ORCA
Online Research @ Cardiff

Clear Cookie - decide language by browser settings

Browse by Schools (by year)

Up a level

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Ö

Number of items: 538.

A

Abid, Rabia, Haddad, Abderrahmane

, Griffiths, Huw, Clark, David

, Cole, Matt and Evans, Simon 2013. Electrical characterization of aerospace graded carbon fiber reinforced plastic composites under low current DC and impulse energizations. Presented at: ICOLSE 2013 - International Conference on Lightning and Static Electricity, Seattle, WA, 18-20 September, 2013. Proceedings of the 2013 International Conference on Lightning and Static Electricity: ICOLSE,

Adeuyi, O. Daniel, Jenkins, N. and Wu, Jianzhong

2013. Topologies of the North Sea super grid. Presented at: UPEC 2013, Dublin, 2-5 September 2013. Power Engineering Conference (UPEC), 2013 48th International Universities'. Picastaway, NJ: IEEE, pp. 1-6. 10.1109/UPEC.2013.6714967

Adhikari, Dia, Hepburn, D. M. and Stewart, B. G. 2013. Analysis of deterioration of PET insulation with multiple voids due to electrical stressing. Presented at: IEEE Electrical Insulation Conference (EIC), Annapolis, MD, USA, 5-8 June 2011. Electrical Insulation Conference (EIC), 2011. IEEE, pp. 146-150. 10.1109/EIC.2011.5996135

Adhikari, Dia, Hepburn, D. M. and Stewart, B. G. 2013. PD characteristics and degradation in PET insulation with vented and unvented internal voids. Electric Power Systems Research 100 , pp. 65-72. 10.1016/j.epsr.2013.02.012

Agus, Setianto Samingan, Arifin, Yulian Firmana, Tripathy, Snehasis

and Schanz, Tom 2013. Swelling pressure-suction relationship of heavily compacted bentonite-sand mixtures. Acta Geotechnica 8 (2) , pp. 155-165. 10.1007/s11440-012-0189-0

Ahmed, Khalid Ibrahim 2013. Effect of gypsum on the hydro-mechanical characteristics of partially saturated sandy soil. PhD Thesis, Cardiff University.
Item availability restricted.

Ahmed, Nuredin Ali Salem, Emhemmed, A. and Elgaid, Khaled

2013. Dual-radios hypermesh network based on CSMA protocol. Presented at: 2013 International Conference on Information Networking (ICOIN), Bangkok, Thailand, 28-30 January 2013. 10.1109/ICOIN.2013.6496376

Al-Moadhen, Ahmed, Qiu, Renxi, Packianather, Michael, Ji, Ze

and Setchi, Rossitza

2013. Integrating robot task planner with common-sense knowledge base to improve the efficiency of planning. Procedia Computer Science 22 , pp. 211-220. 10.1016/j.procs.2013.09.097

Al-Moadhen, Ahmed, Qiu, Renxi, Packianather, P., Ji, Z. and Setchi, Rossitza

2013. Integrating robot task planner with common-sense knowledge base to improve the efficiency of planning. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: General Track Proceedings. pp. 94-103.

Alaei, P., Spezi, Emiliano

, Ehler, E. and Dusenbery, K. 2013. Assessing and minimizing the dose From KV cone beam CT to pediatric patients undergoing radiation therapy. Medical Physics 40 (6) , 151. 10.1118/1.4814220

Aldoumani, Anoor, Tasker, Paul J.

, Saini, R. S., Bell, James J.

, Williams, T. and Lees, Jonathan

2013. Operation and calibration of VNA-based large signal RF I-V waveform measurements system without using a harmonic phase reference standard. Presented at: ARFTG Microwave Measurement Conference (ARFTG), Seattle, WA, 7-7 June 2013. 2013 81st ARFTG Microwave Measurement Conference (ARFTG). Picastaway, NJ: IEEE, pp. 1-4. 10.1109/ARFTG.2013.6579055

Alkalbani, Saeed, Rezgui, Yacine

, Vorakulpipat, Chales and Wilson, Ian Eric 2013. ICT adoption and diffusion in the construction industry of a developing economy: The case of the sultanate of Oman. Architectural Engineering and Design Management 9 (1) , pp. 62-75. 10.1080/17452007.2012.718861

Alqahtany, Ali Muflah, Rezgui, Yacine

and Li, Haijiang

2013. A proposed model for sustainable urban planning development for environmentally friendly communities. Architectural Engineering and Design Management 9 (3) , pp. 176-194. 10.1080/17452007.2012.738042

Alshehri, Saud, Rezgui, Yacine

and Li, Haijiang

2013. Community resilience factors to disaster in Saudi Arabia: The case of Makkah Province. Brebbla, C. A., ed. Disaster Management and Human Health Risk III: Reducing Risk, Improving Outcomes, WIT Transactions on the Built Environment, vol. 133. Southampton: WIT Press, pp. 359-368. (10.2495/DMAN130321)

Alyami, Saleh H., Rezgui, Yacine

and Kwan, Alan Shu Khen

2013. Developing sustainable building assessment scheme for Saudi Arabia: Delphi consultation approach. Renewable and Sustainable Energy Reviews 27 , pp. 43-54. 10.1016/j.rser.2013.06.011

Amezquita-Brooks, Luis A., Ugalde Loo, Carlos Ernesto

, Liceaga-Castro, Eduardo and Liceaga-Castro, Jesus 2013. The multivariable structure function as an extension of the RGA matrix: relationship and advantages. Cybernetics and Physics 2 (2) , pp. 53-62.

Amezquita-Brooks, Luis Antonio, Ugalde Loo, Carlos Ernesto

, Liceaga-Castro, Eduardo and Liceaga-Castro, Jesus 2013. The evolution of the relative gain array matrix: the multivariable structure function. Presented at: 6th International Scientific Conference on Physics and Control (PhysCon'13), San Luis Potosi, Mexico, 26-29 August 2013.

Andreakou, Peristera, Brossard, Mael, Li, Chunyong, Bernechea, Maria

, Konstantatos, Gerasimos and Lagoudakis, Pavlos G. 2013. Size- and temperature-dependent carrier dynamics in oleic acid capped PbS quantum dots. Journal of Physical Chemistry C 117 (4) , pp. 1887-1892. 10.1021/jp3054108

Angeloudis, Athanasios

, Stoesser, Thorsten

, Kim, D. and Falconer, Roger Alexander

2013. CFD study of flow and transport characteristics in baffled disinfection tanks. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013. Proceedings of 35th IAHR World Congress, Chengdu, China, IAHR. 3.1, A11417,.

Anyebe, E. A.

and Zhuang, Q. 2013. Heteroepitaxial growth of free?standing InAs nanowires on graphite for flexible devices. Presented at: 22nd European Workshop on Heterostructure Technology (HETECH), University of Glasgow, Scotland, 9 - 11 September 2013.

Aref, Ibrahim and Elgaid, Khaled

2013. System level modeling of a digital communication channel based on SystemC. International Journal of Future Computer and Communication 2 (3) , pp. 210-214. 10.7763/IJFCC.2013.V2.154

Armstrong, Helen Sian

2013. Data fusion of relative movement in fast, repetitive-action sports using body wireless area networks. PhD Thesis, Cardiff University.
Item availability restricted.

Ashby, Shane P., Garcia Canadas, Jorge, Min, Gao

and Chao, Yimin 2013. Measurement of thermoelectric properties of phenylacetylene-capped silicon nanoparticles and their potential in fabrication of thermoelectric materials. Journal of Electronic Materials 42 (7) , pp. 1495-1498. 10.1007/s11664-012-2297-x

Ayre, Wayne Nishio

2013. Novel approaches to the development of PMMA bone cement. PhD Thesis, Cardiff University.
Item availability restricted.

Azimi, R., Alaei, P., Takahashi, Y., Spezi, Emiliano

, Yagi, M., Arentsen, L., Sharkey, L., Seelig, D., Schappa, J. and Hui, S. 2013. Dosimetric and biological benchmarking of a murine total marrow irradiation platform. Medical Physics 40 (6)

Azzopardi, Carl, Hicks, Yulia Alexandrovna

and Camilleri, Kenneth P. 2013. Exploiting gastrointestinal anatomy for organ classification in capsule endoscopy using locality preserving projections. Presented at: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Osaka, Japan, 3-7 July 2013. Published in: Sunagawa, K. and Roux, C. eds. Proceedings of the 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Los Alamitos, CA: IEEE, pp. 3654-3657. 10.1109/EMBC.2013.6610335

B

Bagdanavicius, Audrius, Bowen, Philip John

, Syred, Nicholas and Crayford, Andrew Philip

2013. Turbulent Flame Structure of Methane-Hydrogen Mixtures at Elevated Temperature and Pressure. Combustion Science and Technology 185 (2) , pp. 350-361. 10.1080/00102202.2012.718005

Bagdanavicius, Audrius and Jenkins, Nicholas

2013. Power requirements of ground source heat pumps in a residential area. Applied Energy 102 , pp. 591-300. 10.1016/j.apenergy.2012.08.036

Bai, YuGuang, Yang, Kai, Sun, DongKe, Zhang, YuGuang, Kennedy, David

, Williams, Fred and Gao, XiaoWei 2013. Numerical aerodynamic analysis of bluff bodies at a high Reynolds number with three-dimensional CFD modeling. Science China Physics, Mechanics and Astronomy 56 (2) , pp. 277-289. 10.1007/s11433-012-4982-4

Bai, Jing, Fang, Hongwei and Stoesser, Thorsten

2013. Transport and deposition of fine sediment in open channels with different aspect ratios. Earth Surface Processes and Landforms 38 (6) , pp. 591-600. 10.1002/esp.3304

Balazs, Gyorgy L., Bisch, Philippe, Borosnyói, Adorján, Burdet, Olivier, Burns, Clare, Ceroni, Francesca, Cervenka, Vladimir, Chiorino, Mario A., Debernardi, Piergiorgio, Eckfeldt, Lars, El-Badry, Mamdouh, Fehling, Ekkehard, Foster, Stephen J., Ghali, Amin, Gribniak, Viktor, Guiglia, Matteo, Kaklauskas, Gintaris, Lark, Robert John

, Lenkei, Peter, Lorrain, Michel, Marí, Antonio, Ozbolt, Josko, Pecce, Marisa, Pérez Caldentey, Alejandro, Taliano, Maurizio, Tkalcic, Damir, Torrenti, Jean Michel, Torres, Luis, Toutlemonde, Francois, Ueda, Tamon, Vite, Jan L. and Vráblík, Lukáš 2013. Design for SLS according to fib Model Code 2010. Structural Concrete 14 (2) , pp. 99-123. 10.1002/suco.201200060

Balehosur, Manjunath 2013. Prediction of no-load losses of stacked 3-phase, 3-limb transformer cores. PhD Thesis, Cardiff University.
Item availability restricted.

Banitalebi Dehkordi, M.

, Frisoli, A., Sotgiu, E. and Bergamasco, M. 2013. A new algorithm for gravity compensation of a 3-UPU parallel manipulator. Presented at: 19th CISM-IFToMM RoManSy Symposium (ROMANSY2012), Paris, France, 12-14 June 2012. Published in: Padois, Vincent, Bidaud, Philippe and Khatib, Oussama eds. Romansy 19 – Robot Design, Dynamics and Control: Proceedings of the 19th CISM-Iftomm Symposium. CISM International Centre for Mechanical Sciences. CISM International Centre for Mechanical Sciences Springer, Vienna, pp. 117-124. 10.1007/978-3-7091-1379-0_15

Baranya, Sándor, Olsen, Nils Reidar B., Stoesser, Thorsten

and Sturm, Terry W. 2013. A nested grid based computational fluid dynamics model to predict bridge pier scour. Proceedings of the ICE - Water Management 167 (5) , pp. 259-268. 10.1680/wama.12.00104

Bartlett, Paul Andrew, Lea, Simon C., Meydan, Turgut

, Williams, Paul Ieuan

, Landini, Gabriel, Walmsley, A. and Moses, Anthony John 2013. Generated vibration modes in ultrasonic scaler transducer components. Sensor Letters 11 (1) , pp. 66-68. 10.1166/sl.2013.2796

Beach, Thomas Henry

, Kasim, Tala, Li, Haijiang

, Nisbet, Nicholas and Rezgui, Yacine

2013. Towards automated compliance checking in the construction industry. Presented at: DEXA 2013: International Conference on Database and Expert Systems Applications, Prague, Czech Republic, 26-29 August 2013. Published in: Decker, Hendrik, Lhotska, Lenka, Link, Sebastian, Basl, Josef and Tjoa, A. Min eds. Database and Expert Systems Applications: 24th International Conference, DEXA 2013, Prague, Czech Republic, August 26-29, 2013. Proceedings, Part I. Lecture Notes in Computer Science. , vol.8055 Springer, pp. 366-380. 10.1007/978-3-642-40285-2_32

Beach, Thomas

, Rana, Omer Farooq

and Avis, Nicholas John 2013. Integrating acceleration devices using CometCloud. Presented at: 1st ACM workshop on Optimization techniques for resources management in clouds, New York, NY, USA, 17-21 June 2013. Published in: Baraglia, R., Coppola, M. and Dazzi, P. eds. ORMaCloud '13: Proceedings of the first ACM workshop on Optimization techniques for resources management in clouds. New York, NY: ACM, pp. 17-24. 10.1145/2465823.2465824

Beach, Thomas

, Rana, Omer Farooq

, Rezgui, Yacine

and Parashar, Manish 2013. Cloud Computing for the Architecture, Engineering & Construction Sector: Requirements, Prototype & Experience. Journal of Cloud Computing: Advances, Systems and Applications 2 (4) , 8. 10.1186/2192-113X-2-8

Beex, Lars

, Verberne, C. W. and Peerlings, R. H. J. 2013. Experimental identification of a lattice model for woven fabrics: Application to electronic textile. Composites Part A: Applied Science and Manufacturing 48 , pp. 82-92. 10.1016/j.compositesa.2012.12.014

Bennasar, Mohamed, Setchi, Rossitza

, Bayer, Antony James

and Hicks, Yulia Alexandrovna

2013. Feature selection based on information theory in the clock drawing test. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. Procedia Computer Science. , vol.22 pp. 902-911. 10.1016/j.procs.2013.09.173

Bennasar, Mohamed, Setchi, Rossitza

and Hicks, Yulia Alexandrovna

2013. Feature interaction maximisation. Pattern Recognition Letters 34 (14) , pp. 1630-1635. 10.1016/j.patrec.2013.04.002

Bennett, Daniel, Cuss, Robert, Vardon, Philip, Harrington, Jon, Sedighi, Majid, Shaw, Richard and Thomas, Hywel

2013. 'Second Order' exploratory data analysis of the large scale gas injection test (Lasgit) dataset, focused around known gas migration events. Presented at: Gas Generation and Migration International Symposium and Workshop, Luxembourg, 5-7 February 2013.

Berinskii, Igor E. and Borodich, Feodor M.

2013. On the isotropic elastic properties of graphene crystal lattice. Surface Effects in Solid Mechanics 30 , pp. 33-42. 10.1007/978-3-642-35783-1_3

Berinskii, Igor and Borodich, Feodor M.

2013. Elastic in-plane properties of 2D linearized models of graphene. Mechanics of Materials 62 , pp. 60-68. 10.1016/j.mechmat.2013.03.004

Berthon, B., Marshall, C., Evans, M., Edwards, A. and Spezi, Emiliano

2013. Performance of 18F-FDG PET automated segmentation methods for non-spherical objects. European Journal of Nuclear Medicine and Molecular Imaging 40 , S236-S237.

Berthon, Beatrice, Holmes, R. B., Marshall, C., Jayaprakasam, V. S., Evans, M. and Spezi, Emiliano

2013. Evaluation of several automatic PET-segmentation algorithms for radiotherapy treatment planning in H&N using a printed sub-resolution sandwich phantom. European Journal of Nuclear Medicine and Molecular Imaging 40 , S236-S236.

Berthon, Beatrice, Marshall, C., Evans, M. and Spezi, Emiliano

2013. Implementation and optimization of automatic 18F-FDG PET segmentation methods. European Journal of Nuclear Medicine and Molecular Imaging 40 , S299-S299.

Berthon, Beatrice, Marshall, Christopher

, Edwards, A., Evans, M. and Spezi, Emiliano

2013. Influence of cold walls on PET image quantification and volume segmentation: A phantom study. Medical Physics 40 (8) , 082505. 10.1118/1.4813302

Bhaduri, Debajyoti

, Soo, S.L., Novovic, D., Aspinwall, D.K., Harden, P., Waterhouse, C., Bohr, S., Mathieson, A. and Lucas, M. 2013. Ultrasonic assisted creep feed grinding of Inconel 718. Procedia CIRP 6 , pp. 616-621. 10.1016/j.procir.2013.03.044

Biggs, Paul

, Evans, Samuel, Jones, Michael David

and Theobald, Peter

2013. Development of a methodology for the standardisation and improvement of 'Smartphone' photography of patterned bruises and other cutaneous injuries. Science & Justice 53 (3) , pp. 358-362. 10.1016/j.scijus.2013.05.001

Bigoni, D., Carini, A., Gei, Massimiliano

and Salvadori, A. 2013. Special issue: fracture phenomena in nature and technology[foreword]. International Journal of Fracture 184 (1-2) , p. 1.

Bigot, Samuel

, Pernot, Jean-Philippe, Surleraux, Anthony and Elkaseer, Ahmed 2013. Micro-EDM numerical simulation and experimental Validation. Presented at: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcárate, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Singapore, China: Research Publishing, 10.3850/978-981-07-7247-5_414

Bomminayuni, Sandeep Kumar, Stoesser, Thorsten

and Olsen, Nils Reidar Boe 2013. Evaluation of low Reynolds number turbulence models for an open-channel flow over a rough bed using LES data. Journal of Hydraulic Engineering 139 (6) , pp. 664-668. 10.1061/(ASCE)HY.1943-7900.0000708

Borodich, Feodor M.

2013. Fractal contact mechanics. Wang, Jane and Chung, Yip Wah, eds. Encyclopedia of Tribology, Springer, pp. 1249-1258.

Borodich, Feodor M.

2013. Fractal geometry. Wang, Jane and Chung, Yip Wah, eds. Encyclopedia of Tribology, Springer, pp. 1258-1264.

Borodich, Feodor M.

2013. Fractal nature of surfaces. Wang, Jane and Chung, Yip Weh, eds. Encyclopedia of Tribology, Springer, pp. 1264-1269.

Borodich, Feodor M.

2013. Physical and chemical processes affecting performance of super-low friction carbon nitride coatings in various gaseous environments. Presented at: World Tribology Congress 2013 (WTC 2013), Torino, Italy, 8-13 Seotember 2013.

Borodich, Feodor M.

and Evans, Henry Peredur

2013. Fractal characterization of surfaces. Wang, Jane and Chung, Yip Wah, eds. Encyclopedia of Tribology, Springer, n/a.

Borodich, Feodor M.

, Galanov, Boris A., Gorb, Stanislav N., Prostov, Mikhail Y., Prostov, Yuriy I. and Suarez-Alvarez, Maria M. 2013. Evaluation of adhesive and elastic properties of polymers by the BG method. Macromolecular Reaction Engineering 7 (10) , pp. 555-563. 10.1002/mren.201300107

Borodich, Feodor M.

, Galanov, Boris A., Keer, Leon M. and Suarez-Alvarez, Maria 2013. Adhesive contact of transversally-isotropic and prestressed elastic solids. Presented at: World Tribology Congress 2013 (WTC 2013), Torino, Italy, 8-13 September 2013.

Borrell, Amparo, Salvador, María Dolores, Garcia Rocha, Victoria

, Fernández, Adolfo, Molina, Tamara and Moreno, Rodrigo 2013. Enhanced properties of alumina-aluminium titanate composites obtained by spark plasma reaction-sintering of slip cast green bodies. Composites: Part B Engineering 47 , pp. 255-259. 10.1016/j.compositesb.2012.11.010

Borrell, Amparo, Salvador, María Dolores, Garcia Rocha, Victoria

, Fernández, Adolfo, Molina, Tamara and Moreno, Rodrigo 2013. EPD and spark plasma sintering of bimodal alumina/titania concentrated suspensions. Journal of Alloys and Compounds 577 , pp. 195-202. 10.1016/j.jallcom.2013.04.175

Borthwick, Alistair, Carpenter, John, Wicks, Jon, Clarke, Barry and Falconer, Roger Alexander

2013. The importance of understanding computer analyses in civil engineering. Proceedings of the ICE - Civil Engineering 166 (3) , pp. 137-143. 10.1680/cien.12.00038

Bowker, Michael

, Crouch, Jonathan James, Carley, Albert Frederick, Davies, Philip Rosser

, Morgan, David John

, Lalev, Georgi, Dimov, Stefan Simeonov and Pham, Duc Truong 2013. Encapsulation of Au nanoparticles on a silicon wafer during thermal oxidation. Journal of Physical Chemistry C 117 (41) , pp. 21577-21582. 10.1021/jp4074043

Boye, Brian A., Falconer, Roger Alexander

and Akande, K. 2013. Integrated water management solutions from cloud to coast: application to Ribble Basin. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013. pp. 2535-2540.

