Browse by Current Cardiff authors

Prickett, Paul, Setchi, Rossitza and Romli, Awanis 2018. Eco-design case-based reasoning tool: the integration of ecological quality function deployment and case-based reasoning methods for supporting sustainable product design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (10) , pp. 1778-1797. 10.1177/0954405416668928

O'Regan, Paul, Prickett, Paul and Lacan, Franck 2018. Selective laser melting: the use of metrology to assure process integrity. Presented at: 2018 ASPE and euspen Summer Topical Meeting, Lawrence Berkeley National Laboratory,Berkeley, California, USA, 22 to 25 July 2018. Advancing Precision in Additive Manufacturing. Raleigh, USA: The American Society for Precision Engineering, pp. 143-149.

Hill, Jacob, Prickett, Paul, Grosvenor, Roger and Hankins, Gareth 2018. CNC spindle signal investigation for the prediction of cutting tool health. Presented at: Fourth European Conference of the PHM Society, Utrecht, The Netherlands, 3-6 July 2018. Proceedings of the European Conference of the PHM Society. Prognostics and Health Management Society,

Allmark, Matthew, Prickett, Paul, Grosvenor, Roger and Frost, Carwyn 2018. The specification and testing of a Horizontal Axis Tidal Turbine Rotor Monitoring approach. International Journal of Prognostics and Health Management 9 (2) , pp. 1-15. 10.17035/d.2018.0055962840

Allmark, Matthew, Grosvenor, Roger Ivor and Prickett, Paul William 2017. An approach to the characterisation of the performance of a tidal stream turbine. Renewable Energy 111 , pp. 849-860. 10.1016/j.renene.2017.05.010

Ahmed, Zinah, Prickett, Paul and Grosvenor, Roger 2017. Assessing uneven milling cutting tool wear using component measurement. Presented at: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Preston and Grange-Over-Sands, UK, 10-13 July 2017. 30th International Conference on Condition Monitoring and Diagnostic Engineering Management. pp. 262-269.

Morrison, Euan, O'Doherty, Timothy, Prickett, Paul, Mason-Jones, Allan, Grosvenor, Roger, Byrne, Carlton and O'Doherty, Daphne 2017. Loadings on a tidal turbine during installation using CFD modelling. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC), Cork, Ireland, 27 August - 1 September 2017.

Allmark, Matthew, Prickett, Paul and Grosvenor, Roger 2017. Detection of tidal stream turbine rotor imbalance faults for turbulent flow conditions and optimal tip speed ratio control. Presented at: 12th European Wave and Tidal Energy Conference (EWTEC), Cork, Ireland, 27 August - 1 September 2017.

O'Regan, Paul, Prickett, Paul, Setchi, Rossitza, Hankins, Gareth and Jones, Nick 2017. Engineering a more sustainable manufacturing process for metal Additive Layer Manufacturing using a productive process pyramid. Presented at: Sustainable Design and Manufacturing (SDM-17), Bologna, Italy, 26-29 April 2017. Published in: Campana, G., Howlett, R. J., Setchi, Rossitza and Cimatti, B. eds. Sustainable Design and Manufacturing (SDM-17). Springer, pp. 736-745. 10.1007/978-3-319-57078-5_69

Alghamdi, Awn, Prickett, Paul and Setchi, Rossitza 2017. A conceptual framework to support decision-making in remanufacturing engineering processes. In: Campana, G., Howlett, R., Setchi, R. and Cimatti, B. eds. Sustainable Design and Manufacturing 2017, Vol. 68. Smart Innovation, Systems and Technologies, Springer International Publishing, pp. 222-232. (10.1007/978-3-319-57078-5_22)

Grosvenor, Roger, Prickett, Paul and He, Jianhao 2017. An assessment of structure-based sensors in the condition monitoring of tidal stream turbines. Presented at: 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco, 11-13 April 2017. 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER). IEEE, 10.1109/EVER.2017.7935942

Ahmed, Zinah J., Prickett, Paul william and Grosvenor, Roger Ivor 2016. The difficulties of the assessment of tool life in CNC milling. Presented at: The International Conference for Students on Applied Engineering, Newcastle, United Kingdom, 20-21 October 2016. Published in: Al-Shibaany, Z. Y. A. and Hameed, A. F. eds. 2016 International Conference for Students on Applied Engineering (ICSAE) Proceedings. Piscataway, NJ: IEEE, pp. 452-457. 10.1109/ICSAE.2016.7810234

