resistance of 2.5 ? Sq?1 based upon a roll-to-roll compatible post-processing technique. Nanoscale , -. 10.1039/C8NR07974A
Item availability restricted.
file

Geng, Yanquan, Yan, Yongda, Wang, Jiqiang, Brousseau, Emmanuel, Sun, Yanwen and Sun, Yazhou 2018. Fabrication of periodic nanostructures using AFM tip-based nanomachining: combining groove and material pile-Up topographies. Engineering 4 (6) , pp. 787-795. 10.1016/j.eng.2018.09.010
file

Jones, Josh, Brousseau, Emmanuel and Read, Daniel 2018. AFM tip-based cutting of grooves on permalloy nanowires for controlling the motion of magnetic domain walls. Presented at: World Congress on Micro and Nano Manufacturing, Portoroz, Slovenia, 18-20 September 2018. 10.3850/978-981-11-2728-1_44
file

Vella, Pierre C., Dimov, Stefan S., Minev, Roussi and Brousseau, Emmanuel B. 2018. Technology maturity assessment of micro and nano manufacturing processes and process chains. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (8) , pp. 1362-1383. 10.1177/0954405416668922

Mandal, Soumen, Thomas, Evan, Gines, Laia, Morgan, David, Green, Joshua, Brousseau, Emmanuel and Williams, Oliver 2018. Redox agent enhanced chemical mechanical polishing of thin film diamond. Carbon 130 , pp. 25-30. 10.1016/j.carbon.2017.12.077
file

He, Yang, Yan, Yongda, Geng, Yanquan and Brousseau, Emmanuel 2018. Fabrication of periodic nanostructures using dynamic plowing lithography with the tip of an atomic force microscope. Applied Surface Science 427 (A) , pp. 1076-1083. 10.1016/j.apsusc.2017.08.134
file

Geng, Yanquan, Brousseau, Emmanuel, Zhao, Xuesen, Gensheimer, Michael and Bowen, C R 2018. AFM tip-based nanomachining with increased cutting speed at the tool-workpiece interface. Precision Engineering 51 , pp. 536-544. 10.1016/j.precisioneng.2017.10.009
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel and Sun, Yanwen 2017. AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory. Journal of Materials Processing Technology 248 , pp. 236-248. 10.1016/j.jmatprotec.2017.05.028
Item availability restricted.
file

Brousseau, Emmanuel, Thiery, S., Arnal, B., Nyiri, E., Gibaru, O. and Mayor, J. R. 2017. A Computer-Aided Design and manufacturing implementation of the atomic force microscope tip-based nanomachining process for two-dimensional patterning. Journal of Micro and Nano-Manufacturing 5 (4) , 041003. 10.1115/1.4037694

Alraziqi, Zaynab Naif Rasheed, Brousseau, Emmanuel Bruno Jean Paul and Borodich, Feodor M. 2017. A new metric to assess the tip condition of AFM probes based on three-dimensional data. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE), Newcastle upon Tyne, UK, 20-21 October 2016. Students on Applied Engineering (ICSAE), International Conference for. IEEE, pp. 24-29. 10.1109/ICSAE.2016.7810155

Brousseau, Emmanuel Bruno Jean Paul, Geng, Yanquan, Gensheimer, Michael and Bowen, Chris 2017. Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface. Presented at: 2017 World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan, 27-30 March 2017. 2017 World Congress on Micro and Nano Manufacturing. pp. 343-346.

Werrell, Jessica, Mandal, Soumen, Thomas, Evan L. H., Brousseau, Emmanuel Bruno Jean Paul, Lewis, Ryan, Borri, Paola, Davies, Philip Rosser and Williams, Oliver Aneurin 2017. Effect of slurry composition on the chemical mechanical polishing of thin diamond films. Science and Technology of Advanced Materials 18 (1) , pp. 654-663. 10.1080/14686996.2017.1366815.
file

Ding, Ziqian, Stoichkov, Vasil, Horie, Masaki, Brousseau, Emmanuel Bruno Jean-Paul and Kettle, Jeffrey 2016. Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications. Solar Energy Materials & Solar Cells 157 , pp. 305-311. 10.1016/j.solmat.2016.05.053
file