Bragov, A. M., Karihaloo, Bhushan Lal

, Petrov, Y. V., Konstantinov, A. Y., Lamzin, D. A., Lomunov, A. K. and Smirnov, I. V. 2013. Experimental - theoretical investigation of fiber reinforced concrete under dynamic loading. Presented at: FIB Symposium 2013, Tel Aviiv, Israel, 22-24 April 2013.

Bragov, A. M., Petrov, Yu. V., Karihaloo, Bhushan Lal

, Konstantinov, A. Yu., Lamzin, D. A., Lomunov, A. K. and Smirnov, I. V. 2013. Dynamic strengths and toughness of an ultra high performance fibre reinforced concrete. Engineering Fracture Mechanics 110 , pp. 477-488. 10.1016/j.engfracmech.2012.12.019

Braini, Shuaib 2013. Coatings for outdoor high voltage insulators. PhD Thesis, Cardiff University.
Item availability restricted.

Brammer, James, Falconer, Roger Alexander

and Ellis, C. 2013. Physical and numerical modelling of the Severn Barrage. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Brammer, James, Falconer, Roger Alexander

and Kwan, Alan Shu Khen

2013. Physical and numerical modelling of the wake characteristics of the Savonius tidal stream turbine. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Brigstocke, Gavin Huw, Hearden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2013. The functional range of movement of the human wrist. Presented at: British Orthopaedic Association Annual Congress, Birmingham, UK, 1-4 October 2013.

Brigstocke, Gavin Huw, Hearden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2013. In-vivo confirmation of the use of the dart thrower's motion during activities of daily living. Presented at: British Orthopaedic Association Annual Congress, Birmingham, UK, 1-4 October 2013.

Brigstocke, Gavin Huw, Hearnden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2013. The functional range of movement of the human wrist. Presented at: XVIIIth Federation of European Societies for Surgery of the Hand Congress, Belek-Antalya, Turkey, 29 May-1 June 2013.

Brigstocke, Gavin Huw, Hearnden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2013. The functional range of movement of the human wrist. Journal of Hand Surgery: European Volume 38 (5) , pp. 554-556. 10.1177/1753193412458751

Brigstocke, Gavin Huw, Hearnden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2013. In-vivo confirmation of the functional significance of the dart thrower's motion of the human wrist. Presented at: XVIIIth Federation of European Societies for Surgery of the Hand (FESSH) Congress, Belek-Antalya, Turkey, 29 May-1 June 2013.

Britton, Andrew, Setchi, Rossitza

and Marsh, A. 2013. Intuitive interaction with multifunctional mobile interfaces. Journal of King Saud University - Computer and Information Sciences 25 (2) , pp. 187-196. 10.1016/j.jksuci.2012.11.002

Brousseau, Emmanuel Bruno Jean Paul

, Arnal, Benoit, Thiery, Stephane, Nyiri, Eric, Gibaru, Olivier and Mayor, J. Rhett 2013. Towards CNC automation in AFM probe-based nano machining. Presented at: 8th International Conference on Manufacturing (ICOMM 2012), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM 2013). 8th International Conference on MicroManufacturing (ICOMM2013). International Conference on MicroManufacturing, pp. 499-506.

Brownsword, M. and Setchi, Rossitza

2013. Formalised approach to the management of risk: Process formalisation. Yang, Guangfei, ed. Multidisciplinary Studies in Knowledge and Systems Science, IGI Global, 214 -232.

Bruni, Stefano, Carboni, Michele, Crivelli, Davide

, Guagliano, Mario and Rolek, Pawel 2013. A preliminary analysis about the application of acoustic emission and low frequency vibration methods to the structural health monitoring of railway axles. Presented at: 4th IEEE Conference on Prognostics and System Health Management (PHM, Milan, Italy, 8-11 Sept 2013. 2013 Prognostics And Health Management Conference (PHM). 2013 PROGNOSTICS AND HEALTH MANAGEMENT CONFERENCE (PHM). Chemical Engineering Transactions , vol.33 IEEE, pp. 697-702. 10.3303/CET1333117

Bryant, Michael James 2013. Running-in and residual stress: finite element contact analysis of as measured rough surfaces and comparison with experiment. PhD Thesis, Cardiff University.
Item availability restricted.

Bryant, C., Pugh, Neil

, Coleman, Declan, Morris, Rhys J.

, Williams, P. T. and Humphries, Keith 2013. Comparison of Doppler ultrasound velocity parameters in the determination of internal carotid artery stenosis. Ultrasound 21 (3) , pp. 124-131. 10.1177/1742271X13496680

Butler-Smith, P, Axinte, D. A., Pacella, Manuela

and Fay, M. W. 2013. Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures. Journal of Materials Processing Technology 213 (2) , pp. 194-200. 10.1016/j.jmatprotec.2012.08.010

C

Camarchia, V., Fang, Jie, Ghione, G., Khoshkholgh, A. Javan, Moreno Rubio, J.

, Pirola, M., Quaglia, R.

and Ramella, C. 2013. Bandwidth extension of GaN Doherty power amplifier: Effect on power, efficiency and linearity. Presented at: 2013 IEEE International Wireless Symposium (IWS), Beijing, China, 14-18 April 2013. 2013 IEEE International Wireless Symposium (IWS). IEEE, pp. 1-4. 10.1109/IEEE-IWS.2013.6616789

Camarchia, Vittorio, Fang, Jie, Moreno Rubio, Jorge

, Pirola, Marco and Quaglia, Roberto

2013. 7 GHz MMIC GaN Doherty Power Amplifier with 47% efficiency at 7 dB output back-off. IEEE Microwave and Wireless Components Letters 23 (1) , pp. 34-36. 10.1109/LMWC.2012.2234090

Camarchia, Vittorio, Moreno Rubio, Jorge

, Pirola, Marco, Quaglia, Roberto

, Colantonio, Paolo, Giannini, Franco, Giofre, Rocco, Piazzon, Luca, Emanuelsson, Thomas and Wegeland, Tobias 2013. High-Efficiency 7 GHz Doherty GaN MMIC Power Amplifiers for mackhaul radio links. IEEE Transactions of Electron Devices 60 (10) , pp. 3592-3595. 10.1109/TED.2013.2274669

Canning, Timothy A. J., Tasker, Paul J.

and Cripps, Stephen Charles

2013. Load Pull verification of a novel Class B/J design tool: Second harmonic clipping contours. Presented at: 81 st ARFTG Microwave Measurement Conference, Seattle, WA, USA, 7 June 2013. Microwave Measurement Conference (ARFTG), 2013 81st ARFTG. IEEE, pp. 1-3. 10.1109/ARFTG.2013.6579040

Canning, Timothy A. J., Tasker, Paul J.

and Cripps, Stephen Charles

2013. Waveform evidence of gate harmonic short circuit benefits for high efficiency x-band power amplifiers. IEEE Microwave and Wireless Components Letters 23 (8) , pp. 439-441. 10.1109/LMWC.2013.2272317

Carboni, Michele, Bruni, Stefano, Crivelli, Davide

, Guagliano, Mario and Rolek, Pawel 2013. A study on the performance of acoustic emission and low frequency vibration methods to the real-time condition monitoring of railway axles. Presented at: 12th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, ICNDT 2013, Portorož, Slovenia, 4-6 September 2013. The 12th International Conference of the Slovenian Society for Non-Destructive Testing. Ljubljana: Slovenian Society for Non-Destructive Testing, pp. 559-566.

Carpi, Federico and Gei, Massimiliano

2013. Predictive stress-stretch models of elastomers up to the characteristic flex. Smart Materials and Structures 22 (10) , 104011. 10.1088/0964-1726/22/10/104011

Casbon, Michael A.

and Tasker, Paul J.

2013. Filter-less diplexer enables active harmonic load-pull at ka band. Presented at: 81st ARFTG Microwave Measurement Conference, Seattle, Washington, USA, 7 June 2013. Microwave Measurement Conference (ARFTG), 2013 81st ARFTG. 2013 81ST ARFTG MICROWAVE MEASUREMENT CONFERENCE (ARFTG). Picastaway: IEEE, pp. 1-4. 10.1109/ARFTG.2013.6579028

Casbon, Michael A.

, Tasker, Paul J.

, Wang, Wei-Chou, Lin, Che-Kai, Wang, Wen-Kai and Wohlmuth, W. 2013. Advanced RF IV waveform engineering tool for use in device technology optimization: RF pulsed fully active harmonic load pull with synchronized 3eV laser. Presented at: IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS), Monterey, CA, USA, 13-16 October 2013. Compound Semiconductor Integrated Circuit Symposium (CSICS), 2013 IEEE. IEEE, pp. 1-4. 10.1109/CSICS.2013.6659212

Cemesova, Alexandra

2013. Enhancing BIM-based data transfer to support the design of low energy buildings. PhD Thesis, Cardiff University.
Item availability restricted.

Centeno, A., Garcia Rocha, Victoria

, Alonso, B., Fernández, A., Gutierrez-Gonzalez, C.F., Torrecillas, R. and Zurutuza, A. 2013. Graphene for tough and electroconductive alumina ceramics. Journal of the European Ceramic Society 33 (15-16) , pp. 3201-3210. 10.1016/j.jeurceramsoc.2013.07.007

Chaudhary, M. A, Memon, Z. A., Lees, Jonathan

, Benedikt, Johannes

and Tasker, Paul J.

2013. Investigation of baseband electrical memory effects on the dynamic characteristics of power transistors. Presented at: 2013 16th International Multi Topic Conference (INMIC), Lahore, Pakistan, 19-20 December 2013. Multi Topic Conference (INMIC), 2013 16th International. IEEE, pp. 106-109. 10.1109/INMIC.2013.6731333

Chaudhary, Muhammad Akmal, Lees, Jonathan

, Benedikt, Johannes

and Tasker, Paul J.

2013. Reduction of baseband electrical memory effects using broadband active baseband load-pull. Presented at: 2013 IEEE International Wireless Symposium (IWS), Beijing, China, 14-18 April 2013. Wireless Symposium (IWS), 2013 IEEE International. IEEE, pp. 1-4. 10.1109/IEEE-IWS.2013.6616709

Chaudry, Modassar

, Wu, Jianzhong

and Jenkins, Nicholas

2013. A sequential Monte Carlo model of the combined GB gas and electricity network. Energy Policy 62 , pp. 473-483. 10.1016/j.enpol.2013.08.011

Chen, Hui 2013. A more realistic genetic algorithm. MPhil Thesis, Cardiff University.
Item availability restricted.

Cheng, Meng, Wu, Jianzhong

, Ekanayake, Janaka

and Jenkins, Nicholas

2013. Primary frequency response in the Great Britain power system from dynamically controlled refrigerators. Presented at: CIRED 2013, Stockholm, Sweden, 10-13 June 2013.

Chukwuchekwa, Nkwachukwu, Moses, Anthony John and Anderson, Philip Ian

2013. Effect of magnetic domain refinement on barkhausen noise of large grain high permeability oriented electrical steel. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Chukwuchekwa, Nkwachukwu, Moses, Anthony John and Anderson, Philip Ian

2013. Effects of strip thickness and silicon content on Magnetic Barkhausen Noise of non-oriented electrical steel at 50~Hz. International Journal of Applied Electromagnetics and Mechanics 39 (1-4) , pp. 541-545. 10.3233/JAE-2012-1508

Cifarelli, L., Andreakou, P., Brossard, M., Li, C., Lagoudakis, P. G., Bernechea, Maria

, Konstantatos, G., Wagner, F. and Wiersma, D.S. 2013. Spectroscopic evidence of resonance energy transfer mechanism from PbS QDs to bulk silicon. EPJ Web of Conferences 54 , 01017. 10.1051/epjconf/20135401017

Cifuentes, Hector and Karihaloo, Bhushan Lal

2013. Determination of size-independent specific fracture energy of normal- and high-strength self-compacting concrete from wedge splitting tests. Construction and Building Materials 48 , pp. 548-553. 10.1016/j.conbuildmat.2013.07.062

Clark, David

, Griffiths, Huw, Harid, Noureddine

, Haddad, Abderrahmane

and Guo, Dongsheng 2013. Wireless measurement system for a large-scale grounding electrode test facility. Presented at: 48th Power Engineering Conference (UPEC), Dublin, Ireland, 2-5 Sept 2013. Power Engineering Conference (UPEC), 2013 48th International Universities'. Picastaway, NJ: IEEE, pp. 1-4. 10.1109/UPEC.2013.6714998

Claus, Susanne

2013. Numerical simulation of complex viscoelastic flows using discontinuous galerkin spectral/hp element methods. PhD Thesis, Cardiff University.
Item availability restricted.

Cleall, Peter John

and Rees, Stephen William

2013. Analysis of inter-seasonal heat fluxes in soils. Presented at: ISES Solar World Congress 2013, Cancun, Mexico, 3-7 November 2013.

Cleall, Peter John

, Singh, Rao M. and Thomas, Hywel Rhys

2013. Vapour transfer in unsaturated compacted bentonite. Géotechnique 63 (11) , pp. 957-964. 10.1680/geot.12.P.147

Colombo, Chiara, Crivelli, Davide

, Gobbi, Giorgia, Guagliano, Mario and Vergani, Laura 2013. Application of thermography and acoustic emission to detect impact damage in CFRP. Presented at: 3rd International Conference of Engineering Against Failure (ICEAF III), Kos, Greece, 26-28 June 2013. Proceedings of the 3rd International Conference of Engineering Against Failure.

Colombo, Chiara, Crivelli, Davide

, Gobbi, Giorgia, Guagliano, Mario and Vergani, Laura 2013. A comparison between acoustic emission and thermography on impact damage assessment of carbon fiber materials. Presented at: 9th International Conference on Advances in Experimental Mechanics, Cardiff, UK, 3-5 September 2013.

Coombs, W. M., Crouch, R. S. and Heaney, Claire 2013. Observations on Mohr-Coulomb plasticity under plane strain. Journal of Engineering Mechanics 139 (9) , pp. 1218-1228. 10.1061/(ASCE)EM.1943-7889.0000568

Courtecuisse, Hadrien, Kerfriden, Pierre

and Bordas, Stephane Pierre Alain

2013. Cutting in real time in corotational elasticity and perspectives on simulating cuts. Presented at: Computational Biomechanics for Medicine: Models, Algorithms and Implementation (Seventh Computational Biomechanics for Medicine Workshop), France, 29 March 2013. Published in: Wittek, Adam, Miller, Karol and Nielsen, Poul M. F. eds. Computational Biomechanics for Medicine. , vol.1 Springer, pp. 3-5. 10.1007/978-1-4614-6351-1_1

Craik, Jonathan D., Laffer, Caroline H. L., Richards, Simon W., Walsh, Sean P. and Evans, Samuel Lewin

2013. Distal humerus cortical strains following total elbow arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227 (2) , pp. 120-128. 10.1177/0954411912463321

Crivelli, Davide

, Guagliano, M., McCrory, John, Al-Jumaili, Safaa Khairry, Eaton, Mark Jonathan

, Pearson, Matthew Robert

, Holford, Karen Margaret

and Pullin, Rhys

2013. Classification of acoustic emission data from Buckling Test of carbon fiber panel using neural networks. Presented at: 3rd European Aeronautics Science Network Workshop on Aerostructures, Milan, Italy, 11 October 2013.

D

Davies, Alan, John, Elwyn Graham and Thomas, Andrew 2013. A flow direction weighting scheme for facility layout in cellular manufacturing. International Journal of Productivity and Performance Management 62 (2) , pp. 185-203. 10.1108/17410401311295731

Davies, Huw Charles

2013. Exploration of the Stiffness Profiles of Modern Cars in Pedestrian Impacts. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 227 (6) , pp. 812-821. 10.1177/0954407012465043

Davies, Huw Charles

2013. Formula student as part of a mechanical engineering curriculum. European Journal of Engineering Education 38 (5) , pp. 485-496. 10.1080/03043797.2013.811474

Davies, Huw Charles

2013. Integrating a multi-university design competition into a mechanical engineering design curriculum using modern design pedagogy. Journal of Engineering Design 24 (5) , pp. 383-396. 10.1080/09544828.2012.761679

Davies, Huw Charles

and Clarke, Alastair

2013. Design and manufacture of components for motor sport using computer-aided design and rapid casting technology. Proc IMechE Part C: Journal of Mechanical Engineering Science 227 (12) , pp. 2751-2761. 10.1177/0954406213479079

Davies, Huw Charles

and Clarke, Alastair

2013. Design and manufacture of components for motorsport using computer aided design and rapid casting technology. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227 (12) , pp. 2751-2761. 10.1177/0954406213479079

Davies, Huw Charles

and Datardina, Naeem 2013. A probabilistic model for 1st stage dimensioning of renewable hydrogen transport micro-economies. Renewable Energy 60 , pp. 355-362. 10.1016/j.renene.2013.05.029

Debnath, Kumar Biswajit and Ahmed, Khandaker Shabbir 2013. Maximizing daylight use potential in retail shopping environments in the context of Dhaka, Bangladesh. Presented at: AEI 2013: Building Solutions for Architectural Engineering, State College, Pennsylvania, United States, 3-5 April 2013. Published in: Anumba, Chimay J. and Memari, Ali M. eds. AEI 2013: Building Solutions for Architectural Engineering. pp. 765-775. 10.1061/9780784412909.075

Deeb, Rola 2013. Flow of self-compacting concrete. PhD Thesis, Cardiff University.
Item availability restricted.

Deeb, Rola and Karihaloo, Bhushan Lal

2013. Mix proportioning of self-compacting normal and high-strength concretes. Magazine of Concrete Research 65 (9) , pp. 546-556. 10.1680/macr.12.00164

Deeb, Rola, Karihaloo, Bhushan Lal

and Kulasegaram, Sivakumar

2013. Simulation of fiber orientation during the flow of ultra high performance self-compacting concrete. Presented at: EMI 2013: Engineering Mechanics Institute Conference, Evanston, IL, USA, 4-7 August 2013.

Dibley, Michael James, Li, Haijiang

, Rezgui, Yacine

and Miles, John Christopher 2013. Software agent reasoning supporting non-intrusive building space usage monitoring. Computers in Industry 64 (6) , pp. 678-693. 10.1016/j.compind.2013.03.008

Ding, L., Zhou, H., Lou, S., Ding, J., Zhang, D., Zhu, Hanxing

and Fan, T. 2013. Butterfly wing architecture assisted CdS/Au/TiO2 Z-scheme type photocatalytic water splitting. International Journal of Hydrogen Energy 38 (20) , pp. 8244-8253. 10.1016/j.ijhydene.2013.04.093

Donovan, Ceri, Davies, Huw Charles

and Fung, Tsz 2013. Electric Vehicles - Review of Type-Approval Legislation and the Identification and Prioritisation of Potential Risks. Presented at: 23rd International Technical Conference on the Enhanced Safety of Vehicles (ESV), Seoul, South Korea, 27-30 May 2013. The 23rd ESV Conference Proceedings. Washington, DC: NHTSA,

Drysdale, Brian, Wu, Jianzhong

and Jenkins, Nicholas

2013. Flexible Demand in the GB Domestic Electricity Sector in 2030. Presented at: The 5th International Conference on Applied Energy (ICAE2013), Pretoria, South Africa, 1-4 July 2013.