O'Regan, Paul, Prickett, Paul and Setchi, Rossitza 2016. Metal based additive layer manufacturing: variations, correlations and process control. Presented at: KES-2016, York, 5 - 7 September 2016. Proceedings of the 20th International Conference KES-2016. Procedia Computer Science , vol. 96. Elsevier, pp. 216-224. 10.1016/j.procs.2016.08.134

Tatum, Sarah, Frost, Carwyn, Allmark, Matthew, O'Doherty, Daphne, Mason-Jones, Allan, Prickett, Paul, Grosvenor, Roger, Byrne, Carlton and O'Doherty, Timothy 2016. Wave-current interaction effects on tidal stream turbine performance and loading characteristics. International Journal of Marine Energy 14 , pp. 161-179. 10.1016/j.ijome.2015.09.002

Romli, Awanis, Prickett, Paul William, Setchi, Rossitza and Soe, Shwe 2016. An itegrated eco-design decision making tool. Presented at: Sustainable Design and Manufacturing 2016, Chania, Crete, Greece, 5 - 8 April 2016. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol. 52. Switzerland: Springer International Publishing, pp. 537-548. 10.1007/978-3-319-32098-4

Romli, Awanis, Prickett, Paul, Setchi, Rossitza and Soe, Shwe 2016. An integrated eco-design decision making tool. Sustainable Design and Manufacturing 2016 52 , pp. 537-548. 10.1007/978-3-319-32098-4_46

Morris, Ashley, Setchi, Rossitza and Prickett, Paul William 2016. Product change management and future information architectures. Presented at: Sustainable Design and Manufacturing 2016, Chania, Crete, Greece, 5 - 8 April 2016.. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol. 52. Switzerland: Springer International Publishing, pp. 241-250. 10.1007/978-3-319-32098-4_21

Morris, Ashley, Halpern, Marc, Setchi, Rossitza and Prickett, Paul William 2016. Assessing the challenges of managing product design change through-life. Journal of Engineering Design 27 (1 - 3) , pp. 25-49. 10.1080/09544828.2015.1085498

O'Regan, Paul, Prickett, Paul, Setchi, Rossitza, Hankins, G. and Jones, N. 2016. Metal Based Additive Layer Manufacturing: Variations, Correlations and Process Control. Procedia Computer Science 96 , pp. 216-224. 10.1016/j.procs.2016.08.134

Allmark, Matthew James, Prickett, Paul William, Frost, Carwyn and Grosvenor, Roger Ivor 2015. Tidal Steam Turbine blade fault diagnosis using time-frequency analyses. Presented at: Eleventh European Wave and Tidal Energy Conference EWTEC2015, Nantes, France, 6-11 Sptember 2015. pp. 1-10.

Short, Jamie, Prickett, Paul William and Grosvenor, Roger Ivor 2015. Development and application of a process diagnostic system for the desulphurisation process. Presented at: 6th International Congress on the Science and Technology of Steelmaking (ICS2015), Beijing, China, 12-14 May 2015.

O'Leary, Richard, Setchi, Rossitza and Prickett, Paul William 2015. An investigation into the recycling of Ti-6Al-4V powder used within SLM to improve sustainability. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Prickett, Paul William, Morris, Ashley and Setchi, Rossitza 2015. Product change management: the through-life impact of diverging designs within product fleets. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Romli, Awanis, Setchi, Rossitza, Soe, Shwe and Prickett, Paul 2015. Eco-case based reasoning (Eco-CBR) for supporting sustainable product design. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Siddiqui, Raees Ahmed, Grosvenor, Roger Ivor and Prickett, Paul William 2015. dsPIC-based advanced data acquisition system for Monitoring, Control and Security Applications. Presented at: 2015 12th International Bhurban Conference on Applied Sciences and Technology (IBCAST), Islamabad, Pakistan, 13-17 January 2015. 2015 12th International Bhurban Conference on Applied Sciences and Technology (IBCAST 2015). Institute of Electrical and Electronics Engineers (IEEE), pp. 293-299. 10.1109/IBCAST.2015.7058519

Romli, Awanis, Prickett, Paul, Setchi, Rossitza and Soe, Shwe 2015. Integrated eco-design decision-making for sustainable product development. International Journal of Production Research 53 (2) , pp. 549-571. 10.1080/00207543.2014.958593

Short, Jamie, Grosvenor, Roger Ivor and Prickett, Paul William 2014. The development of a process charge expert system for a Basic Oxygen Steelmaking plant. Presented at: 18th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Gdynia, Poland, 15-17 September 2014.