Ulmeanu, M., Petkov, Petko, Ursescu, D., Jipa, F., Harniman, R, Brousseau, Emmanuel Bruno Jean Paul and Ashfold, M. 2016. Substrate surface patterning by optical near field modulation around colloidal particles immersed in a liquid. Optics Express 24 (24) , pp. 27340-27351. 10.1364/OE.24.027340
file

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel Bruno Jean-Paul, Cui, Xing, Yu, Bowen, Zhao, Xuesen and Hu, Zhenjiang 2016. Machining complex three-dimensional nanostructures with an atomic force microscope through the frequency control of the tip reciprocating motions. Journal of Manufacturing Science and Engineering 138 (12) , 124501 (8 pages). 10.1115/1.4034892

Geng, Yanquan, Yan, Yongda, Brousseau, Emmanuel Bruno Jean Paul, Yu, Bowen, Qu, Shengnan, Hu, Zhenjiang and Zhao, Xuesen 2016. Processing outcomes of the AFM probe-based machining approach with different feed directions. Precision Engineering 46 , pp. 288-300. 10.1016/j.precisioneng.2016.05.009
file

Al-Musawi, Raheem, Brousseau, Emmanuel, Geng, Yanquan and Borodich, Feodor 2016. Insight into mechanics of AFM tip-based nanomachining: bending of cantilevers and machined grooves. Nanotechnology 27 (38) , pp. 385302-385316. 10.1088/0957-4484/27/38/385302
file

Alraziqi, Zaynab, Mukhtar, Nur Farah Hafizah and Brousseau, Emmanuel Bruno Jean-Paul 2016. Comparison of two AFM probe inspection techniques for three-dimensional tip characterisation. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. EUSPEN,

Al-Musawi, Raheem and Brousseau, Emmanuel Bruno Jean-Paul 2016. Influence of the mechanical behaviour of cantilevers on the topography of nano-scale grooves during AFM tip-based machining. Presented at: EUSPEN: 16th International Conference & Exhibition, Nottingham, UK, 30 May - 3 June 2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. EUSPEN,

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul 2016. Simulation and experimental study of nanosecond laser micromachining of commercially pure titanium. Journal of Micro and Nano-Manufacturing 4 (1) , 011004. 10.1115/1.4031892

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul 2016. Nanosecond laser processing of Zr41.2Ti13.8Cu12.5Ni10Be22.5 with single pulses. Journal of Materials Processing Technology 232 , pp. 34-42. 10.1016/j.jmatprotec.2016.01.023
file

Alraziqi, Zaynab, Mukhtar, Nur Farah Hafizah and Brousseau, Emmanuel 2016. Comparison of two AFM probe inspection techniques for three-dimensional tip characterization. Presented at: 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016, University of Nottingham, Nottingham, United Kingdom, 30 May - 3 June 2016. Published in: Bointon, P., Leach, Ronald K. and Southon, N. eds. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. Cranfield, Bedfordshire, UK: euspen, pp. 639-646.

Al-Musawi, Raheem Sadoon Jamel and Brousseau, Emmanuel Bruno Jean Paul 2016. Assessing the applied normal load during contact mode AFM: An issue with the conventional approach. Presented at: 2016 International Conference for Students on Applied Engineering (ICSAE), Newcastle upon Tyne, UK, 20-21 October 2016. Students on Applied Engineering (ICSAE), International Conference for. IEEE, pp. 119-122. 10.1109/ICSAE.2016.7810172

Williams, Eleri, Brousseau, Emmanuel, Lavery, Nick, Mehraban, Shahin, Keast, Victoria, Hughes, Colan and Harris, Kenneth 2016. Nanosecond laser milling of the amorphous alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5. Presented at: 11 th International Conference on Multi-Material Micro Manufacture (4M2016), co-organised with 10th International Workshop on Microfactories (IWMF2016), Lyngby, Denmark,, 13-15 September 2016.