Du, Yan-Jun, Wei, Ming-Li, Jin, Fei

and Liu, Zhi-Bin 2013. Stress–strain relation and strength characteristics of cement treated zinc-contaminated clay. Engineering Geology 167 , pp. 20-26. 10.1016/j.enggeo.2013.10.005

E

Edwards, P., Kuznetsov, V., Slocombe, Daniel

and Vijayaraghavan, R. 2013. The electronic structure and properties of solids. Reedikj, J. and Poeppelmeier, K., eds. Comprehensive Inorganic Chemistry II, Elsevier,

Egea-Alvarez, Agusti, Junyent-Ferre, Adria, Gomis-Bellmunt, Oriol, Liang, Jun

and Ekanayake, Janaka

2013. Operation and control of VSC-HVDC multiterminal grids for offshore wind. EPE Journal 23 (2) , pp. 34-40.

El Mghairbi, Ahmed, Ahmeda, Mohammad, Harid, Noureddine

, Griffiths, Huw and Haddad, Abderrahmane

2013. Technique to increase the effective length of practical earth electrodes: simulation and field test results. Electric Power Systems Research 94 , pp. 99-105. 10.1016/j.epsr.2012.04.015

Eldukhri, Eldaw Elzaki and Kamil, Haider 2013. Optimisation of swing-up control parameters for a robot gymnast using the Bees Algorithm. Journal of Intelligent Manufacturing 26 (5) , pp. 1039-1047. 10.1007/s10845-013-0848-5

Elfergani, Hisham A., Pullin, Rhys

and Holford, Karen Margaret

2013. Damage assessment of corrosion in prestressed concrete by acoustic emission. Construction and Building Materials 40 , pp. 925-933. 10.1016/j.conbuildmat.2012.11.071

Elfergani, Hisham 2013. Acoustic emission analysis of prestressed concrete structures. PhD Thesis, Cardiff University.
Item availability restricted.

Elgabu, Hesham M. 2013. Critical evaluation of some suction measurement techniques. PhD Thesis, Cardiff University.
Item availability restricted.

Elkaseer, Ahmed

, Bigot, Samuel

, Surleraux, Anthony and Rosochowski, A. 2013. Effect of material microstructure on the micro-EDM process. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013.

Elkaseer, Ahmed

and Brousseau, Emmanuel Bruno Jean Paul

2013. Surface roughness prediction in AFM probe-based machining. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 97-100.

Emanuel, David 2013. The transport behaviour of creosote and coal tar in Severn Estuary alluvium. MPhil Thesis, Cardiff University.
Item availability restricted.

Evans, Henry Peredur

and Snidle, Raymond Walter

2013. Differential deflection method for deformation. Wang, Q. Jane and Chung, Yip-Wah, eds. Encyclopedia of Tribology, London: Springer, pp. 751-758. (10.1007/978-0-387-92897-5_638)

Evans, Henry Peredur

, Snidle, Raymond Walter

, Sharif, Khairi, Shaw, B. A. and Zhang, J. 2013. Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears. Journal of Tribology 135 (1) , 011501. 10.1115/1.4007693

Evans, Nicholas Rhys, Hooper, Georgina, Edwards, Rachel, Whatling, Gemma Marie

, Sparkes, Valerie

, Holt, Catherine Avril

and Ahuja, Sashin 2013. A 3D motion analysis study comparing the effectiveness of cervical spine orthoses at restricting spinal motion through physiological range. European Spine Journal 22 (S1) , pp. 10-15. 10.1007/s00586-012-2641-0

Evans, Paul Stephen

, Armstrong, Scott, Wilson, Catherine

and Fairley, Iain 2013. Characterisation of a Highly Energetic Tidal Energy Site with Specific Reference to Hydrodynamics and Bathymetry. Presented at: Tenth European Wave and Tidal Energy Conference, Aalborg, Denmark, 2-5 Sept 2013.

F

Fabre, A., Evans, Henry Peredur

, Barrallier, L., Sharif, Khairi and Desvignes, M. 2013. Prediction of microgeometrical influences on micropitting fatigue damage on 32CrMoV13 steel. Tribology International 59 , pp. 129-140. 10.1016/j.triboint.2012.07.018

Fahmy, Ashraf and Abdel Ghany, A. M. 2013. Neuro-fuzzy inverse model control structure of robotic manipulators utilized for physiotherapy applications. Ain Shams Engineering Journal 4 (4) , pp. 805-829. 10.1016/j.asej.2013.02.010

Falconer, Roger Alexander

and Xia, Junqiang 2013. Hydrodynamic modelling to support enhanced flood risk estimation. Revista de Obras Públicas 2013 (3542) , pp. 7-26.

Falconer, Roger Alexander

and Xia, Junqiang 2013. People and vehicle stability in floods. Innovation and Research Focus 2013 (95)

Fan, Yang-Ming, Pan, Shunqi

, Chen, Jia-Ming and Kao, Chia Chuen 2013. Ensemble wave forecasting over typhoon period. Presented at: OCEANS13 MTS/IEEE, Bergen, Norway, 10-13 June 2013. OCEANS - Bergen, 2013 MTS/IEEE. IEEE, 10.1109/OCEANS-Bergen.2013.6608029

Featherston, Carol

, Holford, Karen Margaret

, Pullin, Rhys

, Lees, Jonathan

, Eaton, Mark Jonathan

and Pearson, Matthew R.

2013. An autonomous structural health monitoring solution. Presented at: Microtechnologies 2013, Grenoble, France, 24-26 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. SPIE Microtechnologies. Society of Photo-Optical Instrumentation Engineers (SPIE), p. 876302. 10.1117/12.2018401

Fenrick, E., Ahmadian, Reza

, Bockelmann-Evans, Bettina Nicole

, Marx, W., Wieprecht, S. and Falconer, Roger Alexander

2013. An input-output approach to linking ecosystems to water quality effects of tidal power schemes. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Forrest, Sarah, Wilson, Christopher, Holt, Catherine Avril

and Whatling, Gemma Marie

2013. The utility of the approximate entropy as a preclinical tool for distinguishing between osteoarthritis patient groups and healthy volunteers. Presented at: Institution of Mechanical Engineers Biomedical Engineering Association Seminar Proceedings. Knee surgery and rehabilitation in 2013: How is engineering driving improved treatment?, London, 11-12 November 2013.

G

Gao, Guanghai, Falconer, Roger Alexander

and Lin, Binliang

2013. Modeling effects of a tidal barrage on water quality indicator distribution in the Severn Estuary. Frontiers of Environmental Science & Engineering 7 (2) , pp. 211-218. 10.1007/s11783-012-0464-1

Gao, Guanghai, Falconer, Roger Alexander

and Lin, Binliang

2013. Modelling importance of sediment effects on fate and transport of enterococci in the Severn Estuary. Marine Pollution Bulletin 67 (1/2) , pp. 45-54. 10.1016/j.marpolbul.2012.12.002

Gao, Guanghai, Zhou, G., Lin, Binliang

, Chen, Q. and Falconer, Roger Alexander

2013. Distributed numerical hydrological and hydrodynamic modelling for Yangtze river basin. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Gao, Min

2013. Thermoelectric module design under a given thermal input: theory and example. Journal of Electronic Materials 42 (7) , pp. 2239-2242. 10.1007/s11664-013-2591-2

Garcia Canadas, Jorge, Powell, Anthony V., Kaltzoglou, Andreas, Vaqueiro, Paz and Min, Gao

2013. Fabrication and evaluation of a skutterudite-based thermoelectric module for high-temperature applications. Journal of Electronic Materials 42 (7) , pp. 1369-1374. 10.1007/s11664-012-2241-0

Gardner, D. R., Herbert, Daniel Mark, Jayaprakash, Monica and Jefferson, Anthony Duncan

2013. Autonomic self-healing concrete: the capillary flow of cyanoacrylate in discrete cracks. Presented at: 3rd Cement and Concrete Science Conference, Portsmouth, UK, 2 - 3 September 2013.

Gardner, Diane Ruth

, Herbert, Daniel Mark, Jayaprakash, Monica and Jefferson, Anthony Duncan

2013. Autonomic self-healing concrete: the capillary flow of cyanoacrylate in discrete cracks. Presented at: 33rd Cement and Concrete Science Conference, Portsmouth, UK, 2-3 September 2013.

Gardner, Diane Ruth

, Herbert, Daniel Mark, Jayaprakash, Monica and Jefferson, Anthony Duncan

2013. Characterisation of healing agents for self-healing cementitious systems. Presented at: 4th International Conference on Self-Healing Materials (ICSHM2013), Ghent, Belgium, 16 - 20 June 2013.

Gay, Russell 2013. Friction and wear behaviour of self lubricating bearing liners. PhD Thesis, Cardiff University.
Item availability restricted.

Gay, Russell, Evans, Henry Peredur

, Snidle, Raymond Walter

and Bell, A.T. 2013. Modelling the variation of friction in a self-lubricating composite bearing due to wear. Presented at: 68th STLE Annual Meeting & Exhibition, Detroit Marriott at the Renaissance Center Detroit, MI, USA, 5-9 May 2013.

Gei, Massimiliano

, Springhetti, Roberta and Bortot, Eliana 2013. Performance of soft dielectric laminated composites. Smart Materials and Structures 22 (10) , 104014. 10.1088/0964-1726/22/10/104014

Georgiou, George, Eftekhari, Mahroo, Eames, Philip and Mourshed, Monjur

2013. A study of the effect of weighting indices for the development of TMY used for building simulation. Presented at: BS2013: 13th Conference of International Building Performance Simulation Association, Chambéry, France, 26-28 August 2013. Proceedings of BS2013: 13th Conference of International Building Performance Simulation Association. USA: International Building Performance Simulation Association, pp. 922-929.

Ghazzawi, Ahmed Ali, Nokes, Leonard Derek Martin

and Byrne, Carlton Barrie Baylis 2013. Kagers fat pad's load bearing function: Initial study. Journal of Bone and Joint Surgery 94-B (XVIII) , p. 58.

Gill, Richard, Rolfe, Steven, Harbottle, Michael John

, Smith, Jonathan and Thornton, Steven 2013. Stimulating in situ bioremediation in electron acceptor-limited zones by nitrate delivery using electrokinetics in a model scale aquifer. Presented at: 12th International UFZ-Deltares Conference on Groundwater-Soil-Systems and Water Resource Management, Barcelona, Spain, 16-19 April 2013.

González-Estrada, Octavio A., Natarajan, Sundararajan, Ródenas, Juan José, Nguyen-Xuan, Hung and Bordas, Stephane Pierre Alain

2013. Efficient recovery-based error estimation for the smoothed finite element method for smooth and singular linear elasticity. Computational Mechanics 52 (1) , pp. 37-52. 10.1007/s00466-012-0795-6

Gosling, Jonathan

, Sassi, Paola, Naim, Mohamed Mohamed

and Lark, Robert John

2013. Adaptable buildings: a systems approach. Sustainable Cities and Society 7 , pp. 44-51. 10.1016/j.scs.2012.11.002

Griffiths, C. A., Dimov, S. S., Rees, A., Dellea, O., Gavillet, J., Lacan, Franck Andre

and Hirshy, Hassan

2013. A novel texturing of micro injection moulding tools by applying an amorphous hydrogenated carbon coating. Surface and Coatings Technology 235 , pp. 1-9. 10.1016/j.surfcoat.2013.07.006

Groh, R. M. J., Weaver, P. M., White, S., Raju, G. and Wu, Zhang Ming

2013. A 2D equivalent single-layer formulation for the effect of transverse shear on laminated plates with curvilinear fibres. Composite Structures 100 , pp. 464-478. 10.1016/j.compstruct.2013.01.014

Groves, Rachel Beth, Coulman, Sion

, Birchall, James Caradoc

and Evans, Samuel Lewin

2013. An anisotropic, hyperelastic model for skin: experimental measurements, finite element modelling and identification of parameters for human and murine skin. Journal of the Mechanical Behaviour of Biomedical Materials 18 , pp. 167-180. 10.1016/j.jmbbm.2012.10.021

Gupta, Apeksha 2013. Developing a BIM-based methodology to support renewable energy assessment of buildings. PhD Thesis, Cardiff University.
Item availability restricted.

Gwynne, S., Falk, S., Gollins, S., Wills, L., Bateman, A., Cummins, S., Grabsch, H., Hawkins, M. A., Maggs, R., Mukherjee, S., Radhakrishna, G., Roy, R., Sharma, R. A., Spezi, Emiliano

and Crosby, T. 2013. Oesophageal chemoradiotherapy in the UK-current practice and future directions. Clinical Oncology 25 (6) , pp. 368-377. 10.1016/j.clon.2013.01.006

Gwynne, S., Spezi, Emiliano

, Sebag-Montefiore, D., Mukherjee, S., Miles, E., Conibear, J. and Staffurth, J. 2013. Improving radiotherapy quality assurance in clinical trials: assessment of target volume delineation of the pre-accrual benchmark case. British Journal of Radiology 86 (1024) , 20120398. 10.1259/bjr.20120398

H

Hales, Tristram

, Cole-Hawthorne, Clara, Lovell, Laurence and Evans, Samuel Lewin

2013. Assessing the accuracy of simple field based root strength measurements. Plant and Soil 372 (1-2) , pp. 553-565. 10.1007/s11104-013-1765-2

Hamilton-MacLaren, Fiona, Loveday, Dennis L. and Mourshed, Monjur

2013. Public opinions on alternative lower carbon wall construction techniques for UK housing. Habitat International 37 , pp. 163-169. 10.1016/j.habitatint.2011.12.015

Hamzeh Bahmani, Hamed, Anderson, Philip

, Hall, Jeremy

and Fox, David 2013. Eddy current koss estimation of edge burr-affected magnetic laminations based on equivalent electrical network—part II: analytical modeling and experimental results. IEEE Transactions on Magnetics 29 (2) , pp. 651-659. 10.1109/TPWRD.2013.2279634

Hamzehbahmani, Hamed, Anderson, Philip Ian

, Hall, Jeremy Peter

and Fox, David 2013. Inter-laminar insulation faults detection in magnetic cores using flux injection probe. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Hamzehbahmani, Hamed, Anderson, Philip Ian

, Hall, Jeremy Peter

and Fox, David 2013. Modeling inter-laminar insulation faults at random positions in laminated magnetic cores. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Hamzehbahmani, Hamed, Moses, Anthony John and Anayi, Fatih Jamel

2013. Opportunities and precautions in measurement of power loss in electrical steel laminations using the initial rate of rise of temperature method. IEEE Transactions on Magnetics 49 (3) , pp. 1264-1273. 10.1109/TMAG.2012.2227274

Han, G.C., Soo, S.L., Aspinwall, D.K. and Bhaduri, Debajyoti

2013. Research on the ultrasonic assisted WEDM of Ti-6Al-4V. Advanced Materials Research 797 , pp. 315-319. 10.4028/www.scientific.net/AMR.797.315

Harbottle, Michael John

, Zhang, Junlin and Gardner, Diane Ruth

2013. Combined physical and biological gel-based healing of cementitious materials. Presented at: Fourth International Conference on Self-Healing Materials (ICSHM2013), Ghent, Belgium, 16-18 June 2013. Proceedings of the Fourth International Conference on Self-Healing Materials. Ghent: Universiteit Gent, pp. 207-210.

Harries, Tom, Brammer, James, Bockelmann-Evans, Bettina Nicole

and Kwan, Alan Shu Khen

2013. Quantification and visualisation of blockage effects for a savonius type turbine using particle image velocimetry. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Hashoosh, Ahmed, Hirshy, Hassan

, Brousseau, Emmanuel Bruno Jean Paul

and Moosa, Ahmed 2013. Fabrication of aluminium nanowires by differential pressure injection. ISRN Nanomaterials 2013 , 132798. 10.1155/2013/132798

Hassan, Asghar, Marmaras, Charalampos, Xydas, Erotokritos, Cipcigan, Liana Mirela

and Jenkins, Nicholas

2013. Integration of wind power using V2G as a flexible storage. Presented at: IET Conference on Power in Unity: a Whole System Approach, London, UK, 16-17 October 2013. Proceedings: IET Conference on Power in Unity: a Whole System Approach. Stevenage: IET, 1.11. 10.1049/ic.2013.0123

Hassan, Asghar, Xydas, Erotokritos, Marmaras, Charalampos, Cipcigan, Liana Mirela

and Jenkins, Nicholas

2013. Integrating renewable energy with flexible storage systems: A case study of GB and Greece. Presented at: 48th International Universities' Power Engineering Conference (UPEC 2013), Dublin, Ireland, 2-5 September 2013.

Hatem, Wadhah Amer Hatem, Kwan, Alan Shu Khen

and Al-Tmeemy, S. 2013. Degree of collaboration measurement in face to face and computer mediated collaboration in design. Presented at: 20th International Workshop: Intelligent Computing in Engineering 2013, Vienna, Austria, 30 June - 3 July 2013.

Haynes, Mervin, Tasker, Paul J.

and Cripps, Stephen Charles

2013. High efficiency PA design strategy at X-Band. Presented at: 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS), Monterey, CA, USA, 13-16 October 2013. Compound Semiconductor Integrated Circuit Symposium (CSICS), 2013 IEEE. IEEE, pp. 1-4. 10.1109/CSICS.2013.6659232

Hepburn, Benjamin David Philip 2013. An investigation of the behaviour of the ground in response to energy extraction. PhD Thesis, Cardiff University.
Item availability restricted.

Herbert, Daniel Mark 2013. An investigation of the strength of brickwork walls when subject to flood loading. PhD Thesis, Cardiff University.
Item availability restricted.

Herbert, Daniel Mark, Gardner, Diane Ruth

, Harbottle, Michael John

and Hughes, Timothy Giffin 2013. Uniform lateral load capacity of small-scale masonry wall panels. Materials and Structures n/a 10.1617/s11527-013-0092-7

Hernandez, Juan D.

, Sanz, David, Rodríguez-Canosa, Gonzalo R., Barrientos, Jorge, del Cerro, Jaime and Barrientos, Antonio 2013. Sensorized robotic sphere for large exterior critical infrastructures supervision. Journal of Applied Remote Sensing 7 (1) , 073522. 10.1117/1.JRS.7.073522

Hernández, Juan David

, Barrientos, Jorge, del Cerro, Jaime, Barrientos, Antonio and Sanz, David 2013. Moisture measurement in crops using spherical robots. Industrial Robot: An International Journal 40 (1) , pp. 59-66. 10.1108/01439911311294255

Higgins, Michael 2013. Fitness of simulation: advancing the application of discrete event simulation within the automotive industry. MPhil Thesis, Cardiff University.
Item availability restricted.

Hoang, Khac Chi, Khoo, B. C., Liu, G. R., Nguyen, N. C. and Patera, A. T. 2013. Rapid identification of material properties of the interface tissue in dental implant systems using reduced basis method. Inverse Problems in Science and Engineering 21 (8) , pp. 1310-1334. 10.1080/17415977.2012.757315

Holford, Karen Margaret

, Eaton, Mark Jonathan

, Clarke, Alastair

, Pearson, Matthew R.

, Featherston, Carol Ann

and Pullin, Rhys

2013. Approaches to acoustic emission monitoring with applicability to key components in wind turbines. Presented at: 9th International Workshop on Structural Health Monitoring, Stanford, CA, USA, 10-12 September 2013.

Hone, Thomas M., Bensmida, Souheil, Morris, Kevin A., Beach, Mark A., McGeehan, Joe P., Lees, Jonathan

, Benedikt, Johannes

and Tasker, Paul J.

2013. Inverse active load-pull in an inverse Doherty amplifier. Presented at: 2013 IEEE Topical Conference on Power Amplifiers for Wireless and Radio Applications, Santa Clara, CA, USA, 20 Jauary 2013. Power Amplifiers for Wireless and Radio Applications (PAWR), 2013 IEEE Topical Conference on. IEEE, pp. 4-6. 10.1109/PAWR.2013.6490170

Hong, Ji, Pan, Shunqi

and Xilong, Han 2013. Effect of wastewater discharge on Jiangsu coastal environment, China. Journal of Coastal Research 65 , pp. 54-59. 10.2112/SI65-010

Horrillo-Caraballo, J. M., Reeve, D. E., Simmonds, D., Pan, Shunqi

, Fox, A., Thompson, R., Hoggarth, S., Kwan, S. S. H. and Greaves, D. 2013. Application of a source-pathway-receptor-consequence (S-P-R-C) methodology to the Teign Estuary, UK. Journal of Coastal Research (65) , pp. 1939-1944. 10.2112/SI65-328.1

Hosking, Lee

, Sedighi, Majid and Thomas, Hywel Rhys

2013. High pressure gas transport under coupled thermal, hydraulic, chemical and mechanical behaviour. Presented at: 3rd International Symposium on Computational Geomechanics (ComGeo III), Krakow, Poland, 21-23 August 2013. Proceedings of the 3rd International Symposium on Computational Geomechanics, Krakow, Poland, 21-23 August, 2013. pp. 381-388.