Grosvenor, Roger Ivor and Prickett, Paul William 2014. Fast and robust milling cutter tool breakage detection within a distributed microcontroller-based condition monitoring system. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Grosvenor, Roger Ivor and Prickett, Paul William 2014. The monitoring and validation of scale model tidal steam turbines. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Mukhtar, Nur Farah Hafizah, Brousseau, Emmanuel Bruno Jean Paul and Prickett, Paul William 2014. Study of silicon tip wear during AFM probe-based machining of single crystal copper. Presented at: Ninth International Conference on MicroManufacturing (ICOMM 2014), Nanyang Technological University (NTU) and National University of Singapore (NUS), Singapore, 25-28 March 2014.

Morris, Ashley, Halpern, Marc, Prickett, Paul William and Setchi, Rossitza M. 2014. Product change management: assessing the challenges to maintaining design integrity throughout the product lifecycle. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. Published in: Setchi, Rossitza M., Howlett, R. J., Naim, Mohamed Mohamed and Seinz, H. eds. KES Transactions on Sustainable Design and Manufacturing. Hove, East Sussex: Future Technology Press, pp. 188-200.

Owen, Robert J., Grosvenor, Roger Ivor, Porretta, S. and Prickett, Paul William 2014. A repairable mechanical system reliability assessment methodology applied in a steelmaking context. Quality and Reliability Engineering International 30 (7) , pp. 1093-1107. 10.1002/qre.1526

Romli, Awanis, Prickett, Paul William, Setchi, Rossitza and Soe, Shwe 2014. Sensitivity analysis of an eco-design house of quality model. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. pp. 488-499.

Grosvenor, Roger Ivor, Prickett, Paul William, Frost, Carwyn and Allmark, Matthew James 2014. Performance and condition monitoring of tidal stream turbines. Presented at: Second European Conference of the Prognostics and Health Management Society 2014, Nantes, France, 8-10 July 2014. Published in: Bregon, Anibal and Daigle, Matthew J. eds. European Conference of Prognostics and Health Management Society 2014. PHM Society, pp. 543-551.

Soroka, Anthony John, Bennett, Alastair, Prickett, Paul William and Higgins, Michael 2014. Industrial perceptions of manufacturing operations simulation. Presented at: Sustainable Design and Manufacturing 2014, Cardiff, UK, 28-30 April 2014.

Romli, Awanis, Prickett, Paul William, Setchi, Rossitza and Soe, Shwe 2013. A Conceptual Model for Sustainable Product Design. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Romli, Awanis, Prickett, Paul William, Setchi, Rossitza and Soe, Shwe 2013. A conceptual model for sustainable product design. Key Engineering Materials 572 , pp. 3-6. 10.4028/www.scientific.net/KEM.572.3

Prickett, Paul William and Aparicio Aikin, Ivan 2013. eTRIZ a portal for design creativity. Presented at: 5th International Conference on Intelligent Decision Technologies - KES IDT 2013, Sesimbra, Portugal, 26-28 June 2013.

Prickett, Paul William and Aparicio Aikin, Ivan 2013. eTRIZ a portal for design creativity. Frontiers in Artificial Intelligence and Applications 255 , 197 - 206. 10.3233/978-1-61499-264-6-197

Prickett, Paul William, Frankowiak, Marcos and Grosvenor, Roger Ivor 2012. Microcontroller-based process monitoring and management using embedded Petri-nets. Robotics and Computer-Integrated Manufacturing 28 (5) , pp. 602-612. 10.1016/j.rcim.2012.03.001

Mason-Jones, Allan, O'Doherty, Daphne Maria, Morris, Ceri E., O'Doherty, Timothy, Byrne, Carlton Barrie Baylis, Prickett, Paul William, Grosvenor, Roger Ivor, Owen, I., Tedds, S. and Poole, R. J. 2012. Non-dimensional scaling of tidal stream turbines. Energy 44 (1) , pp. 820-829. 10.1016/j.energy.2012.05.010