Ulmeanu, M., Petkov, Petko, Ursescu, D., Maraloiu, V. A., Jipa, F., Brousseau, Emmanuel Bruno Jean Paul and Ashfold, M. N. R. 2015. Pattern formation on silicon by laser-initiated liquid-assisted colloidal lithography. Nanotechnology 26 (45) , 455303. 10.1088/0957-4484/26/45/455303

Brousseau, Emmanuel Bruno Jean Paul, Al-Musawi, Raheem and Lebiez, Damien 2015. A hybrid roll-to-roll AFM set-up for high throughput tip-based nano-machining. Manufacturing Letters 6 , pp. 10-13. 10.1016/j.mfglet.2015.11.002

Lynch, C., Richards, C., Dorrington, P., Brousseau, Emmanuel Bruno Jean Paul and Turner, M. 2015. Measurement of forces from epidural catheter insertion. Anaesthesia 70 (10) , pp. 1215-1216. 10.1111/anae.13214

Brousseau, Emmanuel Bruno Jean Paul, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric and Gibaru, Olivier 2015. A simple and generic CAD/CAM approach for AFM probe-based machining. Presented at: 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015, University of Huddersfield, West Yorkshire, UK, 17-18 March 2015. pp. 362-368.

Prokopovich, Polina, Kobrick, Mathias, Brousseau, Emmanuel Bruno Jean Paul and Perni, Stefano 2015. Potent antimicrobial activity of bone cement encapsulating silver nanoparticles capped with oleic acid. Journal of Biomedical Materials Research: Part B - Applied Biomaterials 103 (2) , pp. 273-281. 10.1002/jbm.b.33196
file

Vella, Pierre, Dimov, Stefan, Brousseau, Emmanuel Bruno Jean Paul and Whiteside, Ben 2015. A new process chain for producing bulk metallic glass replication masters with micro-and nano-scale features. International Journal of Advanced Manufacturing Technology 76 (1-4) , pp. 523-543. 10.1007/s00170-014-6148-1

Preedy, Emily Callard, Brousseau, Emmanuel Bruno Jean Paul, Evans, Samuel Lewin, Perni, Stefano and Prokopovich, Polina 2014. Adhesive forces and surface properties of cold gas plasma treated UHMWPE. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460 , pp. 83-89. 10.1016/j.colsurfa.2014.03.052
file

Elderrat, Haithem, Davies, Huw Charles and Brousseau, Emmanuel Bruno Jean Paul 2014. Investigation of the foam filled fluid technology for anti-vibration devices. International Journal of Structural Analysis & Design 1 (3) , pp. 182-187.

Williams, Eleri, Brousseau, Emmanuel Bruno Jean Paul and Rees, Andrew 2014. Nanosecond Yb fibre laser milling of aluminium: effect of process parameters on the achievable surface finish and machining efficiency. International Journal of Advanced Manufacturing Technology 74 (5-8) , pp. 769-780. 10.1007/s00170-014-6038-6

Thomas, Evan L. H., Mandal, Soumen, Brousseau, Emmanuel Bruno Jean Paul and Williams, Oliver Aneurin 2014. Silica based polishing of {100} and {111} single crystal diamond. Science and Technology of Advanced Materials 15 (3) , pp. 1-7. 10.1088/1468-6996/15/3/035013
file

Elderrat, Haithem, Davies, Huw Charles and Brousseau, Emmanuel Bruno Jean Paul 2014. Investigation of the foam filled fluid technology for anti-vibration devices. Presented at: Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2014, London, England, 1-2 June 2014. Published in: Kumar, Rakesh ed. Proceedings of the International Conference on Proceedings on Advances in Civil, Structural and Mechanical Engineering - CSM 2014. Santa Barbara, CA: Institute of Research Engineers and Doctors, pp. 86-90. 10.15224/ 978-1-63248-012-5-75

Omar, Fuad, Brousseau, Emmanuel, Elkaseer, Ahmed, Kolew, Alexander, Prokopovich, Polina and Dimov, Stefan 2014. Development and experimental validation of an analytical model to predict the demoulding force in hot embossing. Journal of Micromechanics and Microengineering 24 (5) , 055007. 10.1088/0960-1317/24/5/055007
file