Hu, Xiaobo, Liang, Jun

, Rogers, Daniel J.

and Li, Yalou 2013. Power flow and power reduction control using variable frequency of offshore AC grids. IEEE Transactions on Power Systems 28 (4) , pp. 3897-3905. 10.1109/TPWRS.2013.2257884

Huang, G., Falconer, Roger Alexander

and Lin, Binliang

2013. Modelling fate and transport of faecal bacteria in the Ribble Estuary. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Huang, Guoxian, Falconer, Roger Alexander

, Boye, Brian A. and Lin, Binliang

2013. Cloud to coast: Integrated assessment of environmental exposure, health impacts and risk perceptions of faecal organisms in coastal waters. Presented at: HYDRO 2013: International 18th International Conference on Hydraulics, Water Resources, Coastal and Environmental Engineering, Department of Ocean Engineering, IIT Madras, India, 4-6 December 2013.

Hughes, M. G., Meyers, R., Nokes, Leonard Derek Martin

, Oliver, J., Stembridge, M. and Stone, K. 2013. The effect of high ambient temperature on the responses to a controlled football simulation. Presented at: 18th Annual Congress of the European College of Sport Science, Barcelona, Spain, 26-29 June 2013.

I

Ilanko, S., Mochida, Y., Hagedorn, P., Wagner, A. and Kennedy, David

2013. Modelling voids using embedded negative structures - the story of the spurious modes. Presented at: International Symposium on Vibrations of Continuous Systems, Courmayeur, Italy, 22 - 26 July 2013. Proceedings of the 9th International Symposium on Vibrations of Continuous Systems. pp. 34-36.

Imanguliyev, Azar 2013. Enhancements for the Bees Algorithm. PhD Thesis, Cardiff University.
Item availability restricted.

Isaacs, Ben, Lark, Robert John

, Jefferson, Anthony Duncan

, Davies, Robert Elfed

and Dunn, Simon 2013. Crack healing of cementitious materials using shrinkable polymer tendons. Structural Concrete 14 (2) , pp. 138-147. 10.1002/suco.201200013

J

Jaafar, W. M. N. Wan, Snyder, J. E. and Gao, Min

2013. Apparatus for measuring Seebeck coefficient and electrical resistivity of small dimension samples using infrared microscope as temperature sensor. Review of Scientific Instruments 84 (5) , 054903. 10.1063/1.4805016

Jamali, Hazim Umran, Sharif, Khairi, Evans, Henry Peredur

and Snidle, Raymond Walter

2013. Analysis of elastohydrodynamic lubrication of helical gear tooth contacts including the effects of crowning and the form of tip relief. Presented at: International Conference on Gears 2013, Dusseldorf, Germany, 7-9 October 2013. Proc International Conference on Gears.

Jennings, H.M., Masoero, E., Pinson, M.B., Strekalova, E.G., Bonnaud, P.A., Manzano, H., Ji, Q., Thomas, J.J., Pellenq, R.J.-M., Ulm, F.-J., Bazant, M.Z. and Van Vliet, K.J. 2013. Water isotherms, shrinkage and creep of cement paste: Hypotheses, models and experiments. Presented at: 9th International Conference on Creep, Shrinkage, and Durability Mechanics 2013 (CONCREEP-9), Cambridge, MA, USA, 22-25 September 2013. Published in: Franz-Josef, Ulm, Hamlin, Jennings M. and Pellenq, Roland J. -M. eds. Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Zdeněk P. Bažant. ASCE, pp. 134-141. 10.1061/9780784413111.015

Jia, Liang-wen, Pan, Shunqi

and Wu, Chao-yu 2013. Effects of the anthropogenic activities on the morphological evolution of the Modaomen Estuary, Pearl River Delta, China. China Ocean Engineering 27 (6) , pp. 795-808. 10.1007/s13344-013-0065-1

Jin, Fei

and Al-Tabbaa, Abir 2013. Thermogravimetric study on the hydration of reactive magnesia and silica mixture at room temperature. Thermochimica Acta 566 , pp. 162-168. 10.1016/j.tca.2013.05.036

Jin, Fei

, Gu, Kai and Al-Tabbaa, Abir 2013. Strength and drying shrinkage of reactive MgO modified alkali-activated slag paste. Construction and Building Materials 51 , pp. 395-404. 10.1016/j.conbuildmat.2013.10.081

K

Kadiri, Margaret Osikhofe, Ahmadian, Reza

, Bockelmann-Evans, Bettina Nicole

, Kay, D. and Falconer, Roger Alexander

2013. Impact of different marine renewable energy scheme operating modes on the eutrophication potential of the Severn Estuary. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Kadiri, Margaret Osikhofe, Bockelmann-Evans, Bettina

and Rauen, M. 2013. Nutrient dynamics in two contrasting estuaries in Wales. Presented at: Estuarine Coastal Sciences Association (ECSA) Symposium on the Problems in Small Estuaries, Swansea, Wales, UK, 8-11 April 2013.

Kadiri, Margaret Osikhofe, Kay, D., Ahmadian, Reza

, Bockelmann-Evans, Bettina Nicole

and Falconer, Roger Alexander

2013. Potential impacts of a barrage on the eutrophic status of the Severn Estuary, UK. Presented at: 10th European Wave and Tidal Energy Conference Series (EWTEC 2013), Aalborg, Denmark, 2-5 September 2013.

Kadiri, Margaret Osikhofe, Kay, D., Ahmadian, Reza

, Bockelmann-Evans, Bettina Nicole

, Falconer, Roger Alexander

and Bray, Michaela

2013. Impacts of marine renewable energy scheme operation on the eutrophication potential of the Severn Estuary, UK. Presented at: European Geosciences Union General Assembly 2013, Vienna, Austria, 7-12 April 2013.

Kaloskampis, Ioannis

2013. Recognition of complex human activities in multimedia streams using machine learning and computer vision. PhD Thesis, Cardiff University.
Item availability restricted.

Kamarudin, Muhammad 2013. Experimental investigation of CF3I-CO2 gas mixtures on the breakdown characteristics in uniform and nonuniform field configurations. PhD Thesis, Cardiff University.
Item availability restricted.

Karamnejad, Amin, Nguyen, Vinh Phu

and Sluys, Lambertus Johannes 2013. A multi-scale rate dependent crack model for quasi-brittle heterogeneous materials. Engineering Facture Mechanics 104 , pp. 96-113. 10.1016/j.engfracmech.2013.03.009

Karihaloo, Bhushan Lai

, Zhang, Kai and Wang, Jianxiang 2013. Honeybee combs: how the circular cells transform into rounded hexagons. Journal of the Royal Society Interface 10 (86) , 20130299. 10.1098/rsif.2013.0299

Karihaloo, Bhushan Lal

, Bordas, Stephane Pierre Alain

and Kerfriden, Pierre

2013. Advances in extended finite element methods for fracture and heterogeneous materials. Presented at: 13th International Conference on Fracture (ICF 2013), Beijing, China, 16-21 June 2013.

Karihaloo, Bhushan Lal

and Kulasegaram, Sivakumar

2013. Structural integrity considerations of a rocket thruster. Presented at: 8th International Conference on Structural Integrity and Fracture (SIF2013), Melbourne, Australia, 11-12 July 2013.

Karihaloo, Bhushan Lal

, Kulasegaram, Sivakumar

and Deeb, Rola 2013. Simulation of fiber orientation during the flow of ultra high performance self-compacting concrete. Presented at: Particles 2013: III International Conference on Particle-Based Methods, Fundamentals and Applications, Stuttgart, Germany, 18-20 September 2013.

Karihaloo, Bhushan Lal

, Murthy, A. Ramachandra and Iyer, Nagesh R. 2013. Determination of size-independent specific fracture energy of concrete mixes by the tri-linear model. Cement and Concrete Research 49 , pp. 82-88. 10.1016/j.cemconres.2013.03.010

Karimian, N., Wilson, J. W., Yin, W., Liu, J.

, Davis, C. L. and Peyton, A. J. 2013. Magnetic sensing for microstructural assessment of power station steels: differential permeability and magnetic hysteresis. Presented at: 17th Sensors and Their Applications Conference, Dubrovnik, Croatia, 16-18 September 2013. Journal of Physics: Conference Series. , vol.450 IOP Publishing: Conference Series, 10.1088/1742-6596/450/1/012042

Karimian, N., Wilson, J. W., Yin, W., Peyton, A. J., Liu, J.

, Strangwood, M. and Davis, C. L. 2013. Assessment of electromagnetic properties of power station steels for lifetime extension. Presented at: 52nd Annual Conference of the British Institute of Non-Destructive Testing 2013 (NDT 2013), Telford, England, 10-12 September 2013. 52nd Annual Conference of the British Institute of Non-Destructive Testing 2013 (NDT 2013). British Institute of Non-Destructive Testing, pp. 160-171.

Karimian, N., Yin, W., Liu, J.

, Hao, X. J., Strangwood, M., Davis, C. L. and Peyton, A. J. 2013. Non-contact EM measurement of the properties of power station steels taken from service. Presented at: 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Minneapolis, MN, USA, 6-9 May 2013. 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, pp. 1573-1578. 10.1109/I2MTC.2013.6555679

Katranas, G. S. and Meydan, Turgut

2013. Bi-layer sensor parameter optimisation in FM based systems. Sensor Letters 11 (1) , pp. 199-201. 10.1166/sl.2013.2799

Kawashita, Luiz F.

, Pernice, M. Francesca and Hallett, Stephen R. 2013. Mesh-independent cohesive crack model for the analysis of in-plane compression and shear failure in laminated composites. Presented at: IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, Azores, Portugal, 25 - 27 September 2013.

Kennedy, David

, Ilanko, Sinniah and Mochida, Yusuke 2013. Understanding spurious modes of structures with voids using dynamic stiffness method. Presented at: 9th International symposium on Vibrations of Continuous Systems, Courmayeur, Italy, 21 - 26 July 2013. Proceedings of the 9th International symposium on Vibrations of Continuous Systems. pp. 37-39.

Kerfriden, Pierre

, Goury, Olivier, Rabczuk, Timon and Bordas, Stephane Pierre Alain

2013. A partitioned model order reduction approach to rationalise computational expenses in nonlinear fracture mechanics. Computer Methods in Applied Mechanics and Engineering 256 , pp. 169-188. 10.1016/j.cma.2012.12.004

Kerfriden, Pierre

, Schmidt, Karl Michael

, Rabczuk, T. and Bordas, Stephane Pierre Alain

2013. Statistical extraction of process zones and representative subspaces in fracture of random composites. International Journal for Multiscale Computational Engineering 11 (3) , pp. 253-287. 10.1615/IntJMultCompEng.2013005939

Kettle, J., Rees, A., Brousseau, Emmanuel Bruno John Paul

and Horie, M. 2013. Low-temperature thermal nanoimprint lithography of anti-reflective structures for flexible low band gap organic solar cells. Journal of Physics D: Applied Physics 46 (10) , 105102. 10.1088/0022-3727/46/10/105102

Khan, Ilyas Mahmood, Francis, Lewis, Theobald, Peter

, Perni, Stefano, Young, Robert David

, Prokopovich, Polina

, Conlan, R. Steven and Archer, Charles William 2013. In vitro growth factor-induced bio engineering of mature articular cartilage. Biomaterials 34 (5) , pp. 1478-1487. 10.1016/j.biomaterials.2012.09.076

Kim, Dongjin, Stoesser, Thorsten

and Kim, Jae-Hong 2013. The effect of baffle spacing on hydrodynamics and solute transport in serpentine contact tanks. Journal of Hydraulic Research 51 (5) , pp. 558-568. 10.1080/00221686.2013.777681

Kim, Dongjin, Stoesser, Thorsten

and Kim, Jae-Hong 2013. Modeling aspects of flow and solute transport simulations in water disinfection tanks. Applied Mathematical Modelling 37 (16-17) , pp. 8039-8050. 10.1016/j.apm.2013.03.031

Koh, M., Bell, James J.

, Williams, D., Patterson, A., Wohlmuth, W., Lees, Jonathan

and Tasker, Paul J.

2013. X-band MMIC scalable large signal model based on unit cell behavioral data model and passive embedding network. Presented at: International Microwave Symposium, Seattle, WA, 2-7 June 2013. 2013 IEEE MTT-S International Microwave Symposium Digest (IMS). Picastaway, NJ: IEEE, pp. 1-4. 10.1109/MWSYM.2013.6697424

Kulasegaram, Sivakumar

and Karihaloo, Bhushan Lal

2013. Fibre-reinforced, self-compacting concrete flow modelled by smooth particle hydrodynamics. Proceedings of the ICE Engineering and Computational Mechanics 166 (1) , pp. 22-31. 10.1680/eacm.11.00004

Kural, Aleksander, Pullin, Rhys

, Holford, Karen Margaret

, Lees, Jonathan

, Naylon, Alexander Jack, Paget, Christophe and Featherston, Carol Ann

2013. Design and characterization of an ultrasonic lamb-wave power delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 60 (6) , pp. 1134-1140. 10.1109/TUFFC.2013.2676

Kural, Aleksander 2013. Ultrasonic lamb wave energy transmission system for aircraft structural health monitoring applications. PhD Thesis, Cardiff University.
Item availability restricted.

L

Labib, Amr, Kennedy, David

and Featherston, Carol Ann

2013. Natural frequencies of beams and frames with concentrated open cracks. Presented at: 9th International Symposium on Vibrations of Continuous Systems, Courmayeur, Italy, 21-26 July 2013. Proceedings of the 9th International Symposium on Vibrations of Continuous Systems. pp. 43-45.

Lakshmanan, Padmavathi and Janakiraman, Panapakkam Arumugam 2013. Reduction of voltage harmonics in three-phase inverters using discrete composite observers. Presented at: International Conference on Power Electronics, Drives, and Energy Systems for Industrial Growth, Delhi, India, 20-23 December 2010. Power Electronics, Drives and Energy Systems & 2010 Power India. , vol.1 New Jersey: Institute of Electrical and Electronics Engineers, pp. 181-185.

Lakshmanan, Padmavathi and Janakiraman, Panapakkam Arumugam 2013. Two-channel control of three-phase inverters for distortion reduction. Iet Power Electronics 6 (1) , pp. 192-201. 10.1049/iet-pel.2012.0270

Layton, Kelvin J., Gallichan, Daniel

, Testud, Frederik, Cocosco, Chris A., Welz, Anna M., Barmet, Christoph, Pruessmann, Klaas P., Hennig, Jürgen and Zaitsev, Maxim 2013. Single shot trajectory design for region-specific imaging using linear and nonlinear magnetic encoding fields. Magnetic Resonance in Medicine 70 (3) , pp. 684-696. 10.1002/mrm.24494

Lazzeri, Nicole, Mazzei, Daniele, Zaraki, Abolfazl

and De Rossi, Danilo 2013. Towards a believable social robot. Presented at: Living Machines: Conference on Biomimetic and Biohybrid Systems, London, 29 Jul - 2 Aug 2013. Published in: Lepora, Nathan F., Mura, Anna, Krapp, Holger G., Verschure, Paul F. M. J. and Prescott, Tony J. eds. Biomimetic and Biohybrid Systems. Lecture Notes in Computer Science. Lecture Notes in Computer Science , vol.8064 Berlin, Heidelberg: Springer Verlag, pp. 393-395. 10.1007/978-3-642-39802-5_45

Li, Joanna Yuen 2013. Development of a finite element model of the knee using patient specific magnetic resonance imaging data and biomechanical testing of soft tissues. PhD Thesis, Cardiff University.
Item availability restricted.

Li, Haijiang

, Rezgui, Yacine

and Rana, Omer Farooq

2013. Editorial for special issue: Cloud computing and distributed data management in the AEC - architecture, engineering and construction industry [Editorial]. Advanced Engineering Informatics 27 (2) , pp. 158-159. 10.1016/j.aei.2013.04.002

Li, Jinghai, Huang, Wenlai, Edwards, Peter P., Kwauk, Mooson, Houghton, John T. and Slocombe, Daniel Rhys

2013. On the universality of mesoscience: Science of 'the in-between'. [Online]. arXiv. Available at: http://arxiv.org/abs/1302.5861

Li, Yu-Chao and Cleall, Peter John

2013. Consolidation of sensitive clays: a numerical investigation. Acta Geotechnica 8 (1) , pp. 59-66. 10.1007/s11440-012-0171-x

Li, Yu-Chao, Liu, Hai-Long, Cleall, Peter John

, Ke, Han and Bian, Xue-Cheng 2013. Influences of operational practices on municipal solid waste landfill storage capacity. Waste Management & Research 31 (3) , pp. 273-282. 10.1177/0734242X12472705

Li, Yu-Chao, Pan, Qian, Cleall, Peter John

, Chen, Yun-Min and Ke, Han 2013. Stability analysis of slurry trenches in similar layered soils. ASCE Journal of Geotechnical and Geoenvironmental Engineering 139 (12) , pp. 2104-2109. 10.1061/(ASCE)GT.1943-5606.0000958

Lian, Haojie

, Simpson, Robert Napier and Bordas, Stephane Pierre Alain

2013. Stress analysis without meshing: Isogeometric boundary-element method. Proceedings of the Institution of Civil Engineers. Engineering and Computational Mechanics 166 (2) , pp. 88-99. 10.1680/eacm.11.00024

Liang, Dongfang, Wang, Xiaolin, Bockelmann-Evans, Bettina Nicole

and Falconer, Roger Alexander

2013. Study on nutrient distribution and interaction with sediments in a macro-tidal estuary. Advances in Water Resources 52 , pp. 207-220. 10.1016/j.advwatres.2012.11.015

Liang, Yan and Liu, Ying

2013. Rationale-based patent analysis for corporate product design. Presented at: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, OR, 4 - 7 August 2013. ASME Proceedings 33rd Computers and Information in Engineering Conference. , vol.2B ASME, V02BT02A013. 10.1115/DETC2013-12792

Libonati, Flavia and Crivelli, Davide

2013. Damage monitoring in composite materials by means of IR-Thermography and Acoustic Emission. Presented at: 42° Convegno Nazionale AIAS, Salerno, Italy, 11-14 September 2013. Proceedings of 42° Convegno Nazionale AIAS 2013. AIAS - Assciazione Italiana Analisi delle Sollecitazioni,

Licari, John 2013. Control of a variable speed wind turbine. PhD Thesis, Cardiff University.
Item availability restricted.

Licari, John, Ugalde Loo, Carlos Ernesto

, Ekanayake, Janaka

and Jenkins, Nicholas

2013. Damping of torsional vibrations in a variable-speed wind turbine. IEEE Transactions on Energy Conversion 28 (1) , pp. 172-180. 10.1109/TEC.2012.2224868

Lin, Weixing, Wen, Jinyu, Liang, Jun

, Cheng, Shijie, Yao, Meiqi and Li, Naihu 2013. A three-terminal HVDC system to bundle wind farms with conventional power plants. IEEE Transactions on Power Systems 28 (3) , pp. 2292-2300. 10.1109/TPWRS.2012.2228506

Littler, James, Geroni, Jennifer N., Sapsford, Devin James

, Coulton, R. and Griffiths, Anthony John 2013. Mechanisms of phosphorous removal by cement-bound ochre pellets. Chemosphere 90 (4) , pp. 1533-1538. 10.1016/j.chemosphere.2012.08.054

Liu, Xuezhi 2013. Combined analysis of electricity and heat networks. PhD Thesis, Cardiff University.
Item availability restricted.

Liu, Jia, Bray, Michaela

and Han, Dawei 2013. Exploring the effect of data assimilation by WRF-3DVar for numerical rainfall prediction with different types of storm events. Hydrological Processes 27 (25) , pp. 3627-3640. 10.1002/hyp.9488

Liu, Jun

, Liu, Changqing and Conway, Paul P. 2013. Kinetic Monte Carlo simulation of the electrodeposition of polycrystalline copper: Effects of substrates and deposition parameters on the microstructure of deposits. Electrochimica Acta 97 , pp. 132-142. 10.1016/j.electacta.2013.02.112

Liu, Jun

, Strangwood, Martin, Davis, Claire L. and Peyton, Anthony J. 2013. Magnetic evaluation of microstructure changes in 9Cr-1Mo and 2.25Cr-1Mo steels using electromagnetic sensors. Metallurgical and Materials Transactions A 44 (13) , pp. 5897-5909. 10.1007/s11661-013-1938-x

Liu, Ying

, Jin, Jian, Ji, Ping, Harding, Jenny A. and Fung, Richard Y.K. 2013. Identifying helpful online reviews: A product designer's perspective. Computer-Aided Design 45 (2) , pp. 180-194. 10.1016/j.cad.2012.07.008

Liu, Ying

, Lim, Soon Chong Johnson and Lee, Wing Bun 2013. Product family design through ontology-based faceted component analysis, selection, and optimization. Journal of Mechanical Design 135 (8) , 081007. 10.1115/1.4023632

Livermore, Luke 2013. Integration of offshore wind farms through High Voltage Direct Current networks. PhD Thesis, Cardiff University.
Item availability restricted.