Prickett, Paul William and Aparicio Aikin, Ivan 2012. The development of a modified TRIZ Technical System ontology. Computers in Industry 63 (3) , pp. 252-264. 10.1016/j.compind.2012.01.006

Prickett, Paul William, Davies, Gwyndaf and Grosvenor, Roger Ivor 2012. The development of a knowledge-based electricity power station condenser management system. In: Graña, Manuel, Toro, Carlos, Posada, Jorge, Howlett, Robert J. and Jain, Lakhmi C. eds. Advances in Knowledge-Based and Intelligent Information and Engineering Systems, Frontiers in Artificial Intelligence and Applications, vol. 243. Amsterdam: IOS Press, pp. 1408-1417. (10.3233/978-1-61499-105-2-1408)

Prickett, Paul William, Siddiqui, Raees A. and Grosvenor, Roger Ivor 2011. A microcontroller-based end milling cutter monitoring and management system. International Journal of Advanced Manufacturing Technology 55 (9-12) , pp. 855-867. 10.1007/s00170-010-3135-z

Prickett, Paul William, Siddiqui, R. and Grosvenor, Roger Ivor 2011. The development of an end-milling process depth of cut monitoring system. International Journal of Advanced Manufacturing Technology 52 (1-4) , pp. 89-100. 10.1007/s00170-010-2711-6

Prickett, Paul William, Davies, Gwyndaf and Grosvenor, Roger Ivor 2011. A SCADA based Power Plant Monitoring and Management System. Lecture Notes in Computer Science 6883 (3) , pp. 433-442. 10.1007/978-3-642-23854-3_46

Byrne, Carlton Barrie Baylis, Grosvenor, Roger Ivor, Mason-Jones, Allan, Morris, Ceri E., O'Doherty, Daphne Maria, O'Doherty, Timothy and Prickett, Paul William 2011. Consideration of the condition based maintenance of marine tidal turbines. Presented at: 9th European Wave and Tidal Energy Conference (EWTEC), Southampton, UK, 5-9 September 2011.

Prickett, Paul William, Davies, Gwyndaf and Grosvenor, Roger Ivor 2011. Practical implementation of robust condition based backwash initiation using SCADA. Lecture Notes in Computer Science 6884 , pp. 425-434. 10.1007/978-3-642-23866-6_45

Grosvenor, Roger Ivor and Prickett, Paul William 2011. A discussion of the prognostics and health management aspects of embedded condition monitoring systems. Presented at: Annual Conference of the Prognostics and Health Management Society, Montreal, Canada, 25-29 September 2011. Published in: Celaya, J. R., Saha, S. and Saxena, A. eds. Proceedings Annual Conference of the Prognostics and Health Management Society 2011, Montreal, Canada. PHM Society, pp. 502-509.

Byrne, Carlton Barrie Baylis, Cherrett, W., Grosvenor, Roger Ivor, Mason-Jones, Allan, Morris, Ceri E., O'Doherty, Daphne Maria, O'Doherty, Timothy and Prickett, Paul William 2011. An investigation into the possible effects of cavitation on a horizontal axis tidal turbine. Presented at: 9th European Wave and Tidal Energy Conference 2011, Southampton, UK, 5- 9 Sep 2011. Proceedings of the 9th European Wave and Tidal Energy Conference, Southampton, UK, 5th-9th September 2011. Southampton: University of Southampton,

Mason-Jones, Allan, O'Doherty, Daphne Maria, Morris, Ceri E., O'Doherty, Timothy, Byrne, Carlton Barrie Baylis, Prickett, Paul, Grosvenor, Roger Ivor, Owen, I., Tebbs, S. and Poole, R. 2011. Scaling of a prototype tidal stream turbine using non-dimensional parameters. Presented at: 9th European Wave and Tidal Conference 2011, Southampton, UK, 5-9 September 2011. Proceedings of the 9th European Wave and Tidal Conference, Southampton, Uk, 5th-9th September 2011. Southampton: University of Southampton,