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2014. Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation. Surface Topography: Metrology and Properties 2 (2) , 025001. 10.1088/2051-672X/2/2/025001
file

Ulmeanu, Magdalena, Petkov, Petko Vladev, Hirshy, Hassan and Brousseau, Emmanuel Bruno Jean Paul 2014. Formation of ordered arrays of Si and GaAs nanostructures by single-shot laser irradiation in near-field at the solid/liquid interface. Materials Research Express 1 (1) , 015030. 10.1088/2053-1591/1/1/015030

Mukhtar, Nur Farah Hafizah, Brousseau, Emmanuel Bruno Jean Paul and Prickett, Paul William 2014. Study of silicon tip wear during AFM probe-based machining of single crystal copper. Presented at: Ninth International Conference on MicroManufacturing (ICOMM 2014), Nanyang Technological University (NTU) and National University of Singapore (NUS), Singapore, 25-28 March 2014.

Islam, Nazrul and Brousseau, Emmanuel Bruno Jean Paul 2014. Implementing a multi-staged methodology to micro and nanotechnology: technology maturity assessment and framework. International Journal of Productivity and Performance Management 63 (2) , pp. 170-193. 10.1108/IJPPM-01-2013-0010

Hashoosh, Ahmed, Hirshy, Hassan, Brousseau, Emmanuel Bruno Jean Paul and Moosa, Ahmed 2013. Fabrication of aluminium nanowires by differential pressure injection. ISRN Nanomaterials 2013 , 132798. 10.1155/2013/132798

Rees, Andrew, Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Bigot, Samuel and Griffiths, Christian Andrew 2013. Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding. International Journal of Advanced Manufacturing Technology 64 (9-12) , pp. 1395-1410. 10.1007/s00170-012-4110-7

Kettle, J., Rees, A., Brousseau, Emmanuel Bruno John Paul and Horie, M. 2013. Low-temperature thermal nanoimprint lithography of anti-reflective structures for flexible low band gap organic solar cells. Journal of Physics D: Applied Physics 46 (10) , 105102. 10.1088/0022-3727/46/10/105102

Brousseau, Emmanuel Bruno Jean Paul, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric, Gibaru, Olivier and Mayor, J. Rhett 2013. Towards CNC automation in AFM probe-based nano machining. Presented at: 8th International Conference on Manufacturing (ICOMM 2012), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM 2013). International Conference on MicroManufacturing, pp. 499-506.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul and Hirshy, Hassan 2013. Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing. Journal of Micro and Nano-Manufacturing 1 (2) , 021002. 10.1115/1.4024097

Vella, Pierre, Dimov, Stefan, Whiteside, Ben, Brousseau, Emmanuel Bruno Jean Paul, Tuinea-Bobe, Cristina, Gant, Colin, Minev, Ekaterin and Petkov, Petko Vladev 2013. Validation of a new process chain for producing bulk metallic glass replication masters with micro and nano-scale features. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 103-108.

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul 2013. Single pulse nanosecond laser processing of zirconium-based bulk metallic glass. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 152-155.

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2013. Surface roughness prediction in AFM probe-based machining. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 97-100.

Omar, Fuad, Elkaseer, Ahmed, Brousseau, Emmanuel, Kolew, Alexander and Prokopovich, Polina 2013. Demoulding forces in hot embossing: Model development and validation. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM2013). pp. 642-649.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul and Hirshy, Hassan 2012. Process factors influence on residual layer uniformity in hot embossing. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012. Published in: Noll, Humbert, Adamovic, Nadja and Dimov, Stefan eds. Multi-Material Micro Manufacture Proceedings of the 9th International Conference on. Singapore: Research Publishing, pp. 81-84. 10.3850/978-981-07-3353-7_302

Elkaseer, Ahmed and Brousseau, Emmanuel Bruno Jean Paul 2012. AFM probe-based mechanical machining: Modelling of the surface generation process. Presented at: 7th International Conference on MicroManufacturing (ICOMM2012), Chicago, IL USA, 12-14 March 2012. Proceedings of the 7th International Conference on MicroManufacturing (ICOMM2012. International Conference on MicroManufacturing, pp. 78-84.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Minev, Roussi and Bigot, Samuel 2012. Micro- and nano-manufacturing: Challenges and opportunities. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 226 (1) , pp. 3-15. 10.1177/0954406211422972