M

Ma, C.F., Zhang, Y.H., Tan, P., Kennedy, David

, Williams, F. W. and Zhou, F.L. 2013. Non-stationary seismic response analysis of base-isolated buildings with many hysteretic devices. Computers & Structures 123 , pp. 39-47. 10.1016/j.compstruc.2013.04.003

Malhas, A., Wigdewrowitz, C. and Nokes, Leonard Derek Martin

2013. The effect of rotator cuff pathology on the pressure distribution of the glenohumeral joint in a biomechanical model. Journal of Bone and Joint Surgery 94-B (s. XXI) , p. 53.

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

and Evans, Samuel Lewin

2013. Influence of coated SiC particulates on the mechanical and magnetic behaviour of Fe-Co alloy composites. Journal of Materials Science 49 (6) , pp. 2578-2587. 10.1007/s10853-013-7954-9

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

and Evans, Samuel Lewin

2013. Structural and magnetic characterization of spark plasma sintered Fe-50Co alloys. MRS Proceedings 1516 , pp. 201-207. 10.1557/opl.2012.1669

Manoylov, Anton 2013. Modelling of mixed lubrication in plain bearings based on the theory of flow factors and incorporating a dry contact analysis. PhD Thesis, Cardiff University.
Item availability restricted.

Manoylov, Anton, Borodich, Feodor M.

and Evans, Henry Peredur

2013. Modelling of elastic properties of sintered porous materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 469 (2154) , 20120689. 10.1098/rspa.2012.0689

Manoylov, Anton, Bryant, Michael James and Evans, Henry Peredur

2013. Dry elasto-plastic contact of nominally flat surfaces. Tribology International 65 , pp. 248-258. 10.1016/j.triboint.2013.02.029

Manzano, H., Masoero, E., Lopez-Arbeloa, I. and M. Jennings, H. 2013. Mechanical behaviour of ordered and disordered calcium silicate hydrates under shear strain studied by atomic scale simulations. Presented at: 9th International Conference on Creep, Shrinkage, and Durability Mechanics 2013 (CONCREEP-9), Cambridge, MA, USA, 22-25 September 2013. Published in: Franz-Josef, Ulm, Hamlin, Jennings M. and Pellenq, Roland J. -M. eds. Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Zdeněk P. Bažant. ASCE, pp. 86-97. 10.1061/9780784413111.009

Manzano, Hegoi, Masoero, Enrico, Lopez-Arbeloa, Inigo and Jennings, Hamlin M. 2013. Shear deformations in calcium silicate hydrates. Soft Matter 9 (30) , pp. 7333-7341. 10.1039/c3sm50442e

Manzoor, Umar, Nefti, Samia and Rezgui, Yacine

2013. Categorization of malicious behaviors using ontology-based cognitive agents. Data & Knowledge Engineering 85 , pp. 40-56. 10.1016/j.datak.2012.06.006

Marcatili, S., Pettinato, C., Daniels, Stephen, Lewis, G., Edwards, Peter

, Fanti, S. and Spezi, Emiliano

2013. Development and validation of RAYDOSE: a Geant4-based application for molecular radiotherapy. Physics in Medicine and Biology 58 (8) , pp. 2491-2508. 10.1088/0031-9155/58/8/2491

Marchesi, Marianna

, KIm, S. G. and Matt, Dominik 2013. Application of the axiomatic design approach to the design of architectural systems: A literature review. Presented at: The 7th International Conference on Axiomatic Design., Worcester, MA, USA, 27-28 June 2013.

Marchesi, Marianna

, Sang-Gook, Kim, Fernandez, John and Matt, Dominik T. 2013. Conceptual design of a housing project based on axiomatic design. Presented at: The 2nd International Workshop on Design in Civil & Environmental Engineering, Worcester, MA, USA, 28-29 June 2013.

Martin, Philip 2013. Engineering an improvement in chest compression quality during simulated infant cardiopulmonary resuscitation. PhD Thesis, Cardiff University.
Item availability restricted.

Martin, Philip Stephen, Kemp, Alison Mary

, Theobald, Peter

, Maguire, Sabine Ann and Jones, Michael David

2013. Do chest compressions during simulated infant CPR comply with international recommendations? Archives of Disease in Childhood 98 , pp. 576-581. 10.1136/archdischild-2012-302583

Martin, Philip Stephen, Kemp, Alison Mary

, Theobald, Peter

, Maguire, Sabine Ann and Jones, Michael David

2013. Does a more "physiological" infant manikin design effect chest compression quality and create a potential for thoracic over-compression during simulated infant CPR? Resuscitation 84 (5) , pp. 666-671. 10.1016/j.resuscitation.2012.10.005

Martin, Philip Stephen, Theobald, Peter

, Kemp, Alison Mary

, Maguire, Sabine Ann, Maconochie, Ian and Jones, Michael David

2013. Real-time feedback can improve infant manikin cardiopulmonary resuscitation by up to 79%- A randomised controlled trial. Resuscitation 84 (8) , pp. 1125-1130. 10.1016/j.resuscitation.2013.03.029

Martinez, Luis, Stavrinadis, Alexandros, Higuchi, Sosuke, Diedenhofen, Silke Luzia, Bernechea, Maria

, Tajima, Keisuke and Konstantatos, Gerasimos 2013. Hybrid solution-processed bulk heterojunction solar cells based on bismuth sulfide nanocrystals. Physical Chemistry Chemical Physics 15 (15) , pp. 5482-5487. 10.1039/c3cp50599e

Masoero, E., Daro, P. and Chiaia, B. M. 2013. Progressive collapse of 2D framed structures: an analytical model. Engineering Structures 54 , pp. 94-102. 10.1016/j.engstruct.2013.03.053

Masoero, E., Manzano, H., Del Gado, E., Pellenq, R.J.-M., Ulm, F.-J. and Yip, S. 2013. Kinetic simulation of the logarithmic creep of cement. Presented at: 9th International Conference on Creep, Shrinkage, and Durability Mechanics 2013 (CONCREEP-9), Cambridge, MA, USA, 22-25 September 2013. Published in: Franz-Josef, Ilm, Hamlin, Jennings M. and Pellenq, Roland J. -M. eds. Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Zdeněk P. Bažant. ASCE, pp. 166-173. 10.1061/9780784413111.019

Mason-Jones, Allan

, O'Doherty, Daphne Maria, Morris, Ceri E. and O'Doherty, Timothy

2013. Influence of a velocity profile & support structure on tidal stream turbine performance. Renewable Energy 52 , pp. 23-30. 10.1016/j.renene.2012.10.022

Mason-Jones, Allan

, O'Doherty, Daphne Maria and O'Doherty, Timothy

2013. Tidal and marine energy in the UK - Identifying the future challenges for supply chain development. Presented at: 11th International Conference on Manufacturing Research (ICMR2013), Cranfield, UK, 19-20 September 2013. Published in: Shehab, E., Ball, P. and Tjahjono, B. eds. Proceedings of the 11th International Conference on Manufacturing Research. Advances in Manufacturing Technology (XXVII) Cranfield: Cranfield University Press, pp. 655-660.

Mastrocinque, Ernesto, Yuce, Baris

, Lambiase, Alfredo and Packianather, Michael Sylvester

2013. A multi-objective optimisation for supply chain network using the bees algorithm. International Journal of Engineering Business Management 5 , pp. 1-11. 10.5772/56754

Mazzei, Daniele, Greco, Alberto, Lazzeri, Nicole, Zaraki, Abolfazl

, Lanata, Antonio, Igliozzi, Roberta, Mancini, Alice, Stoppa, Francesca, Scilingo, Enzo Pasquale, Muratori, Filippo and De Rossi, Danilo 2013. Robotic social therapy on children with autism: preliminary evaluation through multi-parametric analysis. Presented at: 2012 International Conference on Social Computing (SocialCom), Amsterdam, The Netherlands, 3-5 September 2012. 2012 International Conference on Privacy, Security, Risk and Trust and 2012 International Confernece on Social Computing. IEEE, pp. 766-771. 10.1109/SocialCom-PASSAT.2012.101

McGenn, William 2013. RF IV waveform engineering applied to VSWR sweeps and RF stress testing. PhD Thesis, Cardiff University.
Item availability restricted.

McLeod, Robert S. 2013. An investigation into the performance of low energy and zero carbon buildings in a changing climate: applying the Passivhaus standard to the UK context. PhD Thesis, Cardiff University.
Item availability restricted.

McLeod, Robert S. and Hopfe, Christina 2013. Hygrothermal implications of low and zero energy standards for building envelope performance in the UK. Journal of Building Performance Simulation 6 (5) , pp. 367-384. 10.1080/19401493.2012.762809

McLeod, Robert S., Hopfe, Christina J. and Kwan, Alan Shu Khen

2013. An investigation into future performance and overheating risks in Passivhaus dwellings. Building and Environment 70 , pp. 189-209. 10.1016/j.buildenv.2013.08.024

McWhirter, John

, Alrmah, M. A. and Weiss, S. 2013. Implementation of accurate broadband steering vectors for broadband angle of arrival estimation. Presented at: IET Intelligent Signal Processing, London, 2-3 December 2013. Intelligent Signal Processing Conference 2013 (ISP 2013), IET. IET, 10.1049/cp.2013.2057

McWhirter, John

, Alrmah, M. A., Weiss, S., Redif, S. and Lambotharan, S. 2013. Angle of arrival estimation for broadband signals. Presented at: IET Intelligent Signal Processing, London, 2-3 December 2013. 10.1049/cp.2013.2066

McWhirter, John

, Weiss, S., Alrmah, M. A., Lambotharan, S. and Kaveh, M. 2013. Broadband angle of arrival estimation methods in a polynomial matrix decomposition framework. Presented at: IEEE 5th Int. Workshop on Computational Advances in Multisensor Adaptive Processing, Saint Martin, 15-18 December 2013. 10.1109/CAMSAP.2013.6714019

Meesapawong, Pawadee 2013. Managing innovation in public research and development organisations using a combined Delphi and Analytic Hierarchy Process approach. PhD Thesis, Cardiff University.
Item availability restricted.

Mele, Emanuele 2013. The application of microfluidics to continuous water toxicity monitoring. MPhil Thesis, Cardiff University.
Item availability restricted.

Meng, Fan-Lin and Zeng, Xiao-Jun 2013. A Stackelberg game-theoretic approach to optimal real-time pricing for the smart grid. Soft Computing 17 (12) , pp. 2365-2380. 10.1007/s00500-013-1092-9

Metcalfe, A. J., Stewart, C., Postans, N., Dodds, A. L., Holt, Catherine Avril

and Roberts, A. P. 2013. The effect of osteoarthritis of the knee on the biomechanics of other joints in the lower limbs. The Bone & Joint Journal 95-B (3) , pp. 348-353. 10.1302/0301-620X.95B3.30850

Metcalfe, Andrew John, Madete, June Kazira, Whatling, Gemma Marie

, Kempshall, Peter, Lyons, Kath, Holt, Catherine Avril

and Forster, M. 2013. The relationship between joint alignment and kinematics in total knee arthroplasty: an in-vivo biomechanical analysis. Presented at: Institution of Mechanical Engineers Biomedical Engineering Association Seminar Proceedings. Knee surgery and rehabilitation in 2013: How is engineering driving improved treatment?, London, 11-12 Nov 2013. Institution of Mechanical Engineers Biomedical Engineering Association Seminar Proceedings. Knee surgery and rehabilitation in 2013: How is engineering driving improved treatment?

Metcalfe, Andrew

, Stewart, Caroline, Postans, Neil, Barlow, David, Dodds, Alexander, Holt, Catherine Avril

, Whatling, Gemma Marie

and Roberts, Andrew 2013. Abnormal loading of the major joints in knee osteoarthritis and the response to knee replacement. Gait & Posture 37 (1) , pp. 32-36. 10.1016/j.gaitpost.2012.04.018

Mihai, Iulia Carmen

and Jefferson, Anthony Duncan

2013. A multi-asperity plastic-contact crack plane model for geomaterials. International Journal for Numerical and Analytical Methods in Geomechanics 37 (11) , pp. 1492-1507. 10.1002/nag.2094

Mihai, Iulia Carmen

and Jefferson, Anthony Duncan

2013. Smoothed contact in a micromechanical model for cement bound materials. Computers & Structures 118 , pp. 115-125. 10.1016/j.compstruc.2012.11.002

Mihi, Agustín, Bernechea, Maria

, Kufer, Dominik and Konstantatos, Gerasimos 2013. Coupling resonant modes of embedded dielectric microspheres in solution-processed solar cells. Advanced Optical Materials 1 (2) , pp. 139-143. 10.1002/adom.201200015

Mihi, Agustín, Bernechea, Maria

, Kufer, Dominik and Konstantatos, Gerasimos 2013. Microresonators: coupling resonant modes of embedded dielectric microspheres in solution-processed solar cells (advanced optical materials 2/2013). Advanced Optical Materials 1 (2) , p. 194. 10.1002/adom.201370012

Min, Gao

2013. Principle for detecting resonant states in thermoelectric materials using a superconductor tunneling junction. Journal of Electronic Materials 42 (7) , pp. 1555-1557. 10.1007/s11664-012-2318-9

Minev, R., Minev, E. and Bigot, Samuel

2013. How to implement the grid method analyses for capability studies of MNTs. Presented at: 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9-11 October 2012. 9th International Conference on Multi-Material Micro Manufacture.

Mohd, Shukri 2013. Acoustic emission for fatigue crack monitoring in nuclear piping system. PhD Thesis, Cardiff University.

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2013. A conceptual model of a trademark retrieval system based on conceptual similarities. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: Invited Session Proceedings. pp. 300-309.

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2013. Trademark image retrieval using an integrated shape descriptor. Expert Systems with Applications 40 (1) , pp. 105-121. 10.1016/j.eswa.2012.07.031

Montecchi, Tiziano, Russo, Davide and Liu, Ying

2013. Searching in cooperative patent classification: comparison between keyword and concept-based search. Advanced Engineering Informatics 27 (3) , pp. 335-345. 10.1016/j.aei.2013.02.002

Morgan, Alex John

, Naylon, Alexander Jack, Gooding, Sarah Victoria, John, Christopher David, Squires, Oliver Leslie, Lees, Jonathan

, Barrow, David Anthony

and Porch, Adrian

2013. Efficient microwave heating of microfluidic systems. Sensors and Actuators B: Chemical 181 , pp. 904-909. 10.1016/j.snb.2013.02.099

Morini, Lorenzo

, Piccolroaz, A., Mishuris, G. and Radi, E. 2013. Integral identities for a semi-infinite interfacial crack in anisotropic elastic bimaterials. International Journal of Solids and Structures 50 (9) , pp. 1437-1448. 10.1016/j.ijsolstr.2013.01.021

Morini, Lorenzo

, Piccolroaz, A., Mishuris, G. and Radi, E. 2013. On fracture criteria for dynamic crack propagation in elastic materials with couple stresses. International Journal of Engineering Science 71 , pp. 45-61. 10.1016/j.ijengsci.2013.05.005

Morini, Lorenzo

, Piccolroaz, A and Mishuris, G 2013. Dynamic energy release rate in couple-stress elasticity. Journal of Physics: Conference Series 451 , 012014. 10.1088/1742-6596/451/1/012014

Morini, Lorenzo

, Radi, E., Movchan, A. and Movchan, N. 2013. Stroh formalism in analysis of skew-symmetric and symmetric weight functions for interfacial cracks. Mathematics and Mechanics of Solids 18 (2) , pp. 135-152. 10.1177/1081286512462299

Morris, Ceri E., Mason-Jones, Allan

, O'Doherty, Daphne Maria, Tatum, Sarah C., O'Doherty, Timothy

and Thompson, D. S. 2013. Evaluation of the swirl characteristics of a tidal stream turbine wake. Presented at: EWTEC 2013 - 10th European Wave and Tidal Energy Conference, Aalborg, Denmark, 2-5 September 2013.

Moses, Anthony John and Anderson, Philip Ian

2013. Origins, and some approaches to reduction of acoustic noise emitted from power transformer cores on no-load. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Mourshed, Monjur

2013. Pitfalls of oil-based expansion of electricity generation in a developing context. Energy Strategy Reviews 1 (3) , pp. 205-210. 10.1016/j.esr.2012.08.001

Mu, Yunfei, Wu, Jianzhong

, Ekanayake, Janaka

, Jenkins, Nicholas

and Jia, Hongjie 2013. Primary frequency response from electric vehicles in the Great Britain power system. IEEE Transactions on Smart Grid 4 (2) , pp. 1142-1150. 10.1109/TSG.2012.2220867

Mukherjee, Somnath, Halle, Charlotte, Spezi, Emiliano

, Joseph, George, Mary, Jennifer, Branagan, Rose, Hurt, Chris Nicholas

, Falk, Stephen, Nixon, Lisette Sheena

, Abrams, Ross A. and Staffurth, John Nicholas

2013. Comparison of investigator-delineated GTV in chemoradiotherapy (CRT) for locally advanced nonmetastatic pancreatic cancer (LANPC): Analysis of the pretrial test case for the SCALOP trial. Journal of Clinical Oncology 31 (4) , 230.

Muñoz Criollo, J. J., Cleall, Peter John

and Rees, Stephen William

2013. Impacts of surface fluxes on interseasonal heat storage in soils. Presented at: International Workshop on Geomechanics and Energy, Lausanne, Switzerland, 26-28 November 2013. 10.3997/2214-4609.20131947

N

Natarajan, S., Ferreira, A. J. M., Bordas, Stephane Pierre Alain

, Carrera, E. and Cinefra, M. 2013. Analysis of composite plates by a unified formulation-cell based smoothed finite element method and field consistent elements. Composite Structures 105 , pp. 75-81. 10.1016/j.compstruct.2013.04.040

Newman, Daniel

, Wells, Peter Erskine

, Donovan, Ceri, Nieuwenhuis, Paul Andre Henri Francois and Davies, Huw Charles

2013. Urban, sub-urban or rural: where is the best place for electric vehicles? Presented at: 21st International Colloquium of Gerpisa, Paris, France, 12-14 June 2013.

Nguyen, Vinh Phu

and Nguyen-Xuan, Hung 2013. High order B-splines based finite elements for the delamination analysis of laminated composites. Composite Structures 102 , pp. 261-275. 10.1016/j.compstruct.2013.02.029

Nilsson, J., Stevenson, R. M., Chan, K. H. A., Skiba-Szymanska, J., Lucamarini, M., Ward, M. B., Bennett, Anthony

, Salter, C. L., Farrer, I., Ritchie, D. A. and Shields, A. J. 2013. Quantum teleportation using a light-emitting diode. Nature Photonics 7 (4) , pp. 311-315. 10.1038/nphoton.2013.10

Nistor, Silviu

, Wu, Jianzhong

, Ekanayake, Janaka

and Sooriyabandara, Manesh 2013. Capability of smart appliances to provide reserve services. Presented at: The 5th International Conference on Applied Energy, ICAE2013, Pretoria, South Africa, 1-4 July 2013.

Nistor, Silviu

, Wu, Jianzhong

and Sooriyabandara, Manesh 2013. The impact and opportunities of smart appliances on distribution networks. Presented at: 2013 IEEE ISGT Europe, Lyngby, Denmark, 6-9 October 2013. Innovative Smart Grid Technologies Europe (ISGT EUROPE), 2013 4th IEEE/PES. Picastaway, NJ: IEEE, pp. 1-4. 10.1109/ISGTEurope.2013.6695479

O

Ogboi, Friday Lawrence, Tasker, Paul J.

, Akmal, Muhammad, Lees, Jonathan

, Benedikt, Johannes

, Bensmida, S., Morris, K., Beach, M. and McGeehan, J. 2013. A LSNA configured to perform baseband engineering for device linearity investigations under modulated excitations. Presented at: 43rd European Microwave Conference, Nuremberg, Germany, 7-10 October 2013. Proceedings of the 43rd European Microwave Conference. 2013 EUROPEAN MICROWAVE CONFERENCE (EUMC). pp. 684-687.

Omar, Fuad 2013. Hot embossing process parameters: Simulation and experimental studies. PhD Thesis, Cardiff University.
Item availability restricted.

Omar, Fuad, Elkaseer, Ahmed

, Brousseau, Emmanuel

, Kolew, Alexander and Prokopovich, Polina

2013. Demoulding forces in hot embossing: Model development and validation. Presented at: 8th International Conference on MicroManufacturing (ICOMM2013), Victoria, Canada, 25-28 March 2013. Proceedings of the 8th International Conference on MicroManufacturing (ICOMM2013). 8th International Conference on MicroManufacturing (ICOMM2013). pp. 642-649.