O'Doherty, Daphne Maria, Mason-Jones, Allan, Morris, Ceri E., O'Doherty, Timothy, Byrne, Carlton Barrie Baylis, Prickett, Paul William and Grosvenor, Roger Ivor 2011. Interaction of marine turbines in close proximity. Presented at: 9th European Wave and Tidal Conference 2011, Southampton, UK, 5-9 September 2011. Proceedings of the 9th European Wave and Tidal Conference, Southampton, UK, 5th-9th September 2011. Southampton: University of Southampton,

Alyami, M., Grosvenor, Roger Ivor and Prickett, Paul William 2010. A Microcontroller-based Approach to Monitoring Pneumatic Actuators. International Journal of Production Research 48 (11) , pp. 3193-3205. 10.1080/00207540902812102

Prickett, Paul William, Grosvenor, Roger Ivor and Alyami, M. 2010. Microcontroller-based monitoring of pneumatic systems. Presented at: 5th International Federation of Automatic control (IFAC) Symposium on Mechatronic Systems, Cambridge, USA, pp. 614-619. 10.3182/20100913-3-US-2015.00008

Siddiqui, Raees Ahmed, Grosvenor, Roger Ivor and Prickett, Paul William 2010. An overview of a microcontroller based approach to intelligent machine tool monitoring. Lecture Notes in Computer Science 6277 , pp. 371-380. 10.1007/978-3-642-15390-7_38

Siddiqui, Rameez Asif, Grosvenor, Roger Ivor and Prickett, Paul William 2010. An Overview of a Microcontroller based approach to Intelligent Machine Tool Monitoring. Presented at: 14th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems (KES 2010), Cardiff, UK, pp. 371-380.

Frankowiak, M. R., Grosvenor, Roger Ivor and Prickett, Paul William 2009. Microcontroller-Based process Monitoring using Petri-Nets. EURASIP Journal on Embedded Systems 2009 , 282708. 10.1155/2009/282708

Davies, G. R., Grosvenor, Roger I., Prickett, Paul William and Lee, C 2009. An approach to the detection and characterisation of faults in a water treatment plant. Presented at: COMADEM 2009, San Sebastian, Spain, 9-11 June 2009. Published in: Arnaiz, A., Aranzabe, A. and Rao, B .K. N. eds. COMADEM 2009, Condition Monitoring and Diagnostic Engineering Management (COMADEM), (San Sebastian, Spain). COMADEM International, pp. 553-558.

Owen, R. J., Porretta, S., Grosvenor, Roger Ivor and Prickett, Paul William 2009. Upgrading the Descaling System in a Hot Rolling Mill - A Practical Method for Quantifying the Descaling Systems Reliability. Presented at: 5th European Rolling Conference, The Institute of Materials, Minerals and Mining, London, UK,

Siddiqui, Rameez Asif, Grosvenor, Roger Ivor and Prickett, Paul William 2009. An embedded microcontroller-based milling process management system. Presented at: INDIN 2009, 7th IEEE International Conference on Industrial Informatics, Cardiff, UK, 23-26 June 2009. 7th IEEE International Conference in Industrial Informatics (INDIN 2009) 23-26 2009 June (Cardiff, UK). Piscataway, NJ, USA: IEEE, pp. 744-749.

Edwards, P. M., Grosvenor, Roger Ivor and Prickett, Paul William 2008. A Method for Detecting Incorrectly Evacuated Filament Lamps. Lightening Research and Technology 40 (2) , pp. 127-132. 10.1177/1477153507085113

Alyami, M., Siddiqui, R. A., Grosvenor, Roger Ivor and Prickett, Paul William 2008. A pressure based approach to the monitoring of a pneumatic parallel gripper using a dsPIC. Presented at: Proceedings of Congress and Exhibition Condition Monitoring and Diagnostic Engineering Management (COMADEM 2008), Prague, Czech Republic, pp. 33-42.

Siddiqui, Rameez Asif, Alyami, M., Grosvenor, Roger Ivor and Prickett, Paul William 2008. On-line measurement of process parameters for eMonitoring applications. Presented at: Proceedings of the 21th Diagnostic Engineering Management COMADEM, Prague, Czech Republic, pp. 435-444.