Brousseau, Emmanuel Bruno Jean Paul and Eldukhri, Eldaw Elzaki 2011. Recent advances on key technologies for innovative manufacturing. Journal of Intelligent Manufacturing 22 (5) , pp. 675-691. 10.1007/s10845-009-0328-0

Scholz, Steffen Gerhard, Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Lalev, Georgi M. and Petkov, Petko Vladev 2011. Manufacturing routes for replicating micro and nano surface structures with bio-mimetic applications. CIRP Journal of Manufacturing Science and Technology 4 (4) , pp. 347-356. 10.1016/j.cirpj.2011.05.004

Vella, Pierre C., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Minev, Ekaterin, Dobrev, Todor, Petkov, Petko Vladev and Velkova, Valentina 2011. Length scale integration: implementation of a new process chain for producing replication masters with micro and nano scale features. Presented at: 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, Germany, 8–10 November 2011. Published in: Kück, Heinz, Reinecke, Holger and Dimov, Stefan Simeonov eds. Proceedings of the 8th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 343-347. 10.3850/978-981-07-0319-6_223

Brousseau, Emmanuel Bruno Jean Paul, Krohs, F., Caillaud, E., Dimov, Stefan Simeonov, Gibaru, O. and Fatikow, S. 2010. Development of a novel process chain based on Atomic Force Microscopy scratching for small and medium series production of polymer nanostructured components. Journal of Manufacturing Science and Engineering 132 (3) , pp. 305-315. 10.1115/1.4001481

Griffiths, Christian Andrew, Bigot, Samuel, Brousseau, Emmanuel Bruno Jean Paul, Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 111-123. 10.1007/s00170-009-2038-3

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Chouquet, C., Gavillet, J. and Bigot, Samuel 2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 99-110. 10.1007/s00170-009-2000-4

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Some recent advances in multi-material micro- and nano- manufacturing. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 161-180. 10.1007/s00170-009-2214-5

Ferri, C., Faraway, J. and Brousseau, Emmanuel Bruno Jean Paul 2010. Calibration of a white light interferometer for the measurement of micro-scale dimensions. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 125-135. 10.1007/s00170-009-2050-7

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Minev, Ekaterin and Matthews, C. 2010. Methodology for capability maturity assessment of MNT chains. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 249-252.

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Scholz, S. and Matthews, C. 2010. Capability maturity study of the horizontal and vertical integration of structuring, patterning and characterisation MNTs. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 253-256.

Brousseau, Emmanuel Bruno Jean Paul, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel 2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France, pp. 329-336.

Brousseau, Emmanuel Bruno Jean Paul, Scholz, S. and Rees, A. 2010. Fabrication of 3D structures using Atomic Force Microscopy scratching. Presented at: Sixth International Conference on Multi-Material Micro Manufacture, 4M2010, Oyonnax, France, pp. 65-68.

Vella, P. C., Brousseau, Emmanuel Bruno Jean Paul, Minev, R. and Dimov, Stefan Simeonov 2010. A methodology for technology maturity assessment of micro and nano manufacturing processes and process chains. Presented at: 5th International Conference on Micro Manufacturing (ICOMM/4M2010), Madison, USA, pp. 327-334.

Barton, R. and Brousseau, Emmanuel Bruno Jean Paul 2009. Application of a methodology for assessing technology maturity. Presented at: Conference of the International Association for Management of Technology, (EuroMOT 2009), Glasgow, UK,

Bigot, Samuel, Islam, N., Wong, H., Brousseau, Emmanuel Bruno Jean Paul and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia,

Brousseau, Emmanuel Bruno Jean Paul, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel 2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 257-262.

Brousseau, Emmanuel Bruno Jean Paul, Krohs, F., Dimov, Stefan Simeonov, Griffiths, C. A., Scholz, S. G., Rees, A. and Fatikow, S. 2009. Investigation of a new process chain based on atomic force microscopy scratching. Presented at: Fifth International Conference on Multi-Material Micro Manufacture, 4M2009, Karlsruhe, Germany, pp. 267-270.