Omar, Fuad, Kolew, Alexander, Brousseau, Emmanuel Bruno Jean Paul

and Hirshy, Hassan

2013. Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing. Journal of Micro and Nano-Manufacturing 1 (2) , 021002. 10.1115/1.4024097

P

Pal, Rama, Rao, Sudhakar M. and Sadasivam, Siva

2013. Mitigation of cromium contamination by copper-ZVI bimetallic particles. Journal of Hazardous, Toxic, and Radioactive Waste 17 (3) , pp. 181-186. 10.1061/(ASCE)HZ.2153-5515.0000169

Pan, Shunqi

, Horrillo-Caraballo, J., Reeve, E. D. and Simmonds, D. 2013. Morphological modelling of V-shaped submerged breakwaters. Presented at: Coasts, Marine Structures and Breakwaters 2013, Edinburgh, UK, 18-20 Sept 2013.

Papadopoulos, Panagiotis, Jenkins, Nicholas

, Cipcigan, Liana Mirela

, Grau, Inaki and Zabala, Eduardo 2013. Coordination of the charging of electric vehicles using a multi-agent system. IEEE Transactions on Smart Grid 4 (4) , pp. 1802-1809. 10.1109/TSG.2013.2274391

Pasikowska, Agata, Zaraki, Abolfazl

and Lazzeri, Nicole 2013. A dialogue with a virtual imaginary interlocutor as a form of a psychological support for well-being. Presented at: MIDI '13: MIDI - Multimedia Interaction, Design and Innovation, Warsaw, Poland, 24-25 June 2013. MIDI '13: Proceedings of the International Conference on Multimedia, Interaction, Design and Innovation. ACM, pp. 1-15. 10.1145/2500342.2500359

Pearson, Matthew R.

, Eaton, Mark Jonathan, Szigeti, Eszter, Pullin, Rhys

, Clarke, Alastair

, Burguete, Richard and Featherston, Carol Ann

2013. Damage detection in composite materials using airborne acoustics. Key Engineering Materials 569-57 , pp. 72-79. 10.4028/www.scientific.net/KEM.569-570.72

Pearson, Matthew

2013. Development of lightweight structural health monitoring systems for aerospace applications. PhD Thesis, Cardiff University.
Item availability restricted.

Pearson, Matthew

, Lees, Jonathan

, Featherston, Carol

and Pullin, Rhys

2013. 9th international conference on advances in experimental mechanics. Presented at: 9th International Conference on Advances in Experimental Mechanics, Cardiff, Wales, 3 - 5 September 2013.

Peirce, Susan Caroline

, Ray, Alistair

and Carolan-Rees, Grace 2013. Diagnostic reliability of sterile speculum exam for rupture of membranes [Letter]. Acta Obstetricia et Gynecologica Scandinavica 92 (9) , pp. 1116-1117. 10.1111/aogs.12177

Penman, Kristina Mary 2013. The optimisation of stope leaching: a laboratory investigation into the extraction of uranium from a low-grade ore. MPhil Thesis, Cardiff University.
Item availability restricted.

Perni, Stefano and Prokopovich, Polina

2013. Micropatterning with conical features can control bacterial adhesion on silicone. Soft Matter 9 (6) , pp. 1844-1851. 10.1039/c2sm26828k

Pernice, M Francesca, Kawashita, Luiz F.

and Hallett, Stephen R. 2013. Modeling of delamination migration in DCB test on multidirectional composite laminates. Presented at: 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC2013), Prague, Czech Republic, 5-7 June 2013.

Pernice, M. Francesca, Kawashita, Luiz F.

and Hallett, Stephen R. 2013. Analysis of crack migration in laminated composites using conventional and mesh-independent cohesive zone models. Presented at: 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 28 July - 02 August 2013.

Pettinato, C., Celli, M., Cima, S., Monari, F., Civollani, S., Nanni, C., Allegri, V., Zagni, P., Mazzarotto, R., Spezi, Emiliano

and Fanti, S. 2013. Salivary gland dosimetry using 124I-PET/CT imaging and MIRD method. European Journal of Nuclear Medicine and Molecular Imaging 40 , S125-S126.

Pettinato, C., Nanni, C., Celli, M., Allegri, V., Monari, F., Cima, S., Civollani, S., Zagni, P., Mazzarotto, R., Spezi, Emiliano

and Fanti, S. 2013. Negative predictive value of 124I-PET/CT imaging in patients affected by metastatic thyroid cancer and treated with 131I. European Journal of Nuclear Medicine and Molecular Imaging 40 , S276-S276.

Phophongviwat, Teeraphon

2013. Investigation of the influence of magnetostriction and magnetic forces on transformer core noise and vibration. PhD Thesis, Cardiff University.
Item availability restricted.

Phophongviwat, Teeraphon

, Anderson, Philip Ian

and Moses, Anthony John 2013. Relationship between vibration and acoustic noise of 3 phase 3 limb transformer cores. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Phrueksanant, Janyarat 2013. Machine scheduling using the Bees algorithm. PhD Thesis, Cardiff University.
Item availability restricted.

Pirouti, Marouf 2013. Modelling and analysis of a district heating network. PhD Thesis, Cardiff University.
Item availability restricted.

Pirouti, Marouf, Bagdanavicius, Audrius, Ekanayake, Janaka

, Wu, Jianzhong

and Jenkins, Nicholas

2013. Energy consumption and economic analyses of a district heating network. Energy 57 , pp. 149-159. 10.1016/j.energy.2013.01.065

Plaza, Piotr 2013. The development of a slagging and fouling predictive methodology for large scale pulverised boilers fired with coal/biomass blends. PhD Thesis, Cardiff University.
Item availability restricted.

Porch, Adrian

, Slocombe, Daniel Rhys and Edwards, Peter P. 2013. Microwave absorption in powders of small conducting particles for heating applications. Physical Chemistry Chemical Physics 15 (8) , pp. 2757-2763. 10.1039/C2CP43310A

Porch, Adrian

, Slocombe, Daniel Rhys

and Edwards, Peter P. 2013. Microwave absorption in powders of small conducting particles for heating applications. Physical Chemistry Chemical Physics 15 (8) , pp. 2757-2763. 10.1039/c2cp43310a

Prickett, Paul William

and Aparicio Aikin, Ivan 2013. eTRIZ a portal for design creativity. Frontiers in Artificial Intelligence and Applications 255 , 197 - 206. 10.3233/978-1-61499-264-6-197

Prickett, Paul William

and Aparicio Aikin, Ivan 2013. eTRIZ a portal for design creativity. Presented at: 5th International Conference on Intelligent Decision Technologies - KES IDT 2013, Sesimbra, Portugal, 26-28 June 2013. Proceedings of the Fifth.

Prokopovich, Polina

, Leech, Ralph, Carmalt, C. J., Parkin, I. P. and Perni, Stefano 2013. A novel bone cement impregnated with silver-tiopronin nanoparticles: its antimicrobial, cytotoxic, and mechanical properties. International Journal of Nanomedicine 8 (1) , pp. 2227-2237. 10.2147/IJN.S42822

Prokopovich, Polina

and Perni, Stefano 2013. Contact interactions of aorta against PVC catheters. Tribology International 66 , pp. 157-164. 10.1016/j.triboint.2013.03.009

Pryce, L, Morini, Lorenzo

and Mishuris, G 2013. Analysis of interfacial crack propagation under asymmetric loading in anisotropic materials. Journal of Physics: Conference Series 451 , 012011. 10.1088/1742-6596/451/1/012011

Pryce, Lewis, Morini, Lorenzo

and Mishuris, Gennady 2013. Weight function approach to a crack propagating along a bimaterial interface under arbitrary loading in an anisotropic solid. Journal of Mechanics of Materials and Structures 8 (8-10) , pp. 479-500. 10.2140/jomms.2013.8.479

Pugh, Daniel

2013. Combustion characterisation of compositionally dynamic steelworks gases. PhD Thesis, Cardiff University.
Item availability restricted.

Pugh, Daniel

, Giles, Anthony

, Hopkins, Andrew, O'Doherty, Timothy

, Griffiths, Anthony John and Marsh, Richard

2013. Thermal distributive blast furnace gas characterisation, a steelworks case study. Applied Thermal Engineering 53 (2) , pp. 358-365. 10.1016/j.applthermaleng.2012.05.014

Pugh, Daniel

, O'Doherty, Timothy

, Griffiths, Anthony John, Bowen, Philip John

, Crayford, Andrew Philip

and Marsh, Richard

2013. Sensitivity to change in laminar burning velocity and Markstein length resulting from variable hydrogen fraction in blast furnace gas for changing ambient conditions. International Journal of Hydrogen Energy 38 (8) , pp. 3459-3470. 10.1016/j.ijhydene.2012.12.081

Pullin, Rhys

, Pearson, Matthew R.

, Eaton, Mark Jonathan

, Featherston, Carol Ann

, Holford, Karen Margaret

and Clarke, Alastair

2013. Automated damage detection in composite components using acoustic emission. Key Engineering Materials 569-57 , pp. 80-87. 10.4028/www.scientific.net/KEM.569-570.80

Q

Qadrdan, Meysam

, Ghodsi, Mansoureh and Wu, Jianzhong

2013. Probabalistic wind power forecasting using a single forecast. International Journal of Energy and Statistics 1 (2) , p. 99. 10.1142/S2335680413500075

Qiu, Chunlei

, Adkins, Nicholas J.E. and Attallah, Moataz M. 2013. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V. Materials Science and Engineering: A 578 , pp. 230-239. 10.1016/j.msea.2013.04.099

Qiu, Chunlei

and Andrews, P. 2013. On the formation of irregular-shaped gamma prime and serrated grain boundaries in a nickel-based superalloy during continuous cooling. Materials Characterization 76 , pp. 28-34. 10.1016/j.matchar.2012.11.012

Qiu, Chunlei

, Attallah, M.M., Wu, X.H. and Andrews, P. 2013. Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder. Materials Science and Engineering: A 564 , pp. 176-185. 10.1016/j.msea.2012.11.084

Qiu, Chunlei

, Wu, Xinhua, Mei, Junfa, Andrews, Paul and Voice, Wayne 2013. Influence of heat treatment on microstructure and tensile behavior of a hot isostatically pressed nickel-based superalloy. Journal of Alloys and Compounds 578 , pp. 454-464. 10.1016/j.jallcom.2013.06.045

Qiu, R.

, Ji, Ze

, Chivarov, N., Arbeiter, G., Weisshardt, F., Rooker, M., Lopez, R., Kronreif, G., Spanel, M. and Li, D. 2013. The development of a semi-autonomous framework for personal assistant robots - SRS project. International Journal of Intelligent Mechatronics and Robotics 3 (4) , pp. 30-47. 10.4018/ijimr.2013100102

Quaglia, Roberto

, Pirola, Marco and Ramella, Chiara 2013. Offset lines in Doherty Power Amplifiers: analytical demonstration and design. IEEE Microwave and Wireless Components Letters 23 (2) , pp. 93-95. 10.1109/LMWC.2013.2241535

R

Rafiee, Ahmad

and Hillestad, M. 2013. Staging of the Fischer-Tropsch Reactor with a cobalt-based catalyst. Chemical Engineering & Technology 36 (10) , pp. 1729-1738. 10.1002/ceat.201200700

Rahgoshay, Mohammad and Noorikalkhoran, Omid

2013. Calculation of control rod worth and temperature reactivity coefficient of fuel and coolant with burn-up changes for VVRS-2MWth nuclear reactor. Nuclear Engineering and Design 256 , pp. 322-331. 10.1016/j.nucengdes.2012.08.033

Raju, Gangadharan, Wu, Zhangming

and Weaver, Paul M. 2013. Postbuckling analysis of variable angle tow plates using differential quadrature method. Composite Structures 106 , pp. 74-84. 10.1016/j.compstruct.2013.05.010

Raju, Gangadharan, Wu, Zhangming

and Weaver, Paul 2013. Postbuckling response of variable angle tow composite plates under shear load. Presented at: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Structures, Structural Dynamics, and Materials and Co-located Conferences, Boston, MA, USA, 8-11 April 2013. 10.2514/6.2013-1822

Ramachandra Murthy, A., Karihaloo, Bhushan Lal

, Iyer, Nagesh R. and Raghu Prasad, B. K. 2013. Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy. Construction and Building Materials 47 , pp. 1160-1166. 10.1016/j.conbuildmat.2013.06.004

Ramachandra Murthy, A., Karihaloo, Bhushan Lal

, Iyer, Nagesh R. and Raghu Prasad, B. K. 2013. Determination of size-independent specific fracture energy of concrete mixes by two methods. Cement and Concrete Research 50 , pp. 19-25. 10.1016/j.cemconres.2013.03.015

Ramanathan, Sreevathsan 2013. Study of dislocations from continuous flattening anneal and its effect on magnetic properties of grain oriented electrical steel. PhD Thesis, Cardiff University.
Item availability restricted.

Rameshwaran, Ponnamblalam, Naden, Pamela, Wilson, Catherine

, Malki, Rami, Shukla, Deepak and Shiono, Koji 2013. Inter-comparison and validation of computational fluid dynamics codes in two-stage meandering channel flows. Applied Mathematical Modelling 37 , pp. 8652-8672. 10.1016/j.apm.2013.07.016

Ramírez, F. Javier, Domingo, Rosario, Sebastián, Miguel A. and Packianather, Michael Sylvester

2013. The development of competencies in manufacturing engineering by means of a deep-drawing tool. Journal of Intelligent Manufacturing 24 (3) , pp. 457-472. 10.1007/s10845-011-0575-8

Rao, Sudhakar M., Asha, K. and Sadasivam, Siva

2013. Influence of anthropogenic contamination on groundwater chemistry in Mulbagal town, Kolar District, India. Geosciences Journal 17 (1) , pp. 97-106. 10.1007/s12303-013-0007-1

Rao, Sudhakar M. and Sadasivam, Siva

2013. Characterization and iodide adsorption behaviour of HDPY+ modified bentonite. Environmental Earth Sciences 68 (2) , pp. 559-566. 10.1007/s12665-012-1759-z

Rees, Andrew, Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov, Bigot, Samuel

and Griffiths, Christian Andrew 2013. Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding. International Journal of Advanced Manufacturing Technology 64 (9-12) , pp. 1395-1410. 10.1007/s00170-012-4110-7

Rees, Stephen William

, Cleall, Peter John

, Li, Y.-C. and Shao, Kangjie 2013. Freezing soil effects on earth-contact heat transfer. Building Services Engineering Research and Technology 34 (3) , pp. 259-274. 10.1177/0143624412441616

Rezgui, Yacine

, Beach, Thomas

and Rana, Omer Farooq

2013. A governance approach for BIM management across lifecycle and supply chains using mixed-modes of information delivery. Journal of Civil Engineering and Management 19 (2) , pp. 239-258. 10.3846/13923730.2012.760480

Rezgui, Yacine

and Métais, Elisabeth 2013. Preface. Data & Knowledge Engineering 85 , p. 1. 10.1016/j.datak.2013.03.001

Rodenas, J. J., Gonzalez Estrada, Octavio Andres, Fuenmayor, F. J. and Chinesta, F. 2013. Enhanced error estimator based on a nearly equilibrated moving least squares recovery technique for FEM and XFEM. Computational Mechanics 52 (2) , pp. 321-344. 10.1007/s00466-012-0814-7

Rogers, Daniel J.

and Green, Tim C. 2013. An active-shunt diverter for on-load tap changers. IEEE Transactions on Power Delivery 28 (2) , pp. 649-657. 10.1109/TPWRD.2013.2243171

Rogers, Daniel J.

, Green, Tim C. and Silversides, Richard W. 2013. A low-wear onload tap changer diverter switch for frequent voltage control on distribution networks. IEEE Transactions on Power Delivery 99 , pp. 1-10. 10.1109/TPWRD.2013.2272335

Romli, Awanis, Prickett, Paul William

, Setchi, Rossitza

and Soe, Shwe 2013. A Conceptual Model for Sustainable Product Design. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Romli, Awanis, Prickett, Paul William

, Setchi, Rossitza

and Soe, Shwe 2013. A conceptual model for sustainable product design. Key Engineering Materials 572 , pp. 3-6. 10.4028/www.scientific.net/KEM.572.3

Rowe, David James, Porch, Adrian

, Barrow, David Anthony

and Allender, Christopher John 2013. Microfluidic microwave sensor for simultaneous dielectric and magnetic characterization. IEEE Transactions on Microwave Theory and Techniques 61 (1) , pp. 234-243. 10.1109/TMTT.2012.2222909

Ryan, Paul 2013. Novel venturi technology for the purpose of gas-liquid mass transfer. PhD Thesis, Cardiff University.
Item availability restricted.

S

Saini, Randeep 2013. Intelligence driven load-pull measurement strategies. PhD Thesis, Cardiff University.
Item availability restricted.

Samadi, S. Zahra, Wilson, Catherine

and Moradkhani, Hamid 2013. Uncertainty analysis of statistical downscaling models using Hadley Centre Coupled Model. Theoretical and Applied Climatology 114 (3-4) , pp. 673-690. 10.1007/s00704-013-0844-x

Samarakoon, K., Ekanayake, Janaka

and Jenkins, Nicholas

2013. Reporting available demand response. IEEE Transactions on Smart Grid 4 (4) , pp. 1842-1851. 10.1109/TSG.2013.2258045

Sani, Abdulkadir, Scholz, Miklas, Babatunde, Akintunde and Wang, Yu 2013. Impact of Water Quality Parameters on the Clogging of Vertical-Flow Constructed Wetlands Treating Urban Wastewater. Water, Air, & Soil Pollution 224 (3) , 1488. 10.1007/s11270-013-1488-2

Sapsford, Devin James

2013. New perspectives on the passive treatment of ferruginous circumneutral mine waters in the UK. Environmental Science and Pollution Research 20 (11) , pp. 7827-7836. 10.1007/s11356-013-1737-3

Sarhosis, Vasilis, Garrity, S. W. and Sheng, Y. 2013. Computational modelling of low bond strength brickwork wall/beam panels with retro-fitted reinforcement. Presented at: 12th Canadian Masonry Symposium, Vancouver, Canada, 2-5 June 2013.

Sarhosis, Vasilis, Oliveira, D. V., Lemos, J. V., Sheng, Y. and Lourenco, P. B. 2013. The behaviour of single span stone masonry skew arches. Presented at: 7th International Conference on Arch Bridges (ARCH'13), Trogir - Split, Croatia, 2-4 October 2013. ARCH '13: Proceedings of the 7th International Conference on Arch Bridges. Zagreb: SECON - CSSE, pp. 647-654.

Sarhosis, Vasilis, Yang, D., Kempka, T. and Sheng, Y. 2013. Geomechanical analysis of underground coal gasification reactor cool down for subsequent CO2 storage. Presented at: European Geosciences Union (EGU) General Assembly 2013, Vienna, Austria, 7-12 April 2013.

Sarhosis, Vasilis, Yang, D., Sheng, Y. and Kempka, T. 2013. Coupled hydro-thermal analysis of underground coal gasification rector cool down for subsequent CO2 storage. Energy Procedia 40 , pp. 428-436. 10.1016/j.egypro.2013.08.049

Sato, Yo, Ji, Ze

and van Dijk, Sander 2013. I think I have heard that one before : recurrence-based word learning with a robot. Gogate, Lakshmi and Hollich, George, eds. Theoretical and Computational Models of Word Learning: Trends in Psychology and Artificial Intelligence, IGI Global, pp. 327-349. (10.4018/978-1-4666-2973-8.ch014)

Schmid, Ulrich, Thangaraj, K., Elefsiniotis, A., Aslam, S., Becker, Th., Schmid, U., Lees, Jonathan

, Featherston, Carol Ann

, Pullin, Rhys

, Sánchez de Rojas Aldavero, José Luis and Leester-Schaedel, Monika 2013. Hybrid energy storage system for wireless sensor node powered by aircraft specific thermoelectric energy harvesting. Presented at: Smart Sensors, Actuators, and MEMS VI, Grenoble, France, 24 April 2013. Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI. , vol.8763 SPIE, p. 876307. 10.1117/12.2017691

Scholz, Miklas, Uzomah, Vincent, Almuktar, Suhad and Radet-Taligot, Julie 2013. Selecting sustainable drainage structures based on ecosystem service variables estimated by different stakeholder groups. Water 5 (4) 10.3390/w5041741

Scott, C. E. H., Eaton, Mark Jonathan

, Nutton, R. W., Wade, F. A., Pankaj, P. and Evans, Samuel Lewin

2013. Proximal tibial strain in medial unicompartmental knee replacements: A biomechanical study of implant design. The Bone & Joint Journal 95-B (10) , pp. 1339-1347. 10.1302/0301-620X.95B10.31644

Scott, M. A., Simpson, Robert Napier, Evans, J. A., Lipton, S., Bordas, Stephane Pierre Alain

, Hughes, T. J. R. and Sederberg, T. W. 2013. Isogeometric boundary element analysis using unstructured T-splines. Computer Methods in Applied Mechanics and Engineering 254 , pp. 197-221. 10.1016/j.cma.2012.11.001

Sedighi, Majid, Thomas, Hywel Rhys

, Xie, Haijian, Chen, Y. M. and Guan, C. 2013. A case study of contaminant transport and fate at a landfill site in China. Presented at: International Symposium on Coupled Phenomena in Environmental Geotechnics (ISSMGE TC 215), Torino, Italy, 1-3 July 2013. Published in: Manassero, M., Dominijanni, A., Foti, S. and Musso, G. eds. Coupled Phenomena in Environmental Geotechnics. Boca Raton, FL: CRC Press, pp. 625-630.