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2007. Machine tool condition monitoring using sweeping filter techniques. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 221 (1) , pp. 103-117. 10.1243/09596518JSCE133

Siddiqui, R. A., Amer, W., Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2007. Multi-band infinite impulse response filtering using microcontrollers for e-monitoring applications. Journal of Microprocessors and Microsystems 31 (6) , pp. 370-380. 10.1016/j.micpro.2007.02.007

Prickett, Paul William and Grosvenor, Roger Ivor 2007. A microcontroller-based milling process monitoring and management system. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture 221 (2) , pp. 357-362. 10.1243/09544054JEM556SC

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Sweeping filters and tooth rotation energy estimation (TREE) techniques for machine tool condition monitoring. International Journal of Machine Tools and Manufacture 46 (9) , pp. 1045-1052. 10.1016/j.ijmachtools.2005.07.031

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Distributed on-line system for process plant monitoring. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Engineering Manufacture 220 (2) , pp. 61-77. 10.1243/09544089JPME53

Edwards, P. M., Grosvenor, Roger Ivor and Prickett, Paul William 2006. A review of lamp condition monitoring technologies. Lighting Journal 71 (5) , pp. 31-38.

Ahsan, Q., Amer, W., Al-Yami, M., Grosvenor, Roger Ivor and Prickett, Paul William 2006. Distributed process monitoring and management. Presented at: Proceedings IEEE ICEIS, Islamabad, Pakistan, pp. 336-341.

Frankowiak, Marcos R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A Petri-net based distributed monitoring system using PIC microcontrollers. Microprocessors and Microsystems 29 (5) , pp. 189-196. 10.1016/j.micpro.2004.08.003

Frankowiak, Marcos R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A review of the evolution of microcontroller-based machine and process monitoring. International Journal of Machine Tools and Manufacture 45 (4-5) , pp. 573-582. 10.1016/j.ijmachtools.2004.08.018

Ahsan, Q., A., Siddiqui R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. An adaptable e-monitoring system for multi-loop processes. Presented at: Condition Monitoring and Diagnostic Engineering Management (COMADEM), Cranfield, UK, pp. 211-220.

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2005. A compact monitoring system for process valves. Presented at: 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania, Italy, pp. 1034-1046.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2005. Machine tool condition monitoring system using tooth rotation energy system (TREE) techniques. Presented at: 10th IEEE International Conference on Emerging Technologies and Factory Automation, Catania, Italy, pp. 529-536.

Siddiqui, Rameez Asif, Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2005. The role of emerging technologies in e-monitoring. Presented at: COMADEM International Conference on Condition Monitoring and Diagnostic Engineering Management, Cranfield, UK, pp. 263-271.

Eyers, D. R., Grosvenor, Roger Ivor and Prickett, Paul William 2005. Welding station condition monitoring using bluetooth enabled sensors and intelligent data management. Presented at: Sensors and Their Applications XIII, University of Greenwich at Medway, Kent, UK, 6–8 September 2005. Journal of Physics Conference Series , vol. 15. London: Institute of Physics Publishing, pp. 143-148. 10.1088/1742-6596/15/1/024

James, Mark, Grosvenor, Roger Ivor and Prickett, Paul William 2004. e-Distribution: internet-based management of a merchandiser supply chain. Supply Chain Management: An International Journal 9 (1) , pp. 7-15. 10.1108/13598540410517539

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Sweeping filter technique for frequency analysis. Presented at: Quality, Reliability, and Maintenance (QRM), Oxford, UK, PEP Ltd, pp. 185-189.

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Distributed control loop performance monitoring architecture. Presented at: Control 2004, Bath, UK, University of Bath,

Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. A reduced traffic software model for distributed monitoring systems. Presented at: The 17th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Cambridge, UK, pp. 204-213.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor and Prickett, Paul William 2004. Machine tool signal analysis using sweeping filter technique. Presented at: Quality, Reliability, and Maintenance (QRM 2004), Oxford, UK, PEP Ltd, pp. 189-193.

Amer, W., Grosvenor, Roger Ivor and Prickett, Paul William 2004. A distributed system based on sweeping filters for machine tool monitoring. Presented at: Congress & Exhibition on Condition Monitoring And Diagnostic Engineering Management (COMADEM 2004 International), Cambridge, UK, pp. 195-203.

Prickett, Paul William, Grosvenor, Roger Ivor and Jennings, Alun David 2003. E-monitoring: process monitoring using the internet. International Journal of COMADEM 6 (4) , pp. 9-17.