Scholz, Steffen Gerhard, Petkov, Petko Vladev, Brousseau, Emmanuel Bruno Jean Paul, Griffiths, Christian Andrew, Hirshy, Hassan and Dimov, Stefan Simeonov 2009. Process chain for replicating bio inspired micro structured surfaces. Presented at: 4M 2009: 6th International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, 23-25 September 2009. Published in: Saile, V. and Ehmann, K. eds. Proceedings of 4M 2009: 6th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 271-274. 10.3850/4M2009RP001_9054

Dimov, Stefan Simeonov, Matthews, C. W., Brousseau, Emmanuel Bruno Jean Paul, Bigot, Samuel, de Grave, A., Fillon, B., Weinzierl, M., Engel, U., Johander, P., Jung, E., Kirby, P. B., Mattsson, L., Richter, M. and Schoth, A. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany, pp. 1-9.

Scholz, Steffen Gerhard, Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Lalev, Georgi Maximov and Petkov, Petko Vladev 2009. New process chains for replicating micro and nano structured surfaces with bio-mimetic applications. Presented at: Society of Plastics Engineers Annual Technical Conference (ANTEC2009), Chicago, USA, pp. 3021-3027.

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul 2008. Variability in Measurements of Micro Lengths with a White Light Interferometer. Quality and Reliability Engineering International 24 (8) , pp. 881-890. 10.1002/qre.903

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Packianather, Michael Sylvester 2008. The finite element analysis of melt flow behaviour in micro-injection moulding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1107-1118. 10.1243/09544054JEM965

Mattsson, L., Bolt, P. J., Azcarate, S., Brousseau, Emmanuel Bruno Jean Paul, Fillon, B, Fowler, C., Gelink, E., Griffiths, C., Khan, Malek C., Marson, S., Retolaza, S., Schneider, A., Schoth, A., Temun, A., Tiquet, P. and Tosello, G. 2008. Reliability of surface roughness measurements of micro features - experiences of a round robin test with nine 4M laboratories. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan eds. 4M 2008: Proceedings of the 4th International Conference on Multi-material Micro Manufacture. Whittles,

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Chouquet, C., Gavillet, J. and Bigot, Samuel 2008. Micro-injection moulding: surface treatment effects on part demoulding. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 245-248.

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Packianather, Michael Sylvester 2008. Micro injection moulding: simulation of melt flow behaviour. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 267-270.

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Setchi, Rossitza 2008. Knowledge acquisition techniques for feature recognition in CAD models. Journal of Intelligent Manufacturing 19 (1) , pp. 21-32. 10.1007/s10845-007-0043-7

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul 2008. Micro injection moulding: the influence of runner systems on flow behaviour and melt fill of multiple microcavities. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222 (9) , pp. 1119-1130. 10.1243/09544054JEM1084

Griffiths, C. A., Dimov, Stefan Simeonov and Brousseau, Emmanuel Bruno Jean Paul 2008. Micro injection moulding: an experimental study on the relationship between the filling of micro parts and runner designs. Presented at: 4th International Conference on Multi-Material Micro Manufacture (4M), Cardiff, UK, 9-11 September 2008. Published in: Dimov, S. and Menz, W. eds. 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, UK. Dunbeath: Whittles, pp. 217-220.

Matovic, J., Kettle, J., Brousseau, Emmanuel Bruno Jean Paul and Adamovic, N. 2008. Patterning of nanomembranes with a focused-ion-beam. Presented at: 26th International Conference on Microelectronics( MIEL 2008), Nis, Serbia, pp. 103-106.

Krohs, F., Luttermann, T., Stolle, C., Fatikow, S., Brousseau, Emmanuel Bruno Jean Paul and Dimov, Stefan Simeonov 2008. Towards automation in AFM based nanomanipulation and electron beam induced deposition for microstructuring. Presented at: International Conference on Multi-Material Micro Manufacture, Cardiff, UK, 9-11 September 2008. Published in: Menz, Wolfgang and Dimov, Stefan Simeonov eds. 4M 2008: Fourth International Conference on Multi-Material Micro Manufacture, 9th-11th September 2008, Cardiff, Wales. Dunbeath: Whittles, pp. 118-123.