Shabana, Yasser, Karihaloo, Bhushan Lai

, Zhu, Hanxing

and Kulasegaram, Sivakumar

2013. Influence of processing defects on the measured properties of Cu-A12O3 composites : a forensic investigation. Composites Part A: Applied Science and Manufacturing 46 , pp. 140-146. 10.1016/j.compositesa.2012.11.004

Shahidan, Shahiron, Pullin, Rhys

, Muhamad Bunnori, Norazura and Holford, Karen Margaret

2013. Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials 45 , pp. 78-85. 10.1016/j.conbuildmat.2013.03.095

Sheeran, Liba

, Whatling, Gemma Marie

, Holt, Catherine Avril

, Beynon, Malcolm James

, Van Deursen, Robert William Martin

and Sparkes, Valerie

2013. Discriminating non-specific chronic low back pain clinical subgroups and monitoring recovery using objective classification method. Presented at: 8th Interdisciplinary World Congress on Low Back & Pelvic Pain, Dubai, 27-31 October 2013.

Shi, Lei and Setchi, Rossitza

2013. Enhanced Semantic Representation for Improved Ontology-based Information Retrieval. International Journal of Knowledge-based and Intelligent Engineering Systems 17 (2) , pp. 127-136. 10.3233/KES-130258

Shi, Lei and Setchi, Rossitza

2013. Ontology-based personalised retrieval in support of reminiscence. Knowledge-Based Systems 45 , pp. 47-61. 10.1016/j.knosys.2013.02.004

Simonovic, Julijana

2013. Synchronization in coupled systems with different type of coupling elements. Differential Equations and Dynamical Systems 21 (1-2) , pp. 141-148. 10.1007/s12591-012-0130-x

Simpson, Robert Napier, Bordas, Stephane Pierre Alain

, Lian, Haojie

and Trevelyan, J. 2013. An isogeometric boundary element method for elastostatic analysis: 2D implementation aspects. Computers and Structures 118 , pp. 2-12. 10.1016/j.compstruc.2012.12.021

Skarvelis-Kazakos, Spyros, Rikos, Evangelos, Kolentini, Efstathia, Cipcigan, Liana Mirela

and Jenkins, Nicholas

2013. Implementing agent-based emissions trading for controlling Virtual Power Plant emissions. Electric Power Systems Research 102 , pp. 1-7. 10.1016/j.epsr.2013.04.004

Slocombe, Daniel Rhys

, Porch, Adrian

, Bustarret, Etienne and Williams, Oliver A. 2013. Microwave properties of nanodiamond particles. Applied Physics Letters 102 (24) , 244102. 10.1063/1.4809823

Slocombe, Daniel Rhys, Porch, Adrian

, Bustarret, Etienne and Williams, Oliver Aneurin

2013. Microwave properties of nanodiamond particles. Applied Physics Letters 102 (24) , 244102. 10.1063/1.4809823

Smith, Robert Martin 2013. Broadband microwave push-pull power amplifiers. PhD Thesis, Cardiff University.
Item availability restricted.

Snidle, Raymond Walter

, Sharif, Khairi, Evans, Henry Peredur

and Jamali, Hazim 2013. Transient elastohydrodynamic analysis of helical gear tooth contacts. Presented at: 68th STLE Annual Meeting & Exhibition, Detroit Marriott at the Renaissance Center Detroit, MI, USA, 5-9 May 2013.

Soe, Shwe, Eyers, Daniel Roy

and Romli, Awanis 2013. Additive Tooling for Tube Hydroforming. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Soe, Shwe, Eyers, Daniel Roy

and Setchi, Rossitza

2013. Assessment of non-uniform shrinkage in the laser sintering of polymer materials. International Journal of Advanced Manufacturing Technology 68 (1-4) , pp. 111-125. 10.1007/s00170-012-4712-0

Sparks, Tim D., Bockelmann-Evans, Bettina

and Falconer, Roger Alexander

2013. Development and analytical verification of an integrated 2-D surface water-groundwater model. Water Resources Management 27 (8) , pp. 2989-3004. 10.1007/s11269-013-0327-y

Sparks, Timothy Daniel, Bockelmann-Evans, Bettina Nicole

and Falconer, Roger Alexander

2013. Laboratory validation of an integrated surface water- groundwater model. Journal of Water Resource and Protection 05 (04) , pp. 377-394. 10.4236/jwarp.2013.54038

Spears, Bryan M., Lürling, Miquel, Yasseri, Said, Castro-Castellon, Ana

, Gibbs, Max, Meis, Sebastian, McDonald, Claire, McIntosh, John, Sleep, Darren and Van Oosterhaut, Frank 2013. Lake responses following lanthanum-modified bentonite clay (Phoslock®) application: An analysis of water column lanthanum data from 16 case study lakes. Water Research 47 (15) , pp. 5930-5942. 10.1016/j.watres.2013.07.016

Spezi, Emiliano

and Leal, Antonio 2013. Special section: Selected papers from the third European workshop on Monte Carlo treatment planning (MCTP2012) PREFACE. Physics in Medicine and Biology 58 (8) 10.1088/0031-9155/58/8/E01

Srivastava, Pallavee, Bragança, Judith, Ramanan, Sutapa Roy and Kowshik, Meenal 2013. Synthesis of silver nanoparticles using haloarchaeal isolate Halococcus salifodinae BK3. Extremophiles 17 (5) , pp. 821-831. 10.1007/s00792-013-0563-3

Srivastava, Pallavee

and Kowshik, Meenal 2013. Mechanisms of metal resistance and homeostasis in haloarchaea. Archaea 2013 , 732864. 10.1155/2013/732864

Stankov, Ivan 2013. Semantically enhanced document clustering. PhD Thesis, Cardiff University.
Item availability restricted.

Stankov, Ivan Dimitrov, Todorov, Diman and Setchi, Rossitza

2013. Enhanced Cross-Domain Document Clustering with a Semantically Enhanced Text Stemmer (SETS). International Journal of Knowledge-based and Intelligent Engineering Systems 17 (2) , pp. 113-126. 10.3233/KES-130267

Stankov, Ivan Dimitrov, Todorov, Diman and Setchi, Rossitza

2013. Semantically enhanced text stemmer (SETS) for cross-domain document clustering. Presented at: KES 2012: 16th International Conferenc eon Knowledge-Based and Intelligent Information and Engineering Systems, San Sebastian, Spain, 10-12 September 2012. Published in: Grana, M., Toro, C., Howlett, R. J. and Jain, L. C. eds. Knowledge Engineering, Machine Learning and Lattice Computing with Applications: 16th International Conference, KES 2012, San Sebastian, Spain, September 10-12, 2012, Revised Selected Papers. Lecture Notes in Computer Science. Lecture Notes in Computer Science , vol.7828 Berlin and Heidelberg: Springer, 108 -118. 10.1007/978-3-642-37343-5_12

Steer, Julian Mark

and Griffiths, Anthony John 2013. Investigation of carboxylic acids and non-aqueous solvents for the selective leaching of zinc from blast furnace dust slurry. Hydrometallurgy 140 , pp. 34-41. 10.1016/j.hydromet.2013.08.011

Steer, Julian Mark

, Griffiths, Anthony John and Greenslade, Mark 2013. The effect of blending coals on their suitability for blast furnace coal injection. Presented at: International Conference on Applied Energy, Pretoria, South Africa, 1-4 July 2013.

Steer, Julian Mark

, Marsh, Richard

, Griffiths, Anthony John, Malmgren, Alf and Riley, Gerry 2013. Biomass co-firing trials on a down-fired utility boiler. Energy Conversion and Management 66 , pp. 285-294. 10.1016/j.enconman.2012.10.010

Stevens, Jonathan and Rogers, Daniel J.

2013. Control of multiple VSC-HVDC converters within an offshore AC-hub. Presented at: Energytech, 2013, Clevland, OH, Proceedings of Energytech, 2013 IEEE, 21-23 May 2013. IEEE, 10.1109/EnergyTech.2013.6645303

Stevenson, R. M., Nilsson, J., Bennett, Anthony

, Skiba-Szymanska, J., Farrer, I., Ritchie, D. A. and Shields, A. J. 2013. Quantum teleportation of laser-generated photons with an entangled-light-emitting diode. Nature Communications 4 , 2859. 10.1038/ncomms3859

Stoutenburg, Eric D., Jenkins, Nicholas

and Jacobson, Mark Z. 2013. Variability and uncertainty of wind power in the California electric power system. Wind Energy -Chichester- 17 (9) , pp. 1411-1424. 10.1002/we.1640

Sulaymon, Abbas H., Wilson, Catherine

and Alwared, Abeer I. 2013. An experimental investigation of the settling behaviour of two spheres in a power law fluid. Journal of Non-Newtonian Fluid Mechanics 192 , pp. 29-36. 10.1016/j.jnnfm.2012.09.011

Sweet, Tracy

, Sweet, Chris, Wu, Jianzhong

, Drysdale, Brian and Jenkins, Nicholas

2013. Case study vs simulation data for a grid-connected 2.45kWp PV system. Presented at: 9th Photovoltaic Science Application and Technology (PVSAT-9) Conference and Exhibition, Swansea, Wales, 10-12 April 2013. Published in: Hutchins, M. G., Cole, A. and Watson, T. M. eds. 9th photovoltaic science, applications and technology conference PVSAT-9. Abingdon: Solar Enegry Society, pp. 41-44.

Syred, Nicholas, Giles, Anthony

, Lewis, Jonathan, Abdulsada, Moahammed, Pugh, Daniel

, Valera Medina, Agustin

, Marsh, Richard

, Bowen, Philip John

and Griffiths, Anthony John 2013. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for high hydrogen content fuels in a generic swirl burner. Presented at: ICAE 2013, Pretoria, South Africa, 12-15 November 2013.

Syred, Nicholas, Giles, Anthony

, Lewis, Jonathan, Valera Medina, Agustin

, Bowen, Philip John

and Griffiths, Anthony John 2013. Tangential Velocity Effects and Correlations for Blowoff and Flashback in a Generic Swirl Burner and the Effect of a Hydrogen Containing Fuel. Presented at: 51st AIAA Aerospace Science Meeting, Texas, USA, 7-10 January 2013. 10.2514/6.2013-736

Syred, Nicholas, Valera Medina, Agustin

and Bowen, Philip John

2013. Improving swirl flow generation. Presented at: 51st AIAA Aerospace Science Meeting, Texas, USA, 7-10 January 2013. 10.2514/6.2013-596

T

Tabrizi, Shervin 2013. Study of effective methods of characterisation of magnetostriction and its fundamental effect on transformer core noise. PhD Thesis, Cardiff University.
Item availability restricted.

Tabrizi, Shervin, Anderson, Philip Ian

and Stanbury, Hugh John 2013. Round-robin assessment of the measurement of magnetostriction of grain oriented 3% silicon steel. Presented at: Soft Magnetic Materials Conference (SMM21), Budapest, Hungary, 1-4 September 2013.

Talebi, Hossein, Silani, Mohammad, Bordas, Stephane Pierre Alain

, Kerfriden, Pierre

and Rabczuk, T. 2013. Molecular dynamics/XFEM coupling by a three dimensional extended bridging domain with applications to dynamic brittle fracture. International Journal for Multiscale Computational Engineering 11 (6) , pp. 527-541. 10.1615/IntJMultCompEng.2013005838

Tang, Qi, Anderson, Philip Ian

, Wang, ZhongDong, Moses, Anthony John and Jarman, Paul 2013. Measurement of magnetic properties of electrical steels at high flux densities using an improved single sheet tester. Presented at: 18th International Symposium on High Voltage Engineering, Seoul, Korea, 25-30 August 2013.

Taysioglu, A. A., Peksoz, A., Derebasi, N. and Meydan, Turgut

2013. Influence of oxide layer coating on giant magneto-impedance response in amorphous ribbons. Sensor Letters 11 (1) , pp. 119-121. 10.1166/sl.2013.2817

Taysioglu, A. A., Peksoz, A., Derebasi, N. and Meydan, Turgut

2013. The Influence of the magnetic susceptibility of coated amorphous ribbons on giant-magneto impedance. Sensor Letters 11 (1) , pp. 81-83. 10.1166/sl.2013.2815

Taysioglu, A. A., Peksoz, A., Derebasi, N. and Meydan, Turgut

2013. Investigation of giant magneto-impedance effect in inorganic nickel coated amorphous ribbons. Sensor Letters 11 (1) , pp. 78-80. 10.1166/sl.2013.2814

Teo, F. Y., Liew, Y. S., Falconer, Roger Alexander

and Lin, Binliang

2013. Flood hazard assessment of vehicle blockages at bridges. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Teo, F., Liew, Y. S., Falconer, Roger Alexander

and Lin, Binliang

2013. Estimation of flood hazard risk relating to vehicles. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Thangaraj, Karthik, Elefsiniots, A., Becker, Th., Schmid, U., Lees, Jonathan

, Featherston, Carol Ann

and Pullin, Rhys

2013. Energy storage options for wireless sensors powered by aircraft specific thermoelectric energy harvester. Microsystem Technologies 20 (4-5) , pp. 701-707. 10.1007/s00542-013-2009-3

Theobald, Peter

2013. Fat pad lubrication properties. Wang, Q. Jane and Chung, Yip-Wah, eds. Encyclopedia of Tribology, Springer, pp. 1022-1026. (10.1007/978-0-387-92897-5_1274)

Theodoridou, Magdalini

, Ioannou, Ioannis and Philokyprou, Maria 2013. New evidence of early use of artificial pozzolanic material in mortars. Journal of Archaeological Science 40 (8) , pp. 3263-3269. 10.1016/j.jas.2013.03.027

Thomas, Hywel Rhys

, Sedighi, Majid, Al-Masum, Shakil, Vardon, Philip James, Nicolson, Duncan and Chen, A. 2013. Gas-flow/geochemistry interactions in unsaturated bentonite buffer. Presented at: Fate of repository gases project; Gas generation and migration international symposium and workshop, Luxembourg, 5-7 February 2013.

Todorov, Diman 2013. Enhanced interpretation of the Mini-Mental State Examination. PhD Thesis, Cardiff University.
Item availability restricted.

Todorov, Diman, Setchi, Rossitza

and Bayer, Antony James

2013. Linguistic markers in the sentence writing question of the mini-mental state examination for discrimination between Alzheimer's and Vascular Dementia. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: General Track Proceedings. pp. 114-123.

Tolosana-Calasanz, Rafael, Banares, Jose Angel, Cipcigan, Liana Mirela

, Rana, Omer Farooq

, Papadopoulos, Panagiotis and Pham, Congduc 2013. A Distributed In-Transit Processing Infrastructure for Forecasting Electric Vehicle Charging Demand. Presented at: 2013 13th IEEE/ACM International Symposium on Cluster, Cloud, and Grid Computing (CCGrid), Delft, Netherlands, 13-16 May 2013. Published in: Balaji, P., Epema, D. and Fahringer, T. eds. Proceedings of the 2013 13th IEEE/ACM International Symposium on Cluster, Cloud, and Grid Computing (CCGrid). Los Alamitos, CA: IEEE, pp. 538-545. 10.1109/CCGrid.2013.103

Tripathy, Snehasis

and Rees, Stephen William

2013. Suction of some polyethylene glycols commonly used for unsaturated soil testing. Geotechnical Testing Journal ASTM 36 (5) , GTJ20120041. 10.1520/GTJ20120041

U

Ugalde Loo, Carlos Ernesto

, Acha, Enrique and Licéaga-Castro, Eduardo 2013. Multi-machine power system state-space modelling for small-signal stability assessments. Applied Mathematical Modelling 37 (24) , pp. 10141-10161. 10.1016/j.apm.2013.05.047

Ugalde Loo, Carlos Ernesto

, Amezquita-Brooks,, Luis A., Liceaga-Castro, Eduardo and Liceaga-Castro, Jesus 2013. Structural robustness assessment of electric machine applications using individual channel analysis and design. Cybernetics and Physics 2 (2) , pp. 108-118.

Ugalde Loo, Carlos Ernesto

, Amezquita-Brooks, Luis Antonio, Liceaga-Castro, Eduardo and Liceaga-Castro, Jesus 2013. Structural robustness of electric machine applications using the ICAD framework. Presented at: 6th International Scientific Conference on Physics and Control (PhysCon'13), San Luis Potosi, Mexico, 26-29 August 2013.

Ugalde Loo, Carlos Ernesto

, Ekanayake, Janaka

and Jenkins, Nicholas

2013. State-space modeling of wind turbine generators for power system studies. IEEE Transactions on Industry Applications 49 (1) , pp. 223-232. 10.1109/TIA.2012.2228836

Ugalde Loo, Carlos Ernesto

, Ekanayake, Janaka

and Jenkins, Nicholas

2013. Subsynchronous resonance in a series-compensated Great Britain transmission network. IET Generation Transmission and Distribution 7 (3) , pp. 209-217. 10.1049/iet-gtd.2012.0040

Ulucanlar, S., Faulkner, A., Peirce, Susan Caroline

and Elwyn, Glyn

2013. Technology identity: The role of sociotechnical representations in the adoption of medical devices. Social Science & Medicine 98 , pp. 95-105. 10.1016/j.socscimed.2013.09.008

Uzomah, Vincent, Scholz, Miklas and Almuktar, Suhad 2013. Rapid expert tool for different professions based on estimated ecosystem variables for retrofitting of drainage systems. Computers, Environment and Urban Systems 44 10.1016/j.compenvurbsys.2013.10.008

V

Valera Medina, Agustin

, Syred, Nicholas and Bowen, Philip John

2013. Central Recirculation Zone Visualization in Confined Swirl Combustors for Terrestrial Energy. Journal of Propulsion and Power (AIAA) 29 (1) , pp. 195-204. 10.2514/1.B34600

Valera Medina, Agustin

, Syred, Nicholas, Giles, Anthony

, Bowen, Philip

and Griffiths, Anthony John 2013. Influence of the central recirculation zone strength in the blow off mechanism using different fuels. Presented at: European Combustion Meeting (ECM2013), Lund, Sweden, 25-28 June 2013.

Valizadeh, Navid, Natarajan, Sundararajan, Gonzalez Estrada, Octavio Andres, Rabczuk, Timon, Bui, Tinh Quoc and Bordas, Stephane Pierre Alain

2013. NURBS-based finite element analysis of functionally graded plates: Static bending, vibration, buckling and flutter. Composite Structures 99 , pp. 309-326. 10.1016/j.compstruct.2012.11.008

Vella, Pierre, Dimov, Stefan, Whiteside, Ben, Brousseau, Emmanuel Bruno Jean Paul

, Tuinea-Bobe, Cristina, Gant, Colin, Minev, Ekaterin and Petkov, Petko Vladev

2013. Validation of a new process chain for producing bulk metallic glass replication masters with micro and nano-scale features. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 103-108.

Vieyra, Malini and Meydan, Turgut

2013. Magnetization reversal mechanism in FeCoNiB nanowire arrays. Sensor Letters 11 (1) , pp. 131-133. 10.1166/sl.2013.2809

Vieyra, Malini, Meydan, Turgut

and Ovari, Tibor-Adrian 2013. Size and temperature dependence of the magnetic properties of electrodeposited FeCoNiB nanowires. Sensor Letters 11 (1) , pp. 205-208. 10.1166/sl.2013.2812

W

Wang, Fei 2013. Experimental and numerical analysis of river lake system and non-traditional water usage in a new Eco-City. PhD Thesis, Cardiff University.
Item availability restricted.

Wang, Bin, Li, Haijiang

and Rezgui, Yacine

2013. Intelligent Building Emergency Management Using Building Information Modelling and Game Engine. ICIC Express Letters - An International Journal of Research and Surveys 7 (3(B)) , pp. 1017-1023.