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor, Jennings, A. D., Prickett, Paul William and Frankowiak, M. R 2003. Design of a process and condition monitoring system using PIC based analogue data acquisition. Presented at: Condition Monitoring and Diagnostic Engineering Management (COMADEM), Vaxjo, Sweden, pp. 227-235.

Frankiowak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William and Jennings, D. 2003. Distributed monitoring system using pic microcontroller technologies. Presented at: ICOM 2003 International conference on Mechatronics, Loughborough, UK, 2003. Published in: Parkin, R. M., Al-Habaibeh, A. and Jackson, M. R. eds. ICOM 2003 - International Conference on Mechatronics Proceedings ICOM (Loughborough, UK). Wiley, pp. 415-420.

Grosvenor, Roger Ivor and Prickett, Paul William 2003. Intelligent process monitoring and management – time for a return to sensor-based methods. Presented at: Sensors and Their Applications XII, Limerick, Ireland, 2-4 September 2003. 12th Conference on Sensors and their Applications, Limerick , Ireland. IOP Publishing, pp. 497-502.

Pritchard, R., Jennings, A. D., Grosvenor, Roger Ivor and Prickett, Paul William 2003. Data acquisition for product testing and quality control. Presented at: International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2003), Vaxjo, Sweden, Vaxjo University Press, pp. 237-244.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor, Jennings, A. D. and Prickett, Paul William 2003. PIC micro-controller based machine tool monitoring system. Presented at: Congress and Exhibition on Condition Monitoring amd Diagnostic Engineering Managemen (COMADEM 2003), Vaxjo, Sweden, pp. 219-225.

Frankowiak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William and Jennings, A. D. 2002. A microcontroller based distributed monitoring system using a petri-net approach. Presented at: 15th International Congress on Condition Monitoring & Diagnostic Engineering Management (Conadem International), Birmingham, UK, 2-4 September 2002. Published in: Rao, R. K. N. and Nandi, A. K. eds. Condition monitoring and diagnostic engineering management : COMADEM : proceedings of the 15th international congress, 2nd-4th September 2002, Birmingham, UK. Comadem, pp. 37-44.

Grosvenor, Roger Ivor, Prickett, Paul William, Jennings, A. D. and Frankowiak, M. R 2002. Intelligent process monitoring and management. Presented at: The IEE Seminar on Control Loop Performance Assessment, London, UK, pp. 1-5.

Jennings, A. D., Prickett, Paul William, Grosvenor, Roger Ivor and Frankowiak, M. R 2002. Process and condition monitoring using the Internet (e-monitoring). Presented at: 15th International Congress on Condition Monitoring & Diagnostic Engineering Management (Conadem International), Birmingham, UK, pp. 45-52.

Prickett, Paul William and Johns, C 2001. The development of an on-line milling cutter tooth breakage detection system. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215 (2) , pp. 147-160. 10.1243/0954405011515244

Frankowiak, M. R., Grosvenor, Roger Ivor, Jennings, A. D., Prickett, Paul William and Turner, J. R. 2001. Technology advances and the current state of Petri net-based condition monitoring. Presented at: Sensors and Their Applications XI, London, UK, September 2001. Published in: Grattan, K. T. V. and Khan, S. H. eds. Sensors and Their Applications XI. Series in Sensors London, UK: Taylor and Francis, pp. 39-44.

Frankowiak, M. R., Grosvenor, Roger Ivor, Prickett, Paul William, Jennings, A. D. and Turner, J. R. 2001. Design of a PIC based data acquisition system for process and condition monitoring. Presented at: 14th International Congress Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), Manchester, UK, 4-6 September 2001. Published in: Starr, A. G. and Rao, B.K.N. eds. Condition monitoring and diagnostic engineering management (COMADEM 2001) : proceedings of the 14th international congress, 4-6 September 2001, Manchester, UK. Elsevier Science, pp. 481-488.

Jennings, A. D., Kennedy, V. R., Prickett, Paul William, Turner, J. R. and Grosvenor, Roger Ivor 2001. A distributed data processing system for process and condition monitoring. Presented at: 14th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Manchester, pp. 375-381.

Turner, J. R., Jennings, A. D., Prickett, Paul William and Grosvenor, Roger Ivor 2001. The design and implementation of a data acquisition and control system using fieldbus technologies. Presented at: 14th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), Manchester, UK, pp. 391-398.