Rees, Andrew, Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov, Gruber, H. and Paganetti, I. 2008. Wire electro discharge grinding: surface finish optimisation. Presented at: 4th International Conference on Multi-Material Micro Manufacture, Cardiff, UK, pp. 233-236.

Charmeux, J. F., Minev, R., Dimov, Stefan, Minev, Ekaterin, Brousseau, Emmanuel Bruno Jean Paul and Harrysson, U. 2007. Benchmarking of three processes for producing castings incorporating micro/meso-scale features with a high aspect ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (4) , pp. 577-588. 10.1243/09544054JEM693

Griffiths, C. A., Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Hoyle, R. T. 2007. The effects of tool surface quality in micro injection moulding. Journal of Materials Processing Technology 189 (1-3) , pp. 418-427. 10.1016/j.jmatprotec.2007.02.022

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Setchi, Rossitza 2007. A hybrid method for feature recognition in CAD models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , pp. 79-96.

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul 2007. Critical analysis of an existing calibration procedure built in a white light interferometer microscope and proposal of an alternative spline-based approach. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. 4m 2007 : third International Conference on Multi-material Micro Manufacture : 3rd-5th October 2007, Borovets, Bulgaria. Dunbeath: Whittles, pp. 169-172.

Griffiths, C. A., Bigot, Samuel, Brousseau, Emmanuel Bruno Jean Paul, Worgull, M., Heckele, M., Nestler, J. and J., Auerswald 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.

Pham, Duc Truong, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul, Bigot, Samuel, Dobrev, T., Ferri, C., Gandarias, Endika, Hoyle, R. T., Griffiths, C. A., Kettle, J., Lalev, G. M., Li, W., Matthews, C. W., Minev, Roussi, Petkov, Petko Vladev, Packianather, Michael Sylvester, Petrelli, A., Popov, Krastimir Borisov, Rees, A., Sha, B., Thomas, A. and Zhao, H. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK, pp. 24-33.

Ferri, C., Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Mattsson, L. 2006. Repeatability analysis of two methods for height measurements in the micrometer range. Presented at: 4M2006: Second International Conference on Multi-Material Micro Manufacture, Grenoble, France, 22-26 September 2006. Published in: Dimov, S., Menz, W. and Fillon, B. eds. 4M 2006 - Second International Conference on Multi-Material Micro Manufacture (Grenoble, France, 22-26 September 2006). Elsevier, pp. 165-168.

Brousseau, Emmanuel Bruno Jean Paul, Dimov, Stefan Simeonov and Setchi, Rossitza 2006. Learning and reasoning techniques for automatic feature recognition for CAD models. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, pp. 77-82.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul and Setchi, Rossitza 2005. Automatic extraction of rules for feature recognition in solid models. Presented at: 1st I*PROMS: Intelligent Production Machines and Systems, Online, 4-15 July 2005. Published in: Pham, D. ed. Intelligent Production Machines And Systems - First I*proms Virtual Conference Proceedings. Elsevier, pp. 49-54.

Pham, Duc Truong, Dimov, Stefan Simeonov, Setchi, Rossitza M., Peat, Bernard, Soroka, Anthony John, Brousseau, Emmanuel Bruno Jean Paul, Huneiti, Ammar M., Lagos, Nikolaos, Noyvirt, Alexander Emilov, Pasantonopoulos, Charilaos, Tsaneva, Daniela K. and Tang, Qiao 2004. Product lifecycle management for performance support. Journal of Computing and Information Science in Engineering 4 (4) , pp. 305-315. 10.1115/1.1818687

Dimov, Stefan Simeonov, Setchi, Rossitza and Brousseau, Emmanuel Bruno Jean Paul 2004. Automatic feature recognition a hybrid approach. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 04) (Bath,UK). University of Bath, p. 59.

This list was generated on Thu Mar 21 07:59:33 2019 GMT.