Wang, Fei and Lin, Binliang

2013. Modelling habitat suitability for fish in the fluvial and lacustrine regions of a new Eco-City. Ecological Modelling 267 , pp. 115-126. 10.1016/j.ecolmodel.2013.07.024

Wang, Sheng

, Liang, Jun

, Wen, An and Feng, Chunmei 2013. Cost and benefits analysis of VSC-HVDC schemes for offshore wind power transmission. Automation of Electric Power Systems 37 (13) , pp. 36-43.

Wang, Zhichun, Li, Juanzi, Zhao, Yue, Setchi, Rossitza

and Tang, Jie 2013. A unified approach to matching semantic data on the Web. Knowledge-Based Systems 39 , pp. 173-184. 10.1016/j.knosys.2012.10.015

Wang, Zuobin, Zhang, Jin, Hang, Lingxia, Jiang, Shilei, Liu, Guoqiang, Ji, Ze

, Tan, Chunlei and Sun, Huan 2013. Nanoscale structures for implementation of anti-reflection and self-cleaning functions. International Journal of Nanomanufacturing 9 (5/6) , pp. 520-531. 10.1504/IJNM.2013.057596

Watling, D., Whatling, Gemma Marie

and Holt, Catherine Avril

2013. 3D meniscus and tibio-femoral kinematics from MRI during joint motion and loading. Presented at: Orthopaedic Research Society, San Antonio, TX, January 26-29 2013.

Watling, Daniel, Whatling, Gemma Marie

and Holt, Catherine Avril

2013. 3D meniscal kinematics throughout knee flexion and loading: a novel in-vivo MRI study of the knee. Presented at: British Orthopaedic Research Society, Oxford, UK, 4-5 September 2013.

Watling, Daniel, Whatling, Gemma Marie

and Holt, Catherine Avril

2013. 3D meniscal kinematics throughout knee flexion and loading: a novel in-vivo MRI study of the knee. Presented at: Institution of Mechanical Engineers Biomedical Engineering Association Seminar Proceedings. Knee surgery and rehabilitation in 2013: How is engineering driving improved treatment?, London, UK, 11-12 November 2013.

Wdowski, M. M., Gittoes, M. J. R., Irwin, G. and Nokes, Leonard Derek Martin

2013. Short-term kinematic adaptation to unanticipated sprint running conditions in field sport. Presented at: 18th Annual Congress of the European College of Sport Science, Barcelona, Spain, 26-29 June 2013.

Weber, Hans, Gallichan, Daniel

, Schultz, Gerrit, Cocosco, Chris A., Littin, Sebastian, Reichardt, Wilfried, Welz, Anna, Witschey, Walter, Hennig, Jürgen and Zaitsev, Maxim 2013. Excitation and geometrically matched local encoding of curved slices. Magnetic Resonance in Medicine 69 (5) , pp. 1317-1325. 10.1002/mrm.24364

Welz, Anna, Cocosco, Chris, Dewdney, Andrew, Gallichan, Daniel

, Jia, Feng, Lehr, Heinrich, Liu, Zhenyu, Post, Hans, Schmidt, Hartmut, Schultz, Gerrit, Testud, Frederik, Weber, Hans, Witschey, Walter, Korvink, Jan, Hennig, Juergen and Zaitsev, Maxim 2013. Development and characterization of an unshielded PatLoc gradient coil for human head imaging. Concepts in Magnetic Resonance Part B Magnetic Resonance Engineering 43 (4) , pp. 111-125. 10.1002/cmr.b.21244

Whatling, Gemma Marie

, Beynon, Malcolm James

and Holt, Catherine Avril

2013. A CaRBS analysis of hip replacement approaches and non-pathology. Computer Methods in Biomechanics and Biomedical Engineering 16 (2) , pp. 175-184. 10.1080/10255842.2011.613380

Whatling, Gemma Marie

, Watling, Daniel, Forrest, Sarah, Wilson, Chris, Metcalfe, Andrew, Ismael, S. and Holt, Catherine Avril

2013. The effect of High Tibial Osteotomy surgery on knee joint loading. Presented at: Institution of Mechanical Engineers Biomedical Engineering Association Seminar Proceedings. Knee surgery and rehabilitation in 2013: How is engineering driving improved treatment?, London, 11-12 November 2013.

Whatling, Gemma Marie

, Watling, Daniel, Wilson, Christopher, Metcalfe, Andrew and Holt, Catherine Avril

2013. Biomechanical changes following high tibial osteotomy (Best poster prize). Presented at: British Orthopaedic Research Society, Oxford University, 4-5th September 2103.

Whitby, Benjamin 2013. Control of an axial flow tidal stream turbine. PhD Thesis, Cardiff University.
Item availability restricted.

Whittaker, Peter, Wilson, Catherine

, Aberle, Jochen, Rauch, Hans Peter and Xavier, Patricia 2013. A drag force model to incorporate the reconfiguration of full-scale riparian trees under hydrodynamic loading. Journal of Hydraulic Research 51 (5) , pp. 569-580. 10.1080/00221686.2013.822936

Wilbrink, D. V., Beex, Lars

and Peerlings, R. H. J. 2013. A discrete network model for bond failure and frictional sliding in fibrous materials. International Journal of Solids and Structures 50 (9) , pp. 1354-1363. 10.1016/j.ijsolstr.2013.01.012

Williams, Oludare Adebayo 2013. Beyond lean: a framework for fit production systems. PhD Thesis, Cardiff University.
Item availability restricted.

Williams, Christopher, Griffiths, Anthony John, O'Doherty, Timothy

and Giles, Anthony

2013. Utilising waste heat for steam generation within an integrated steelworks: A methodology for power generation and CO2 reduction. Presented at: 2013 ACEEE Summer Study on Energy Efficiency in Industry, Niagara Falls, NY, USA, 23-26 July 2013.

Williams, Eleri and Brousseau, Emmanuel Bruno Jean Paul

2013. Single pulse nanosecond laser processing of zirconium-based bulk metallic glass. Presented at: 4M2013: 10th International Conference on Multi-Material Micro Manufacture, San Sebastian, Spain, 8-10 October 2013. Published in: Azcarte, Sabino and Dimov, Stefan eds. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 152-155.

Wilson, Ian E. and Rezgui, Yacine

2013. Barriers to construction industry stakeholders' engagement with sustainability: toward a shared knowledge experience. Technological and Economic Development of Economy 19 (2) , pp. 289-309. 10.3846/20294913.2013.799105

Wilson, J. W., Karimian, N., Yin, W., Liu, J.

, Davis, C. L. and Peyton, A. J. 2013. Magnetic sensing for microstructural assessment of power station steels: magnetic Barkhausen noise and minor loop measurements. Presented at: 17th Sensors and Their Applications Conference, Dubrovnik, Croatia, 16-18 September 2013. Journal of Physics: Conference Series. , vol.450 (1) IOP Publishing: Conference Series, 012041. 10.1088/1742-6596/450/1/012041

Wilson, J. W., Karimian, N., Zhu, W., Yin, W., Peyton, A. J., Liu, J.

, Strangwood, M. and Davis, C. L. 2013. Towards the development of a field deployable EM inspection tool for the evaluation of power station steels. Presented at: 52nd Annual Conference of the British Institute of Non-Destructive Testing 2013 (NDT 2013), Telford, England, 10-12 September 2013. 52nd Annual Conference of the British Institute of Non-Destructive Testing 2013 (NDT 2013). British Institute of Non-Destructive Testing ( BINDT ), pp. 180-189.

Wu, Jianzhong

, He, Y. and Jenkins, Nicholas

2013. A robust state estimator for medium voltage distribution networks. IEEE Transactions on Power Systems 28 (2) , pp. 1008-1016. 10.1109/TPWRS.2012.2215927

Wu, Zhang Ming

, Raju, Gangadharan and Weaver, Paul M. 2013. Comparison of variational, differential quadrature, and approximate closed-form solution methods for buckling of highly flexurally anisotropic laminates. ASCE Journal of Engineering Mechanics 139 (8) , pp. 1073-1083. 10.1061/(ASCE)EM.1943-7889.0000468

Wu, Zhang Ming

, Weaver, Paul M. and Raju, Gangadharan 2013. Postbuckling optimisation of variable angle tow composite plates. Composite Structures 103 , pp. 34-42. 10.1016/j.compstruct.2013.03.004

Wu, Zhangming

and Raju, G. 2013. Optimisation of postbuckling behaviour of variable angle tow composite plates. Presented at: 17th International Conference on Composite Structures, ICCS17, Porto, Portugal, 17-21 June 2013.

Wu, Zhangming

, Raju, Gangadharan and Weaver, Paul M. 2013. Optimisation of variable angle tow composite plates with free edge using lamination parameters. Presented at: ICCM19: Composite Materials. International Conference., Montreal, QC, Canada, 28 July - 2 August 2013. Published in: Van Hoa, S. and Hubert, P. eds. Composite Materials. International Conference. 2013. (ICCM-19).

Wu, Zhangming

, Raju, Gangadharan and Weaver, Paul M. 2013. Postbuckling analysis of variable angle tow composite plates. International Journal of Solids and Structures 50 (10) , pp. 1770-1780. 10.1016/j.ijsolstr.2013.02.001

Wu, Zhangming

, Raju, Gangadharan and Weaver, Paul 2013. Feasible region of lamination parameters for optimization of variable angle tow (VAT) composite plates. Presented at: 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Structures, Structural Dynamics, and Materials and Co-located Conferences, Boston, MA, USA, 8-11 April 2013. 10.2514/6.2013-1481

Wu, Zhiwei, Qiu, Chunlei

, Venkatesh, V., Fraser, Hamish L., Williams, R. E. A., Viswanathan, G. B., Thomas, Matthew, Nag, S., Banerjee, Rajarshi and Loretto, Michael H. 2013. The influence of precipitation of Alpha2 on properties and microstructure in TIMETAL 6-4. Metallurgical and Materials Transactions 44 (4) , pp. 1706-1713. 10.1007/s11661-012-1530-9

Wu, Zongxiang and Wu, Jianzhong

2013. Feasibility study of district heating with CHP, thermal store and heat pump. Presented at: IET Renewable Power Generation Conference 2013, Beijing, China, 9-11 September 2013. Renewable Power Generation Conference (RPG 2013), 2nd IET. IET Conference Publications (623) Institution of Engineering and Technology, pp. 1-4. 10.1049/cp.2013.1775

X

Xia, Junqiang, Falconer, Roger Alexander

and Xiao, X. 2013. New criterion of human stability in floodwaters based on theoretical and experimental studies. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Xie, Zhihua

2013. Two-phase flow modelling of spilling and plunging breaking waves. Applied Mathematical Modelling 37 (6) , pp. 3698-3713. 10.1016/j.apm.2012.07.057

Xie, Zhihua

, Lin, Binliang

and Falconer, Roger Alexander

2013. Large-eddy simulation of the turbulent structure in compound open-channel flows. Advances in Water Resources 53 , pp. 66-75. 10.1016/j.advwatres.2012.10.009

Xie, Zhihua, Lin, Binliang

and Falconer, Roger Alexander

2013. Turbulent free surface flow over a gravel bed. Presented at: 35th IAHR World Congress, Chengdu, China, 8-13 September 2013.

Xie, Zhihua

, Lin, Binliang

, Falconer, Roger Alexander

and Maddux, Timothy B. 2013. Large-eddy simulation of turbulent open-channel flow over three-dimensional dunes. Journal of Hydraulic Research 51 (5) , pp. 494-505. 10.1080/00221686.2013.835287

Xydas, Erotokritos, Marmaras, Charalampos, Cipcigan, Liana Mirela

, Hassan, Asghar and Jenkins, Nicholas

2013. Electric vehicle load forecasting using data mining methods. Presented at: IET Hybrid and Electric Vehicles Conference (HEVC 2013), London, UK, 6-7 November 2013. Proceedings: IET Hybrid and Electric Vehicles Conference (HEVC 2013). Stevenage: IET, 10.1049/cp.2013.1914

Xydas, Erotokritos, Marmaras, Charalampos, Cipcigan, Liana Mirela

, Hassan, Asghar and Jenkins, Nicholas

2013. Forecasting electric vehicle charging demand using support vector machines. Presented at: 48th International Universities' Power Engineering Conference (UPEC 2013), Dublin, Ireland, 2-5 September 2013.

Y

Yalley, Peter Paa-Kofi and Kwan, Alan

2013. Use of waste and low energy material in building block construction. International Refereed Journal of Engineering and Science (IRJES) 2 (11) , pp. 1-5.

Yang, Haiyan 2013. Development of a physics-based morphodynamic model and its application to braided rivers. PhD Thesis, Cardiff University.
Item availability restricted.

Yang, Chen, Jiang, Chunbo and Lin, Binliang

2013. Modelling graded sediment transport and bed evolution in a tidal harbour. Journal of Coastal Research 29 (3) , pp. 736-744. 10.2112/JCOASTRES-D-12-00179.1

Yang, Xin

, Hollis, L., Adams, F., Khan, F. and Hoskins, P. R. 2013. A fast method to estimate the wall shear stress waveform in arteries. Ultrasound 21 (1) , pp. 23-28. 10.1177/1742271X12473871

Yang, Xin

, Sun, Chao, Anderson, Tom, Moran, Carmel A., Hadoke, Patrick W. F., Gray, Gillian A. and Hoskins, Peter R. 2013. Assessment of spectral doppler in preclinical ultrasound using a small-size rotating phantom. Ultrasound in Medicine & Biology 39 (8) , pp. 1491-1499. 10.1016/j.ultrasmedbio.2013.03.013

Yokoi, Kensuke

2013. A practical numerical framework for free surface flows based on CLSVOF method, multi-moment methods and density-scaled CSF model: numerical simulations of droplet splashing. Journal of Computational Physics 232 (1) , pp. 252-271. 10.1016/j.jcp.2012.08.034

Yuce, Baris

, Packianather, Michael Sylvester

, Mastrocinque, Ernesto, Pham, Duc Truong and Lambiase, Alfredo 2013. Honey bees inspired optimization method: the Bees Algorithm. Insects 4 (4) , pp. 646-662. 10.3390/insects4040646

Yusoff, Zubaida, Lees, Jonathan

, Chaudhary, Muhammad Akmal, Carrubba, Vincenzo, Choi, Heungjae

, Tasker, Paul J.

and Cripps, Stephen Charles

2013. Simple and low-cost tracking generator design in envelope tracking radio frequency power amplifier system for WCDMA applications. IET Microwaves, Antennas & Propagation 7 (10) , pp. 802-808. 10.1049/iet-map.2013.0091

Z

Zabek, Daniel

, Penton, John and Reay, David 2013. Optimization of waste heat utilization in oil field development employing a transcritical Organic Rankine Cycle (ORC) for electricity generation. Applied Thermal Engineering 59 (1-2) , pp. 363-369. 10.1016/j.applthermaleng.2013.06.001

Zanella, F., Marjanović, N., Ferrini, R., Gold, H., Haase, A., Fian, A., Stadlober, B., Müller, R., Genoe, J., Hirshy, Hassan

, Drost, A., König, M., Lee, K.-D., Ring, J., Prétôt, R., Enz, C. C. and Sallese, J.-M. 2013. Design and modeling of self-aligned nano-imprinted sub-micrometer pentacene-based organic thin-film transistors. Organic Electronics 14 (11) , pp. 2756-2761. 10.1016/j.orgel.2013.07.035

Zaraki, Abolfazl

, Mazzei, Daniele, Lazzeri, Nicole, Pieroni, Michael and De Rossi, Danilo 2013. Preliminary implementation of context-aware attention system for humanoid robots. Presented at: Living Machines: Conference on Biomimetic and Biohybrid Systems, London, 29 Jul - 2 Aug 2013. Published in: Lepora, Nathan F., Mura, Anna, Krapp, Holger G., Verschure, Paul F. M. J. and Prescott, Tony J. eds. Biomimetic and Biohybrid Systems. Lecture Notes in Computer Science. Lecture Notes in Computer Science , vol.8064 Berlin, Heidelberg: Springer Verlag, pp. 457-459. 10.1007/978-3-642-39802-5_65

Zeqiri, Bajram, Baker, Christian, Alosa, Giuseppe, Wells, Peter Neil Temple

and Liang, Hai-Dong 2013. Quantitative ultrasonic computed tomography using phase-insensitive pyroelectric detectors. Physics in Medicine and Biology 58 (15) , 5237. 10.1088/0031-9155/58/15/5237

Zhang, Hongchao, Zhu, Hanxing

, You, Junfeng and Kennedy, David

2013. Effects of cell irregularity on the elastic properties of nano-sized honeycombs. Presented at: 13th International Conference on Computational Mechanics CM13, Durham, UK, 25-27 March 2013.

Zhang, J., Zhao, Y., Zhang, Y.-h., Jin, X.-s., Zhong, W.-x., Williams, Frederick W. and Kennedy, David

2013. Non-stationary random vibration of a coupled vehicle-slab track system using a parallel algorithm based on the pseudo excitation method. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 227 (3) , pp. 203-216. 10.1177/0954409712458403

Zhang, Ning, Wu, Pengjie, Shayiremu, Duoerkun, Wu, Liyang, Shan, Hui, Ye, Lin

, Zhao, Xueqin, Cai, Jie, Jiang, Wen Guo

, Gong, Kan and Yang, Yong 2013. Suppression of renal cell carcinoma growth in vivo by forced expression of vascular endothelial growth inhibitor. International Journal of Oncology 42 (5) , pp. 1664-1673. 10.3892/ijo.2013.1877

Zhao, Wanqing

, Li, Kang and Irwin, George W. 2013. A new gradient descent approach for local learning of fuzzy neural models. IEEE Transactions on Fuzzy Systems 21 (1) , pp. 30-44. 10.1109/TFUZZ.2012.2200900

Zhao, Wanqing

, Niu, Qun, Li, Kang and Irwin, George W. 2013. A hybrid learning method for constructing compact rule-based fuzzy models. IEEE Transactions on Cybernetics 43 (6) , pp. 1807-1821. 10.1109/TSMCB.2012.2231068

Zhu, H. X, Zhang, H. C., You, Junfeng and Wang, Z. B 2013. Mechanical and geometrical properties of hierarchically nano-structured random irregular honeycombs. Presented at: 3M-NANO International, Suzhou, China, 26 - 30 August 2013. 3M-NANO International.

Zhu, Hanxing

2013. Mechanics of Macro-, Micro- and Nano-structured Hierarchical Honeycombs. Presented at: 7th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2013, Madrid, Spain, 1-4 July 2013.

Zhu, Hanxing

2013. Size-dependent elastic properties of honeycombs. Presented at: IUTAM symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, China, 8-12 August 2010. Published in: Cocks, Alan and Wang, Jianxiang eds. Iutam Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures: Proceedings of the IUTAM Symposium held in Beijing, China, 8-12 August, 2010. IUTAM Bookseries (31) New York NY: Springer Verlag, pp. 157-170. 10.1007/978-94-007-4911-5_14

Zhu, Hanxing

and Wang, Z. B. 2013. Size-Dependent and Tunable Elastic and Geometric Properties of Hierarchical Nano-Porous Materials. Science of Advanced Materials 5 (6) , pp. 677-686. 10.1166/sam.2013.1503

Zoannou, Kali-Stella, Sapsford, Devin James

and Griffiths, Anthony John 2013. Thermal degradation of monoethanolamine and its effect on CO2 capture capacity. International Journal of Greenhouse Gas Control 17 , pp. 423-430. 10.1016/j.ijggc.2013.05.026

Zou, Qing-Ping, Chen, Yongping, Cluckie, Ian, Hewston, Richard, Pan, Shunqi

, Peng, Zhong and Reeve, Dominic 2013. Ensemble prediction of coastal flood risk arising from overtopping by linking meteorological, ocean, coastal and surf zone models. Quarterly Journal of the Royal Meteorological Society 139 (671) , pp. 298-313. 10.1002/qj.2078

Ö

Özel, F. M., Davies, Huw Charles

, Ernst, C-S., Puts, G. and Glaser, N. 2013. Key Business Strategies of SMEs in North-West Europe. Presented at: 21st International Colloquium of Gerpisa, Paris, France, 12-14 June 2013.

Özel, Fatih Mehmet, Ernst, Christian Simon, Davies, Huw Charles

and Eckstein, Lutz 2013. Development of a battery electric vehicle sector in North-West Europe: Challenges and strategies. International Journal of Electric and Hybrid Vehicles 5 (1) , pp. 1-14. 10.1504/IJEHV.2013.053464

This list was generated on Wed Apr 24 18:25:36 2024 BST.